Windows Cannot Connect to the Printer 0x00003eb

Windows Cannot Connect to the Printer 0x00003eb

Windows Cannot Connect to the Printer 0x00003eb

Fix Windows Cannot Connect to the Printer:If y’all are continued to a local network which shares a printer, it may be possible you lot may receive the error bulletin “Windows cannot connect to the printer. Operation failed with error 0x000000XX” while trying to add the shared printer to your computer using Add Printer feature. This result occurs considering, after the printer is installed, Windows 10 or Windows 7 incorrectly looks for the Mscms.dll file in a subfolder different than the windows\system32 subfolder.

Windows Cannot Connect to the Printer 0x00003eb

Now there is alreadya Microsoft hotfix for this effect but it doesn’t seem to work for many users. So without wasting any fourth dimension let’s see how to actually Gear up Windows Cannot Connect to the Printer on Windows 10 with the below-listed troubleshooting guide.

Note:
You could try the
Microsoft hotfix
offset, just in case if this piece of work for you then y’all will save a lot of time.

Windows Cannot Connect to the Printer [SOLVED]

Brand sure tocreate a restore point merely in example something goes wrong.


Method one: Re-create the mscms.dll

1.Navigate to the following folder:
C:\Windows\system32\

2.Detect the
mscms.dll
in the to a higher place directory and right-click so
select copy.

Right-click on mscms.dll and select Copy

iii.Now paste the above file in the following location according to your PC compages:

C:\windows\system32\spool\drivers\x64\iii\ (For 64-bit)

C:\windows\system32\spool\drivers\w32x86\3\ (For 32-bit)

4.Reboot your PC to save changes and again endeavour to connect to the remote printer over again.

This should aid youReady Windows Cannot Connect to the Printer issue,if not then go along.

Read:  Cara Print Kertas A3 Di Printer A4


Method 2: Create A New Local Port

i.Press Windows Cardinal + X so select
Control Console.

control panel

ii.Now click
Hardware and Audio
then click on
Devices and Printers.

Click Devices and Printers under Hardware and Sound

iii.Click
Add together a printer
from the top card.

Add a printer from devices and printers

4.If you don’t see you printer listed click the link which says “The printer that I want isn’t listed.

Click on The printer that I want isn't listed at the bottom

5.From the next screen select “Add a local printer or network printer with transmission settings” and click Next.

Check mark Add a local printer or network printer with manual settings and click Next

half-dozen.Select
Create a new port
and then from type of port drib-down select
Local Port
and so click Side by side.

Select Create a new port and then from type of port drop-down select Local Port and then click Next

7.Type the printer’due south accost in Printers port proper noun field in the following format:

\\IP accost or the Figurer Name\Printers Name

For example
\\192.168.1.120\HP LaserJet Pro M1136

Type the printer’s address in Printers port name field and click OK

viii.Now click OK and then click Next.

ix.Follow on-screen instructions to finish the process.


Method 3: Restart Print Spooler Service

1.Press Windows Fundamental + R so type
services.msc
and hit Enter.

services windows

2.Find
Print Spooler service

in the list and double-click on information technology.

3.Make sure the Startup blazon is set to
Automatic
and the service is running, then click on Cease and so once more click on start in order to
restart the service.

Make sure the Startup type is set to Automatic for print spooler

four.Click Apply followed by OK.

5.After that, again try to add together the printer and run across if the y’all’re able toReady Windows Cannot Connect to the Printer event.


Method 4: Delete Incompatible Printer Drivers

1.Press Windows cardinal + R so type
printmanagement.msc
and hit Enter.

ii.From the left pane, click
All Drivers.

From the left pane, click All Drivers and then right-click on the printer driver and select Delete

3.At present in the right window pane, right-click on the printer driver and
click Delete.

Read:  Reset Epson L110 L210 L300 L350 L355 Printer With Software

four.If you meet more than than one printer commuter names, repeat the above steps.

5.Again endeavour to add the printer
and install its drivers. See if you lot are able toFix Windows Cannot Connect to the Printer issue,if not then proceed with the side by side method.


Method 5: Registry Fix

1.Get-go, you demand to
stop Printer Spooler service
(Refer to method 3).

two.Press Windows Key + R and then type
regedit
and hit Enter to open Registry Editor.

Run command regedit

3.Navigate to the post-obit registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Customer Side Rendering Print Provider

4.Now right-click on
Client Side Rendering Print Provider
and select
Delete.

Right-click on Client Side Rendering Print Provider and select Delete

5.Now again get-go Printer Spooler service and reboot your PC to save changes.

Recommended for you:

That’s it you take successfully
Ready Windows Cannot Connect to the Printer issue
but if you still take whatever questions regarding this article then feel gratis to ask them in comment’s section.

Windows Cannot Connect to the Printer 0x00003eb

Check Also

Ampun Reset Kedap Kedip Pada Printer Epson L350

Ampun Reset Kedap Kedip Pada Printer Epson L350

Ampun Reset Kedap Kedip Pada Printer Epson L350 Seperti yang kita ketahui, penggunaan printer tentunya …