Vive Base Station Wont Turn on After Firmware Update

Virtual reality (VC) headsets
are all the rage these days. They offering a more immersive experience to the gaming globe and the chance to move around — if everything’s working properly. HTC’s latest Vive headsets, including
the impressive Cosmos
and
new Vive Pro two, are more than stable than always, but sometimes things can withal become wrong.

From “headset non found” errors to pairing bug, we’ll cover common HTC Vive problems users face. Then, nosotros’ll suggest possible fixes and provide footstep-by-pace instructions on how to address the bug you might encounter with your HTC Vive.

Issues presented with an error code

(Error 108) Headset not plant

There are a couple of ways this error tin manifest, either as an error message (error 108) or blinking red light on the headset. This is ordinarily the outcome of either a USB or a driver issue.

Possible fixes:

Beginning and foremost, make sure the headset is plugged in correctly. If in doubt, remove everything and plug it back in once more.
The power, USB, and HDMI cables from the headset should be plugged into the right slots on the link box; from there, the link box’s USB and HDMI should be plugged into the PC, and the ability cord plugged into a ability outlet.
Once properly plugged in, the LED on the headset should be greenish, indicating that it’s ready for apply.
If everything is plugged in simply the headset is non turning on, try a different outlet.

Once you’ve done that, if the issue still persists, in that location are a number of other things to try:

Reboot the headset

Step 1:
In SteamVR, right-click on the headset icon and select
Reboot Vive Headset.

Pace 2:
Wait for the reboot to complete.

Power cycle the link box

Step 1:
Shut downwards SteamVR.

Step two:
Unplug the power and USB cord from the PC side of the link box (meaning NOT the orange side of the link box).

Stride 3:
After a few minutes, plug the power and USB cord dorsum into the Link Box. If you lot run across a notification in the taskbar that a driver is installing, look for information technology to terminate.

Footstep iv:
Relaunch SteamVR. Keep in mind that you may need to repeat this process more than once in order for the error to finish appearing.

Restart your estimator

Step 1:
Quit SteamVR and reboot your computer.

Apply a dissimilar USB port

Sometimes, plugging into USB 3.0 and iii.1 ports can crusade errors. In that case, effort using a USB 2.0 port instead. If there is a USB port already in use and working — say, one that your keyboard or mouse is plugged into — try moving the Vive connection to it. If, after trying all possible USB ports, y’all however do not have a connexion, try resetting your USB devices using the post-obit steps.

Step 1:
Unplug the link cables from your PC.

Step 2:
Navigate to
SteamVR > Settings > General, and make sure the
Developer Settings
box is checked.

Pace iii:
Click
Resetin the sidebar.

Step 4:
Double-check to see if the link box’due south USB cablevision is unplugged from the PC. Click
Remove all SteamVR Devices
andclick
Yepwhen prompted.

Step 5:
Quit SteamVR, plug the link box back into your PC, and re-launch SteamVR.

If you’ve attempted every fix detailed higher up, it may be that your USB chipset is causing the effect. Cheque with
Steam’s support folio
for further explanation of compatible USB chipsets.

HTC Vive Cosmos with controllers on table. — Chuong Nguyen/Digital Trends

(Error 113) Path registry non writable

This is usually due to a lack of proper installation permissions. You lot’ll need to modify your permissions in Windows.

Modify permissions

Step 1:
Navigate to the binder you lot want to change permissions for.

Footstep 2:
Correct-click it and select
Properties.

Step 3:
Click on the
Security
tab.

Step 4:
Check the names listed in the
Group of usernames
box. If the business relationship y’all’re using does not announced, click
Add
and type the proper noun of the user y’all wish to add together. Skip this step if the username already shows upwardly.

Step five:
To change permissions, click the
Allow
or
Deny
check box in the
Permissions for User or Group
box. For the purposes of solving error 113 with the Vive, you lot’ll want to allow access.

(Error 200) Driver failed

This error bulletin indicates that the OpenVR driver failed. If you added a file or folder to the SteamVR driver directory, removing it should fix the problem. If not, you may non take the proper permission to write to the user directory.

Alter permissions

Pace 1:
Right-click in Windows Explorer and select the folder you wish to edit permissions for.

Stride 2:
Click
Properties.

Pace 3:
Click on the
Security
tab.

Step 4:
Check the names listed in the
Group or usernames
box. If the account you’re using does not appear, click
Add
and type the name of the user you wish to add. Skip this step if the username already shows up.

Step 5:
To change permissions, click the
Allow
or
Deny
checkbox in the
Permissions for User or Group
box. For the purposes of solving fault 200 with the Vive, y’all’ll want to permit access.

Error 109/400

If you lot meet this code, it’s usually because your headset isn’t connecting your GPU correctly. Double check to brand sure the link box and your principal display are continued to the same GPU in your setup. If yous have to use a laptop, brand sure the connection is using a discrete GPU. Sometimes switching to “prefer maximum performance” or like settings volition force the computer to make the right switch.

(Error 206) Driver not calibrated

Error 206 means that SteamVR was unable to load the calibration for your headset. To solve the consequence, you will need to reset your headset to force the drivers to reinstall.

Reinstall headset drivers

Footstep ane:
Unplug the headset.

Stride 2:
In SteamVR, get to
Settings > Reset, and clickRemove all SteamVR devices. Wait a moment.

Step 3:
Plug your headset back in and expect for the drivers to install.

Step 4:
If repeated attempts do not solve the issue, Valve’southward support website indicates you lot may have a faulty unit of measurement, and encourages users to
contact HTC through the company’due south website.

(Error 207) Commuter scale invalid

This error is like to error 206, in that it indicates a failure of the headset calibration to exist loaded by SteamVR. As such, the steps to solve the issue are the same.

Reinstall headset drivers

Step i:
Unplug the headset.

Pace two:
In SteamVR, go to
Settings > Reset, and clickRemove all SteamVR devices. Await a moment.

Step 3:
Plug your headset dorsum in and look for the drivers to install.

Read: Samsung Ubd M9500 Current Firmware Update 1111

If repeated attempts do not solve the result, Valve’south support website indicates you may have a faulty unit, and encourages users to
contact HTC through the company’southward website.

(Mistake 208) HMD display non constitute/(Error 208) HMD constitute over USB, but monitor not found

If you run into error 208 with the message “HMD brandish not plant” or “HMD found over USB, but monitor non constitute,” endeavour these potential fixes.

Update your graphics card drivers.
Double-check the connections for all cables — those from the headset to the link box and the link box to the PC and ability outlet alike. The power cord especially can come loose after heavy apply. This can be checked past taking off the removable cable panel on the MHD by pushing it forward.
Make sure the orangish-tipped cords from the headset are plugged into the orangish ports on the link box.

(Mistake 215) GPU connection failed

This usually happens when your graphics menu has an important update that hasn’t been installed still. Brand certain your GPU is fully updated. If you have multiple GPUs, it’s a expert idea to disable or remove all but the 1 you lot are using for Vive if this problem keeps recurring. Sometimes DisplayPort adapters tin also cause this issue and need to exist removed to set up information technology.

(Error 301) Connect failed

This indicates that vrserver.exe failed to start or connect. Sometimes, this is acquired by multiple instances of the program running at the same time.

Kill VRServer processes

Footstep i:
Quit SteamVR.

Step two:
Type
Task manager
in the Windows search bar, and open up the
Chore Manager.

Pace 3:
Locate whatsoever instances of
vrserver.exe
that may be running and quit the process.

Step 4:
Run
SteamVR.

If this doesn’t solve the upshot, Valve’due south support page instructs users to send in a system report as detailed in the introduction to this article.

HTC Vive Pro adapter. — Bill Roberson/Digital Trends

(Error 302) Init failed

This fault ways that vrserver.exe is experiencing issues starting up.

Usually, this can be fixed by simply rebooting your reckoner and trying again.
If this doesn’t solve the issue, Valve’southward back up folio instructs users to send in a system report as detailed in the introduction to this article.

(1101 through 1112) USB error

All fault letters between 1101 and 1112 are related to USB failures. Reinstalling headset USB drivers can do the play a trick on.

Reinstall headset drivers

Step 1:
Unplug your headset/linkbox, controllers, and whatever other VR devices you lot accept plugged into your PC.

Step 2:
In SteamVR, go to
Settings > Reset,and click
Remove all SteamVR USB Devices.

Stride 3:
Click
Yep.

Step 4:
Quit SteamVR.

Step five:
Reconnect your headset, this fourth dimension using a dissimilar USB port, and look for drivers to install.

Stride 6:
Restart SteamVR.

If this doesn’t solve the upshot, Valve’s back up page instructs users to ship in a arrangement report as detailed in the introduction to this commodity.

Vive headset problems

Vive Cosmos on shelf. — Dan Bakery/Digital Trends

Inside-out tracking keeps messing upwards

The inside-out tracking used in the Creation requires no setup, but some players take found that the tracking seems to skip a lot or develop inaccuracies. The key is probably somewhere in the environment itself. If yous are using a Creation in a dim room, attempt turning on brighter overhead lights. If there are mirrors or reflective surfaces around, try removing them and roofing windows to improve the experience. Too, completely blank walls can actually misfile the headset’s data collection, so having a few basic objects (outside of tripping range) may even be a adept idea.

Can’t play an older championship on a Cosmos headset

Not all Vive games piece of work with Cosmos models, and sometimes bugs forbid them from working properly. HTC reports that around 90% of Viveport’s well-nigh popular titles are compatible, but results may vary based on what you similar to play. Keep checking for updates to see if bugs are fixed or more compatibility is added.

The Vive Pro 2 has flickering or artifacts, specially at the edges

Are yous using a wired connection? Try switching to wireless. If this improves the consequence, and then your headset may take a faulty cable, or peradventure a software issues. This is a adequately common trouble that is still beingness investigated. Contact HTC to report the issue, keep SteamVR updated, and play in wireless mode for at present.

Controller batteries keep dying

Cosmos controllers final between four and eight hours. That’s a
lot
of variance, based on how often the controller sensors accept to recalibrate, lighting, and the content you lot are playing. For at present, the all-time idea is to keep a few AA batteries effectually in instance the controllers offset dying unexpectedly. HTC would like to offer built-in, rechargeable batteries at some time in the time to come, but that hasn’t happened notwithstanding.

Sound keeps breaking up or dying out

Cosmos models apply built-in headphones that rely on the USB 3.0 connectedness. If the headphones are having problems, there’south probably an issue with that connection: Make sure you are using an upward-to-date USB 3.0 port and that connections are secure. Check for cable damage to make certain nil has gone incorrect — the motility-oriented VR feel can be tougher on USB cables than many other uses.

Controller and base station problems

Controller not connected

If you find that your controller isn’t recognized by SteamVR, the LED color should give you lot a clue well-nigh what to exercise.

If bluish

When the controller LED is solid blue, information technology means that the controller is not connecting to the PC successfully. You will need to re-pair your controllers. To do so, navigate to
SteamVR > Settings > Devices > Pair Controller.

If crimson

If the controller’south LED is solid red and the controller is unresponsive, attempt resetting your controller.

Stride 1:
Simultaneously press and concord the trigger, bill of fare button, trackpad button, and grip buttons.

Stride 2:
Keeping these buttons held, plug your controller into your PC via Micro USB.

Step three:
After plugging it in, wait five seconds and so release the buttons. Your PC will announced to find a new storage device. Ignore this prompt and unplug the controller.

Step 4:
After this, the controller will be reset, and should now exist working properly.

If calorie-free is non on at all

If the LED is displaying no colour, that means the controller is not turned on. Press the system button to plough on the controller. If the controller does not plough on, then your controller needs to be charged. Plug your controllers into an outlet via the Micro USB and power adapter. While the controllers are plugged in and charging, the LED will display unlike colors:

Orange — the controller is charging.
Green — fully charged, controller turned on.
White — fully charged, controller turned off.

Read: Koyo Firmware Update Tool Dll Not Found

Controller Trackpad is twitchy or oversensitive.

If your controller is a flake squirrely or difficult to use, information technology likely needs to be calibrated or the firmware needs to be updated.

Step 1:
In SteamVR, navigate to
SteamVR > Devices > Update Firmware.

Step two:
Turn off the controller past holding down the Organization button until the LED turns off.

Pace 3:
With the controller turned off, press and concur the trigger and grip push.

Footstep 4:
While continuing to concord the trigger and grip push, printing the organization button. The controller should plow back on. When information technology does, it will make a dissimilar noise than the usual power-on noise.

One or both Base of operations Station LEDs won’t change from bluish

This generally means that the Vive base station is having difficulty stabilizing. Vibrations or movement can cause this mistake to occur.

Make certain the bases are securely mounted. If stuck to the wall, tighten all screws and the retaining nut. If on tripods, make sure that movements on the floor aren’t sending vibrations through the frame.

The Base Stations won’t leave standby mode (LEDs dim greenish)

If your Vive Lighthouse base of operations stations won’t wake up from standby, endeavour this:

Unplug the base stations and then plug them back in over again.

Bill Roberson/Digital Trends

Base Station LEDs are solid or blinking purple

This means the base of operations stations are having difficulty seeing one another.

Endeavour moving anything that may exist blocking the Vive base stations. Including yourself. Follow any on-screen instructions from Steam VR if necessary.
Make sure that the base stations are tilted at an angle that lets them see each other and the play space.

The base station LED is off

If the LED on the Vive base station is non lit upwardly, that means the base of operations station is not receiving ability.

Make sure the ability cord is plugged in.
If the base station is plugged into an outlet only not powering on, try a different outlet.

Base of operations station optical sync problems

Issues tin can occur with your base of operations station while trying to sync. Hither are some tips to brand sure they are fix upwards properly for optical sync.

Double-cheque your base station firmware is up to date. Get to
SteamVR > Devices > Update Firmware.
Be sure the path between base stations isn’t blocked, then they tin run into one some other.
Don’t set the stations as well far autonomously. They need to be within 16 feet of ane another.
Be sure the base stations are gear up to the proper modes. Press the mode button on the backs of the stations and so that ane station is set to “b” and the other “c.”
Consider mounting the base stations higher up, to make sure that your movements in the identify infinite aren’t interrupting their view.

If all the above criteria are met, the base station LED should turn solid greenish when synced. If it still doesn’t, try using the Sync Cable.

Footstep ane:
Packaged with the Vive box is a long, optional cablevision. Plug this cable into the base of operations stations.

Stride ii:
Button the mode buttons on the backs of the stations until one station displays “a” and the other “b.”

Footstep three:
If done correctly, the base station LEDs should now be solid green.

Software and headphone problems

Device icon flashing light-green in Steam VR

This means that one or more of your devices are not tracking properly (or at all). It should be easy to rectify the problem.

All devices demand to be in view of at least one base of operations station. If they are not, arrange your setup and then all devices tin can be seen.
Be sure the base of operations station is fully powered on and synced. The base station LEDs volition be green if everything is on and working correctly.
Make certain controllers are on and charged. The LEDs should exist green.
Brand certain the headset is correctly plugged in. The LED should be green.
Bank check all the firmware is upwardly to engagement. If not, consider upgrading it. Follow the on-screen instructions to practise so.

Corrupt or missing SteamVR files

An incomplete installation may cause corrupt or missing files. You need to make sure your installation is fully intact.

Stride 1:
Exit SteamVR.

Step 2:
Go to the Steam desktop customer.

Step 3:
Navigate to
Library > Tools, and right-click on SteamVR. Select
Properties.

Stride four:
Open the
Local Files
tab.

Footstep 5:
Select
Verify Integrity of Tool Cache.

No sound when using the Vive headphone port

If you’re non getting whatsoever sound through your headphones, headset, or speakers and then you’re not lone. There are lots of things you lot can try to get your Vive audio working.

Be sure SteamVR is still open up and running.
Check the headphones are definitely plugged in. If using the Deluxe Audio Headstrap, make certain the headphones connect to the headphone extension cable, and that that connects into the headset itself.
The headset may be in standby. Move it to make sure it wakes upwardly.
In steam VR, correct-click and select
Settings > Audio. From
Mirror audio to device
drop-down menu, select your desired device.
Exist certain the Vive is receiving audio from Steam VR. In Steam VR, right-click, select
Settings > Sound. In the
Ready Playback Device
drop-downwardly box, cull
HTC-VIVE.
If you are using speakers, correct-click in SteamVR and select
Settings > Audio. In the
Set Playback Device
drop-down box, choose
Speakers
or
USB-Audio Device.
Windows may not be sending audio
to the Vive headset. Correct-click on the Volume icon in the Windows taskbar, then click
Playback devices. Select
HTC-VIVE-0 and set information technology as the default device. If the Vive does not appear from this list, try selecting
Show Disabled Devices
and
Show Asunder Devices.
Make sure the Vive’s book slider in the Windows Volume Mixer is upward. Right-click the Volume icon in the Windows task tray and click
Open up Volume Mixer. Locate the slider for
HTC-VIVE-0
and ready its book to 50% or so.
Check the app or games volume. Right-click the Volume icon in the Windows chore tray and open up volume mixer. Detect the game or plan y’all are running, and make sure its volume is set to at least 50% or then.

No sound when using USB headphones with the Vive’s extra USB port

If y’all notice there’due south no audio coming through your headphones and you’re plugged into the extra USB port, hither’southward what to do:

Be certain the Vive is receiving audio from Steam VR. In Steam VR, right-click and select
Settings > Audio. In the Fix Playback Device drop-downwardly box, selectHTC-VIVE.
Windows may not exist sending audio to the Vive headset. Right-click the Volume icon in the Windows task tray and select
Playback devices. Select
HTC-VIVE-0and ready it as the default device. If the Vive does not appear from this list, try selecting
Show Disabled Devices and
Evidence Disconnected Devices.

Sound stops playing while plugged into the Vive headphone jack

A few people have had trouble with the sound cutting off while plugged into the Vive headphone jack. There are a few things worth checking to bring it dorsum.

Exist sure SteamVR is still open and running.
The headset may be in standby fashion. Move it to make sure it wakes up.
To maintain audio playback, fifty-fifty while the headset is asleep, right-click the Volume icon in the Windows task tray and then select
Playback devices. Select
2-USB Audio Device, and set it as the default device. If the Vive does not appear from this listing, endeavour selecting
Prove Disabled Devices and
Show Asunder Devices.
If the above methods exercise not solve the issue, try using a USB headset in conjunction with the Vive’s extra USB port.

Read: How to Download and Install Firmware to Linksys Re6500

Static electricity when using earbuds

If y’all go a surprise stupor from your Vive while using earbuds it might but be static. This ordinarily isn’t indicative of an effect, as a buildup of static or minor static stupor does not necessarily mean your Vive is malfunctioning and isn’t cause for worry. Information technology tin, all the same, be annoying.

Valve notes on its support page that this normally occurs in much the same way static shock builds from something like, say, socks on rug or a airship rubbing on hair.
Try using anti-static sprays and lotions, and vesture clothing made of natural fibers to reduce the buildup of static electricity.
Dry environments are especially susceptible to this, but using a humidifier should be sufficient enough to add moisture to the air and prevent any static buildup.

Vive shows every bit your reckoner’s main monitor after an upgrade

A lot of people have found that, after upgrading to Windows 10, Vive shows as the computer’s master monitor – not exactly an ideal situation. Fortunately, information technology’s very like shooting fish in a barrel to set up. Just disconnect your headset for the link box, and reboot your computer. When your figurer is finished rebooting, reconnect your headset cable to the link box. Everything should be fine at present!

Your Vive keeps skipping frames no matter what you endeavor

If this is happening with everything you try, information technology’s probably because of how your figurer is controlling the display. There are a lot of settings that tin can crusade this, simply ane of the most common is dark mode. Check your computer and brand sure no night style settings are enabled. Likewise make certain you aren’t running any other types of software that deliberately change how your computer’s display looks.

Variable brightness or images that go on darkening

Newer headsets like the Vive Pro 2 may feel some problems with their automatic effulgence adjustments. Users may observe that the screen switches brightness levels in a distracting way, or immediately darkens when looking in a specific direction, making visibility a problem.

If you lot observe this is a problem, visit SteamVR settings. SteamVR recently added a universal brightness slider to control brightness manually. You may also want to see if in that location are in-game options for adjusting the brightness.

Vive Wireless Adapter problems

The HTC Vive Wireless Adapter is ane of the all-time upgrades you can make to your VR experience for room-scale play, but the experience isn’t error-gratuitous.

No power to the headset

If yous find that your headset doesn’t work or ability on at all with the Vive wireless installed, try these fixes.

Make sure that the battery is plugged into the Vive Wireless adapter via the USB cable.
Make certain the Vive Wireless adapter is plugged into the Vive headset with all iii cables.
Make sure the battery is charged. Press the button on it to cheque.
Press the button on the battery, followed by the push button on the Vive Wireless Adapter to turn them both on.

If y’all have washed all of the to a higher place, endeavor running the Vive Wireless connection software again, then launch SteamVR.

Stuck initializing

If y’all notice that the Vive Wireless connexion awarding gets stuck on “Initializing,” or any of its other intermediary steps, at that place are some things you tin endeavour that should fix it.

Make sure that yous aren’t over-extending the wireless transmitter/receiver. The coaxial cable for the wireless transmitter/receiver can be extended by a further 2M, only across that, y’all are likely to confront problems. Information technology’s besides worth making certain that it’s a high-quality coaxial cablevision that you’re using.
Make sure that the Vive Wireless Adapter is within visual range of the wireless transmitter/receiver. 30ft is about the maximum range they should be autonomously.
Try changing the PCI-Express card to a dissimilar PCIe slot.

If none of that works, try the following:

Step 1:
Search for
Device Manager in the Windows search box and select the corresponding result.

Step two:
Discover the
Intel Wireless Gigabit VR Adapters
and click the pointer side by side to it. Correct-click the
Intel Wireless Gigabit W11100 VR Device
and select
Disable.

Stride 3:

Now, correct click on Intel Wireless Gigabit W11100 VR Device and select the “Enable” option.

After that, you can effort to run the Vive Wireless awarding again. If everything goes according to plan, it should now discover your headset.

Grey screen during play

Check the Vive Wireless Adapter to make sure it’s not too hot. If the adapter exceeds maximum temperature limits, it volition turn off and halt your VR functioning until it cools off enough to start over again. You maintain cool temperatures by adjusting your thermostat to a lower temperature, pointing a portable fan straight on the adapter, or strategically planning breaks in usage.
Give your batteries a full charge. If your batteries are fast approaching a low charge, your gaming experience will become slow and erratic.
Make sure that there is a clear and visible path betwixt your headset, the receiver, and the transmitter.

Despite the kinks in connecting VR headsets to your devices, VR headsets are in loftier demand, gaining popularity past the infinitesimal. Nosotros are confident that this article provides you with thorough guidelines to appraise and resolve any future problems you may accept with HTC Vive.