How to Change Ip Address in Thermal Printer
Guide | MobiPOS >General >Irresolute Printer IP Address
Irresolute Printer IP Address
This guide explains how to change the IP address of a printer by using an iPad or Mac.
The aim is to have both the iPad and the printer share the same subnet every bit the router.
Users should identify the IP address of the iPad, router and printer beforehand.
To place the iPad’s IP Address:
Open MobiPOS application, upon logging in, continue to Settings -> Terminal.
Turn on Multiple Concluding Ordering, yous will meet your IP address is existence shown.
If an error is shown instead of the IP address, it means that the iPad is not connected to Wi-Fi.
To identify the printer’due south IP Accost:
Click and concord the feed button, then plough on the printer.
Continue holding on to the feed button while the printer is powering on.
It should print out a configuration sail at the cease.
To place the router’s IP Address:
If your iPad is already connected to the Wi-Fi router, you should find your Wi-Fi router IP address in iPad Settings.
Go under Settings -> Wi-Fi, click on the Info push button beside the connected network.
After identifying all devices’ IP addresses, we will proceed to perform the change.
Using iPad
All devices involved should be connected to the same Wi-Fi router.
The printer should be connected to the router via LAN cable and the iPad is connected to the router through Wi-Fi.
In this example, the initial IP address for each device is as below:
iPad – 192.168.0.102
Router – 192.168.0.1
Printer – 192.168.192.168
For the printer and the iPad to work together, both of them take to be in the same subnet.
Information technology means that either the iPad IP address has to be 192.168.192.Thirty or the printer’s IP address has to be 192.168.0.XXX.
Withal, in that location is no style for us to alter the printer’due south IP address since we can’t communicate with it right now.
Therefore, the IP address for the iPad should commencement be changed.
And so, upon connection, users will be able to change the printer IP address to the same subnet as the router.
Summary:
1) To change the iPad IP address to friction match the printer’due south subnet.
ii) The connexion between both devices can at present exist established, proceed to do configuration changes in the printer.
3) Change the printer’s IP to match router’south subnet.
4) Modify the iPad’due south IP address back to its original IP address.
v) All devices are now in the aforementioned subnet, the printer works with MobiPOS now.
Firstly, on the iPad, get to Settings -> Wi-Fi as shown below.
Tap on the connected Wi-Fi tab on the correct equally shown beneath.
Upon tapping on the continued Wi-Fi tab, the screen will be shown as below.
Users are required to modify the IP configuration to the manual.
To change it, tap on “Configure IP” as shown below.
Upon tapping it, the screen will exist shown as beneath.
Select “Manual”, then key in the desired IP accost of the iPad manually.
Adjacent, key in the IP accost, Subnet Mask and Router IP as shown below.
Do note that each device has its own IP accost and cannot be overlapped.
As displayed in the screenshot to a higher place, the IP address for the iPad has been changed to 192.168.192.200.
Now, the IP address for iPad, printer and the Wi-Fi router is:
iPad – 192.168.192.102
Printer – 192.168.192.168
Router – 192.168.0.1
Do not go confused with the router IP address (192.168.192.1) entered in the settings.
The actual IP address of the router is still 192.168.0.1, but doing so information technology confuses the iPad, thus assuasive it to communicate with the printer.
Regardless of what the router IP address now is, the iPad and printer are under the same subnet and they are able to communicate with each other.
* If your printer’due south IP Address is 192.168.i.200, and then you will need to change your iPad IP address to 192.168.ane.XXX instead.
30 significant any number from 1-255. Withal, do not employ 200 in this example as it is taken past the printer.
After configuring the IP address for iPad manually, go to Safari, key in the printer IP address, and press Enter.
As mentioned earlier, the IP accost for the printer was initially 192.168.192.168.
Upon pressing Enter, the printer configuration page will be shown every bit below.
If the website asks for a password, try both “epson” for username and password.
To change the the printer IP accost, tap on the IP address tab on the right every bit shown below.
And then, key in the new IP address for the printer.
In this example, to lucifer the router’s subnet, the new IP address for the printer is prepare to 192.168.0.200 as shown in the image below.
Click “Submit” then continue to reset the printer.
Now, the IP accost for the printer should take changed successfully.
Next, on the iPad, go to Settings -> Wi-Fi -> Configure IP.
Tap on “Configure IP” and tap on “Automatic”.
This is to reset the iPad IP accost back to the aforementioned subnet as the Wi-Fi router.
Now, the IP accost of each device should exist:
iPad – 192.168.0.102
Printer – 192.168.0.200
Router – 192.168.0.1
All the devices at present share the same subnet.
Users can proceed to cardinal in the printer’s IP address in MobiPOS app.
Try to do a test print to see if it works.
Using Mac
Alternatively, users tin too change the printer IP address by using Mac.
Earlier keying in the IP address, you have to find out your printer’s IP accost.
This can be done past holding the feed button and power on the printer.
A configuration canvas will be printed out with the printer’s IP address on it.
In this example, the initial IP address for each device is:
Mac – 192.168.0.166
Subnet Mask – 255.255.255.0
Router – 192.168.0.i
Printer – 192.168.192.168
ane) On the top correct of the Mac screen, click on the Wi-Fi icon.
Then, click on ‘Open Network Preferences…’.
Upon clicking it, the screen will exist shown as below.
Every bit shown in the image beneath, the Mac IP accost is 192.168.0.166.
2) Click on the ‘+’ button on the left bottom corner as shown below.
3) Upon clicking the “+” push, at that place will be a pop-up shown.
Select “Wi-Fi” and leave the Service Name as Wi-Fi two.
And so, click on “Create”.
four) Now, reset the IP accost for Mac.
On the top bar, click on TCP/IP and choose ‘Using DHCP with a manual address’.
Then, under IPv4 Accost, key in the new Mac IP address as 192.168.192.i.
Proceed to click ‘OK’ and click ‘Apply’.
5) Next, go to Safari or Google Chrome browser.
Type in the IP address of the printer, “192.168.192.168” and press enter. Users should be able to see the printer configuration folio as shown as below.
And so, click on “TCP/IP” to observe the IP address.
6) Under the IP Address tab, key in the new printer’s IP address equally shown below.
Then, click ‘Submit’ to continue to reset the printer.
Now, the IP address for the printer should have changed successfully.
Next, go to MobiPOS application, key in ‘192.168.0.200’ as the IP address and 9100 as the port.
Practise a exam impress to meet if it works.
If it does, go dorsum to your Mac, select Wi-Fi ii, and click the ‘-‘ button on the left lesser to delete this network.
The IP address of each device now should be:
Mac – 192.168.0.166
Printer – 192.168.0.200.
Router – 192.168.0.1
All the devices at present share the same subnet.