When you are trying to add a network shared printer, if yous receive message “Windows cannot connect to the printer.”(unremarkably occur to Windows 7), you must exist very frustrated. Merely don’t worry. You can employ solutions in this mail service to set up the problem. Each solution has been reported to be useful. So try all of them until y’all have the trouble stock-still.

The error would appear with a specific error code like 0x0000007e. The virtually common error codes are as follows:

Windows Cannot Connect to the Printer Windows 7

Windows Cannot Connect to the Printer – Operation Failed with Fault 0x0000007e

Windows Cannot Connect to the Printer – Operation Failed with Error 0x00000002

Windows Cannot Connect to the Printer – Performance Failed with Error 0x0000007a


Solution i: Restart Impress Spooler Service



Solution 2: Create a New Local Port



Solution 3: Delete Printer Drivers



Solution 4: Copy “mscms.dll” Manually



Solution 5: Delete a Subkey


Solution ane: Restart Print Spooler Service

Follow steps below to stop Print Spooler service and then commencement information technology over again.

one. Press
Win+R
(Windows logo key and R central) at the same time. A Run dialog box volition open.

2. Typeservices.msc
in the run box and  click
OK
push.

3. In the
Name
listing, locate and double-click on serviceImpress Spooler.

3. Under Service status, click
Cease
button.

iv. Click
Start
button to get-go the service again.

v. Click
OK
push.

After that, add the printer again and come across if the problem persists.

Solution 2: Create a New Local Port

Follow these steps:

Read:  Setelah Mengisi Tinta Printer Apa Yang Harus Dilakukan

1. Open
Command Panel.

2. View past Big icons, click
Devices and Printers.

three. Click
Add a printer
at the meridian of the window.
Note:
To go on, you demand to login to the computer as an administrator.

4. Select
Add a network, wireless or Bluetooth printer.

five. Select
Create a new port, change the “Blazon of port” to
Local Port
then click
Side by side
button.

half dozen.
Enter a port proper name
in the box. The port name is the printer’s accost. The accost format is\\IP accost or the Figurer Name\Printer’s Name
(refer to the following screen).  Then click
OK
button.

vii. Select the
printer model
from the directory and click
Next
button.

8. Follow the rest on-screen instructions to cease adding the printer.


Solution iii: Delete Printer Drivers

The trouble can exist caused by printer drivers. So you can effort to remove the drivers and install them again.

Follow steps below:

1. Press
Win+R
(Windows logo key and R central) at the same fourth dimension. A Run dialog box will open up.

two. Blazonprintmanagement.msc
in the run box and click
OK
button.

3. In the left pane, click
All Drivers.

4. In the right pane, right-click on the printer driver and click
Delete
on the popular-up menu.

If you see more than i printer driver names, repeat steps in a higher place to remove them ane past one.

5. Add the printer once again.

If the trouble persists, y’all may want to install the driver manually. You tin download and install the driver from the printer manufacturer’s website.

Read:  Harga Epson L200 All in One Printer

If you lot have difficulty downloading the driver manually, yous can utilise

Driver Easy

to help you. Driver Like shooting fish in a barrel can scan your estimator to detect all problem drivers and then provide you with new drivers instantly.

Download its Gratuitous version to have a effort
. If yous observe it helpful, you can consider upgrading to the Pro version. The Pro version allows you to update all drivers with merely one-click.

Solution 4: Copy “mscms.dll” Manually

ane. Open up
C:\Windows\system32
andfind the file “mscms.dll“.

ii. Copy the file to the following path:

C:\windows\system32\spool\drivers\x64\3\ if yous are using 64-chip windows

C:\windows\system32\spool\drivers\w32x86\3\ if you are using 32-bit windows

If you lot have no idea which version of Windows you are using, see
How to Get Operating Arrangement Version.

iii. Effort to connect to the printer again.

Solution 5: Delete a Subkey

Modifying registry keys incorrectly may crusade serious system issues. So before you go started, it is recommended that you
support the registry key
so you can restore it in example any problems occurs.

1. StopPrint Spooler
service. (refer steps in Solution 1 to stop the service)

two. Press
Win + R
(Windows logo key and R key) at the same fourth dimension. A Run dialog box volition open.

3. Typeregedit
in the run box and click
OK
button.

four. AggrandizeHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Impress Provider. Correct-click onClient Side Rendering Print Provider
and select
Delete.

v. Start the Impress Spooler service.

six. Reboot your computer and endeavor to add the printer once again.

Read:  Cara Install Printer Epson L360 Dengan Cd

Hope the solutions here will assist you fix the printer not connecting issue.



76

76 people establish this helpful