Runcam 2 Hd Problems With the Latest Firmware
Runcam Split2 WIFI card
Posted by
Unknown
on twelfth Sep 2018
A great camera both in size and resolution.
The possibility of recording to memory card in full HD is great.
I find the WIFI card to be inconvenient in how it is placed on the PCB. This make information technology hard to incorporate into some enclosures.
Would exist great if analog video could be displayed at the aforementioned time as WIFI is on.
Could exist equipped with some sort of cable in guild to position it according to users application.
Great Photographic camera
Posted by
Unknown
on fourth Sep 2018
Overnice Quality of image, some issues with focus, but dainty contact with back up and all solved. Now im going for another one.
works great
Posted by
kenneth mccormack
on 30th Aug 2018
Works great. Easy to install. Lots of install options and hardware provided. Very good high res video.
good product with high recordered video quality, but wdr can be improved
Posted past
lorenzo
on 14th Aug 2018
Wdr need to be improoved
Low latency
Excellent video quality
Adept sound
Control with uart doesn’t work with betaflight three.4
Cracking for the price
Posted by
H2S
on 21st Jul 2018
I had no issues with it, just plug and play. Yous accept to be carefull with the ribbon cable connecting camera to the main lath, if you install information technology wrong way the chief board won’t turn on.
Good support
Posted by
Unknown
on 4th Jul 2018
I had a problem with a runcam split main board with no damage only non working correctly. The support team helped me fix it with a replacement board.
The but problem I take is the buttons on the side are a flake susceptible to harm.
perfect
Posted past
David
on 14th Jun 2018
Perfect cam for FPV and Hard disk drive!
Very good quality
better paradigm merely noticable lack in response
Posted by
Aaron Sommers
on 25th Mar 2018
I’ve owned the Runcam three and flew with the original Hawkeye prior to installing this corking device that does both, merely possibly non every bit well.
The Runcam 3 blew me away with information technology’south image quality and was expecting just that however was a little let downwards with the Runcam Split v2 with no way of correcting without switching up the lenses. Information technology would be great if color hue could be adapted through the software.
The latency of the Split up 2 is also lagging especially when compared to the Eagle. Also compared, is not as detailed.
These bug tin however be easily adapted to and I would however recommend for I recall it is the best out in that location.
Relish the view
Posted by
TheMadmacs
on 9th Mar 2018
i have the split 1 and ii, i’m very pleased with both, the hard disk drive footage is fantastic, the fpv feed is superb. employ it with a new sd card, 32gb ultra and above, cards get old later on 500 writes.
Wow!!!!
Posted past
Lee Morgan
on seventh Mar 2018
Beautiful camera, it comes with different length leads, really well made. Really pleased with it’s picture quality.
Would recommend!!
Super Cam
Posted past
Unknown
on 3rd Feb 2018
Works nicely, good App for mobile with wifi connectivity
Fantastic!
Posted by
lukas
on 3rd Jan 2018
To be honest one of the most easiest camera to instal in a drone video quality comparing with other retail cameras its pretty decsent .. overall delighted with my purchase
best cam i e’er had
Posted past
Adrian Then
on 24th November 2017
First time try out the runcan dissever 2. I can say this is a very adept products information technology save my weight on my quad without use my gopro . The video is very clear and nice colour . I will recommend to my friends to buy this. Thanks Runcan for this great spilt 2 .
dissever 2 rig rewiew
Posted past
wooo
on 19th November 2017
NTSC 1080 60 fps works all-time
no noise nor jello detected
re-video review: https://youtu.be/3vcj91oGT-c
1080P 60Fps for 1/iii the weight of a GoPRO (Vive la Revolution!) really 3.4 Splits with 3 cameras = weight of a GoPRO Session 4
Posted by
Scott McClarin
on 18th November 2017
A existent review from a get-go time user of the RunCam Split 2. For RC and Remote control devices that utilize FPV and desire to record 1080P at lx frames per 2d, and proceed the weight downwards, this is a game changing product…Editing software should take been a quick licencing agreement and a Rebranded URL for boosted finish user support. if y’all could become the Latency down around 26-20ms as with other Boob tube out Cameras, A huge segment (anybody racing and posting freestyle videos) would cover what RunCam has been developing. I am using direct Solder to Camera voltage 5V 3A and basis equally directed on my Flying controller (Lumenier Blastoff All in one, same as Sunrise Siskin, or RacerStar Tatto-Due south F4S) on a racing Quadcopter. I am using a 2200uF 25V capacitor on VBAT Terminals, Micro SD card is a Sandisk U3 UHS speed rated 64GB Ultra Micro SD no frames dropped just buttery smooth video is beingness recorded. My Dissever two board is installed above my AIO FC+ESC PCB in a Dquad Obsession V2 frame using T5046C DAL Cyclones because they are well balanced out of the parcel and reduce vibraitons…I can go xxx-40 caste aligning using the stock mounting holes with some modification to where I mount the Bracket, also had to Dremel a bevel to avoid squashing wires against the lath. Soft mounting your motors+ Bolts and Flight stack (using motor mounts above and below the arms, + four soft mounts for both boards) is optimal to reduce jello, photographic camera is difficult mounted, with little to no jello (Serious). When Hovering next to areas with high texture there is inappreciably noticeable jello at the edges of the frame with tree branches, everything else looks solid. I take it set to record when a battery is connected (stock) I volition say when overcast you need to utilize Cloudy setting to get correct exposure..otherwise Motorcar exposure with WDR does a keen job, on overcast days the sky volition force the ground below to exist underexposed, just change the setting for that situation, and perhaps open desert with the same situation. be careful not to bend the metal shield (very easy to bend) as this may affect how the SD card holder interacts with the SD Card. This is actually a better method than the swinging gate clip in the V1, though I would take liked to see a better connection (better Soldering) of the USB port to the board…mine has come up loose after using my USB port 3 times and I am going to have to resolder it down…For what it does this little Hd onboard Camera actually shines. I however get four-5 minute flights while recording as well, noted in my v minute video segments from outset to finish. I am using the Wifi setup with a Kindle Burn down, had to download the right APP version, but information technology works…its a little Klunky to get gear up, but it works, and in one case you lot become used to the buttons you tin alter a setting before you have a VTX or are fix for FPV in about 1-ii minutes. Future wishes: Lower Latency is a priority, 4K recording would exist the next stride equally you compete in the action photographic camera market place..A Runcam Split Micro with a smaller board(20mmx20mm) and Micro Cam would brand shockwaves + Simply make information technology happen with the same spec lighter weight. I do like how it can also function similar a dashcam and am considering getting another just to alive in my auto with a separate LiThion battery in a 3D printed housing, clipped to my Rearview mirror facing out the front. For weight savings lonely the Split is worth putting on your quad or Fly, or anything you tin think of that gives FPV and records high definition. I would welcome a lower resolution mode if it improved the latency. Fifty-fifty if you had ii cameras as part of the system, one a depression latency micro camera, the other a Hard disk recorder, it would yet be lighter than 1/2 the weight of a GoPro (GoSlow) Cube. If you could adhere 2 cameras and switch the feed or record from both at the same time that would exist additionally exciting, especially for racing footage. Ooh and If I were to dream large, you could licence with Feiyutech and market a micro gimbal for the Split camera that could fit near every sub 250mm quqdcopter, turning them into movie theatre shine video options.They allready make a Plug and Play version for the GoPro Session, but a smaller one for the Split photographic camera would exist a segment changing intrusion into what information technology takes two companys to do currently with regard to a 4K camera on a 3D gimbal in a pocket-size form factor. Doing this with a college res or current res split would be another game changer….cheers for the opportunity to share my impression and initial thoughts. The broad Voltage input on the V2 is also greatly appreciated!
Review RunCam Split 2
Posted by
Daniel Wagner
on 18th Nov 2017
Ich habe die Kamera vor ein paar Wochen gekauft und bin hoch zufrieden. Dice Latenz ist kaum spürbar. Dice Aufnahmen haben eine Summit Qualität. Dice Einnstellungen sind Kindeleicht über Wlan und der App zu bedienen.
Leider habe ich auch einen Nachteil gefunden:
Dice Farben meiner Vorgänger Kamera (Swift2) waren Kräftiger und die Restlichtverstärkung war besser (FPV-Bild)
Für die Carve up two wünsche ich mir eine bessere Restlichtverstärkung und etwas kräftigere Farben.
Fazit:
TOP KAMERA
Preis Leistung absolut top.
Vorteil ist auch die variable Versorgungsspannung. Der Gewichtsvorteil zu einer regulären Actioncam ist auf jeden Fall den Kauf wert.
Awesome hardware, i wish runcam made editing software.
Posted past
Unknown
on 15th Nov 2017
I dearest this camera. The FPV quality is top-notch, and the Hd output is nice too. I of my biggest complaints is the encoding. It outputs to .mov, which is challenging to edit with free esitors unless you lot ain a Mac. If Runcam had a decent video editing software that would also let me ingather out the props, life would be much easier, and it would put them on par with GoPro, who has editing software.
Exceeded my expectations
Posted by
Todd
on 2nd Nov 2017
Bear in heed tat I’m new-ish to the hobby and that this is my outset upgrade from the Sorcerer X220’s camera. That aside, this is such a great piece of tech. The difference between the FPV feed of this and my previous camera is literally unbelievable. The sunday looks similar the sun, and not a blackness dot. Colors are bright and stay the aforementioned whether facing the sun or not. The HS video quality is every bit as good every bit the activity cam that it replaced (it died in a crash). That’s a good segue into why this is so dandy – the action cam is protected in the frame. That’s worth a lot to me. It also gets read of the heavy wart on the nose of my quad, which is another huge plus – less weight = more run fourth dimension. You can encounter the props in the HD feed, but I tin edit that out, so it’due south not a matter. Cheers RunCam – this is only what I needed.
