How to Clean Brother Dcp J125 Printer Head

If your documents are coming out of a Brother printer with streaks and smudges, don’t worry! You don’t have to think most replacing it just yet. A simple cleaning tin can help become your printer in like-new condition. Often, all you lot need to practise is run a cleaning cycle. However, if in that location is a lot of dried ink in the printer, you may demand to unclog the print head nozzles. Finally, make clean the rollers for streak-free print jobs.

1
Select the Ink option on the screen of your printer.
If there is an Ink key on your printer, press it. If not, go to Menu and use the arrow and OK buttons to select Ink. For a touchscreen printer, either select Ink on the screen, or look for a square symbol with black, xanthous, blue, and magenta lines. This is the Ink Indicator.^[ane]
- You can make clean either the black ink, the color ink, or both.
2
Select Cleaning to run a cleaning bike.
This is the easiest way to make clean the printer if something seems off. The printer will take a few minutes to clean one-time ink out of the print caput, resulting in a cleaner impress.^[two]
- If you notice that your print jobs are coming out smudged or sloppy-looking, a cleaning bike might take intendance of the problem.
Advertisement
3
Exit the printer lonely while the cleaning cycle is in progress.
The cleaning cycle takes a few minutes and y’all won’t be able to print anything or select other options on the menu. Don’t unplug the printer while the bike is running.^[iii]
- In one case the cleaning is washed, the printer will automatically go dorsum to the habitation screen, ready to print.
4
Test print a ane-page certificate.
To see if the cleaning worked, endeavour press a single page. Check it for smudges. Make certain to print something in color if you cleaned the color ink or in blackness and white if you cleaned the black ink.^[iv]
- If the printing yet looks off, you may have to run some other cleaning bike or unclog the print head nozzles.
5
Run up to 4 cleaning cycles in a row.
Sometimes, y’all will need to run more than 1 cleaning cycle to get the best results. However, effort not to run more than than iv cycles in a row, as the process can actually offset to draw ink out of the cartridges, making the cleaning less constructive and wasting expensive ink.^[v]
- If the printing withal doesn’t look right later several cleaning cycles, try printing ten pages to see if this clears the nozzles.
Advertizing

1
Start a cleaning cycle and open the superlative of the printer.
Use the menu on screen to start a cleaning cycle. Open the unabridged elevation of the printer, not merely the scanner. The whole top should lift open with no resistance.^[6]
- You will see the print caput moving back and forth when you open the printer.
two
Unplug the printer when the print head moves all the mode to the left.
The print head is hard to clean when it is in its default position on the right side of the printer, but the printer needs to be off before y’all start cleaning it. Wait until the print head moves over and then unplug the printer.
- The printhead is the square piece of the printer that you run across moving when y’all open the acme of the printer.
3
Place a piece of blotting paper under the impress caput.
A paper towel works well because it tin can absorb the cleaning fluid and actress ink. Fold the paper towel into a long strip that will fit over the impress head rail, and then slide the caput over it.^[7]
- The print caput doesn’t demand to be all the mode in the middle of the printer, just onto the newspaper towel.
4
Remove the ink cartridges from the printer.
This will expose the nozzles that take the ink from the cartridge and feed information technology into the impress head. The bottom gear up of nozzles are the ones that need to be cleaned.^[eight]
- To salvage the ink cartridges, wrap them in cling film.
5
Use a syringe to inject 4 millilitres (0.xiv fl oz) of water into the nozzle.
You can buy plastic tubing at hardware stores and cutting it to around iii–iv inches (7.6–10.ii cm) using scissors. Purchase some in a width slightly larger than the size of the nozzle. Employ a short length of plastic tubing to connect the end of the syringe to the nozzle. Then, press gently to slowly inject a pocket-sized amount of distilled water into the nozzle. Using water that is non distilled can clog the print head even more with minerals. This will affluent out any remaining ink. Let the water soak for v minutes.^[9]
- You can besides buy cleaning fluids specifically for printers online.
- If you tin’t inject any fluid, you may take to supersede your printer.
half dozen
Return the print head to the right and put the cartridges back.
Remove the paper towel and put the print head dorsum in its “parked” position at the right side of the printer. Put the ink cartridges dorsum in the printer. Then, plug in the printer and run a cleaning bicycle.^[10]
- The newspaper towel will be full of ink. Exist conscientious when you are removing it from the printer, and wear rubber gloves if you want to protect your hands.
- Once the printer is done priming the heads and running the cleaning cycle, you tin print out a examination document. Impress a document with both color and black and white elements to be sure all of the nozzles were cleaned. Print a small prototype that takes up virtually 1/iv of the page if yous don’t want to waste too much ink.
Advertisement

Read: Cara Menghubungkan Printer Canon Mg2570 Ke Laptop

1
Turn the printer off and unplug it.
The printer needs to be off earlier you showtime cleaning the rollers. Unplugging it ensures there is no ability flowing to the printer while you are cleaning.^[11]
- You volition employ h2o to clean the printer, then this is specially important.
2
Wipe the separator pad in the newspaper tray with a damp cloth.
Take the paper tray out of the printer. The separator pad will be at the front edge of the tray, at the centre. It is directly above the handle you lot use to remove the tray.
- For inkjet printers, the rollers might be located underneath an access console. Open the panel under the tray. You may have to remove a toner cartridge, also. A
  ^[12]
- Make sure to use a soft cloth that is damp, not moisture.
- Do not use any cleaning fluid, equally this tin can impairment the printer parts.
3
Use the fabric to wipe the selection-up rollers.
The pick-upwards rollers are minor, grey rollers about

^ane⁄₂

inch (1.iii cm) broad located inside the printer on the front side, above the paper tray. At that place are 2 of them.^[thirteen]
- Be sure to rotate the roller to make clean it on all sides.
4
Put the paper tray back in and print something to test it.
A make clean pick-upward roller volition help feed the newspaper correctly and print without streaks. Print a few pages to make certain the cleaning worked. Printing a black and white text document will be sufficient to see if the rollers are clean.^[14]
- If the rollers are damaged, yous may take to take the printer to a repair shop to replace them.
Advertisement

Read: Cara Mengatasi Kertas Macet Pada Printer Epson L120

1
Turn off the printer and open up it up.
Make sure the printer is off earlier you begin. Open the printer by looking for a lever underneath the impress tray. The printer will either elevator up or forward to open.^[15]
- You tin can unplug the printer to make sure information technology is off.
2
Use a textile to gently wipe the print heads if the printer opens on peak.
The impress heads are the horizontal, metallic pieces underneath the tiptop of the printer. Wipe back and along with a dry cloth to remove any dry ink or lint.^[16]
- Wipe gently and then that you lot don’t damage any parts.
3
Pull the toner tray out if the printer opens in front.
If the printer opens on one side, rather than on top, pull out the toner tray. The toner tray volition have a handle that you can use to easily slide it out.^[17]
- If the printer opens on top, y’all don’t demand to pull anything out.
iv
Have out the toner cartridges if the tray pulls out.
If your printer is 1 of the models with a pull-out toner tray, take the cartridges out. The toner cartridges volition lift out of the tray.^[18]
- The print head for this kind of printer model is underneath the cartridges.
five
Slide the tab nether the toner cartridges back and forth.
If you are using a model with a toner tray that pulls out, there will be a tab underneath the toner cartridges on the drums. Sliding the tab dorsum and forth around 12 times cleans the print caput.^[19]
- The tab will be either bluish or light-green.
6
Rotate the drums under the toner cartridges and wipe any ink.
Look for a cog on one side of the drum. Use ane finger to rotate the cog and look for ink on the drums. Wipe whatever ink up with a dry material.^[20]
- Utilize a dry, soft, clean cloth to wipe the drums.
seven
Put the toner cartridges dorsum and shut the printer.
If y’all took the toner cartridges out, put them back into the printer. If not, only close the printer.^[21]
- One time everything is back in identify, yous can plough the printer back on.
viii
Run a calibration cycle, if necessary.
On newer models, the printer volition recalibrate automatically. On older models, you may accept to become into the menu and find a calibration cycle. It will take a few minutes for the printer to recalibrate.^[22]
- The calibration cycle is located in a different location on every printer. Await for its exact location in your printer’s manual.
- Impress a test page to make certain the printer is back to normal. Print a page using color and black ink to make certain all of the cartridges are working every bit they should exist. A small image taking up one/4 of the page should exist sufficient.
Advertisement

Read: 4 Port Usb 2.0 Automatic Printer Switch

Ask a Question

200 characters left

Include your electronic mail address to become a message when this question is answered.

Submit

Print at least in one case a week to keep the nozzles free of dried ink.
Use high quality ink cartridges.

Thank you for submitting a tip for review!

Advertizement

Things Y’all’ll Demand

Soft cloth or paper towel
Distilled water

Cling film
Syringe
Plastic tubing
Cleaning fluid (optional)

Virtually This Article

Thanks to all authors for creating a page that has been read 49,326 times.