What Is the Latest Firmware for Samsung Note 5 at&t

The firmware can be a lifesaver sometimes. If your device gets bricked because of a bad installation of app or any mod, so you can use the firmware to go back to stock easily. It’s also helpful in removing the root and TWRP recovery from your device, and install the stock recovery back.

Some of you may be looking for a Note 5 Oreo firmware, just well, distressing to exist the bearer of bad news: Note five isn’t supported with Android 8.0 update by Samsung. Thus, you won’t see Oreo update for the Note 5, and thus no firmware either.

You take to install firmware meant for the exact model no. of your device, so check out that first earlier downloading the firmware. Check out the sections below to identify model no. of your handset, and a fashion to install the firmware given in the table below for various model no. of the Note 5.

Read:
Milky way Note 5 update news and changelog

Bank check the above link for latest news on Note 5 update, with their changelog. You might want to bank check out which update (and firmware) brings fixes of major security issues.

Samsung Galaxy Annotation five Firmware

Some of the Galaxy Note five models are equally follows based on the carrier or region.

• AT&T Milky way Note v: SM-N920A
• T-Mobile Galaxy Notation 5: SM-N920T
• Sprint Milky way Note 5: SM-N920P
• Verizon Galaxy Annotation 5: SM-N920V
• US Cellular Milky way Note five: SM-N920R4
• Canadian Galaxy Note 5: SM-N920W8
• Global Milky way Notation 5: SM-N920G/H/i/F/FD

AT&T Notation five firmware:

Here are some AT&T Note 5 firmwares, because they are not included in the table below. Find the firmware for others models and carriers in the tabular array below.

• Android 7.0 –
  N920AUCU4EQC6
• Android 6.0.1 –
  N920AUCS4CQB2
• Android 6.0 –
  N920AUCS4CPK1
• Android 6.0 –
  N920AUCS3CPJ1
• Android 6.0 –
  N920AUCS3BPH4
• Android five.1.1 –
  N920AUCU2APB2

How to download the correct firmware file

This is an important part!

Be sure to
check and
notice
the right model no. of your Galaxy Notation five. And then, based on your device’s model no., look for the advisable firmware build from in a higher place.

Yous can
place the model no.
using an app chosenDroid Info, or but bank check it on its packaging box, or nether Settings > About. Another solid trick would be to expect at the packaging box of your device (in example y’all can’t power on the device because information technology is bricked).

Now that y’all know the model no.,
download the latest firmware
from in a higher place for that model no. exactly.

Next, install the firmware on your Galaxy Note five by following the guide linked right below.

How to install a firmware

First, read our disclaimer, and then take backup and and then follow the guide below to install the firmware.

Disclaimer: Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to exist cautious of it. In any case, you merely are responsible for your device. We won’t be liable if any harm occurs to your device and/or its components.

Backup, fill-in, backup! Create an advisable

backup

of contacts, pictures, videos, songs and other important files stored on your device earlier proceeding with the steps below, and so that in case something goes incorrect you’ll have a backup of all your important files. Sometimes, firmware installation may delete everything on your device! Like, when you change the CSC of your device, knowingly or not.

Stride-past-step Firmware Installation Guide

Let’s see how to install the firmware on your Galaxy Note 5. Make certain y’all have more than 30% battery on your device.

Step i.
Make sure you have downloaded the correctfirmware file on your PC. See above for how to download correct firmware file for your Galaxy Notation five and download links.

Step 2.
Install

Samsung USB driver
 (method 1 on the linked page) first of all. Double-click the .exe file of drivers to brainstorm the installation. (Not required if you accept already done this.)

Step 3.Also,

download Odin

PC software (latest version).

Step 4. Excerpt
the firmware file at present. You can use a free software like 7-nil for this. Install 7-zippo, then right click on firmware file and under 7-zero, select ‘Extract here’. You should get a file in
.tar.md5
format now. (You may get four or more files, with AP, BL, CP or CSC etc. written at the beginning of those files.) We will be loading this file into Odin, to be installed on the device (in step 10 beneath).

Step 5. Extract
the
Odin
file. You should get the Odin exe file (other files could be hidden, hence not visible).

Step six. Disconnect
your Galaxy Note v from PC if it is connected.

Step 7.
Boot into
download style:

• Ability off your device. Expect for half dozen-7 seconds later screen goes off.
• Printing and hold the 3 buttons Book downwardly + Home + Power together until yous see the Warning screen.
• Press Book Upwards to proceed to download mode.

Step 8.
Double click on Odin
.exe
file (from step v) to open the
Odinwindow as shown below. Exist careful with Odin, and do just as said to prevent problems.

Step 9. Connect
your device now using the USB cablevision. Odin should
recognize
your device. It’s a must. When it recognizes, you will see
Added!! message appearing in the Log box in the bottom left, and the kickoff box under ID:COM will too show a no. and turn its groundwork blue. Await at the motion-picture show below.

• Yous cannot proceed until you go the Added!! message, which confirms that Odin hasrecognized
  your device.
• If you don’t become Added!! message, you demand to install/re-install
  drivers
  once again, and use the original cablevision that came with the device. More often than not, drivers are the trouble (look at stride 2 above).
• You tin can endeavor different USB ports on your PC besides.

Step 10. Load
the
firmware fileinto Odin. Click the
AP
push on Odin and the select the .tar.md5 file from higher up.

Load the firmware files(s) on your device. This depends on how many files you got in step 4 in a higher place upon extracting the firmware .zip file.

Example i

:
If yous got a
unmarried .tar/.tar.md5 file, then load this into AP tab of your Odin software. Then go to side by side step.

To load the file, click on AP tab, select the unmarried firmware file starting with AP text, expect for it to load, and so skip to stride 11, ignoring the rest of the part of this stride.

Case two:
If yous got
more than 1 .tar/.tar.md5 file, then you must be having files starting with AP, CSC, Home_CSC, BL, CP, etc. stuff. In this case, cull the files equally follows. Select the firmware files as follows.

• Click on BL tab, and select the file beginning with BL text.
• Click on AP tab, and select the file beginning with AP text.
• Click on CP tab, and select the file outset with CP text.
• [Dissimilar] Click on CSC tab, and select the file offset with HOME_CSC text. If HOME_CSC file isn’t available, then select the file beginning with CSC text.

Nearly CSC file: Using the HOME_CSC file won’t reset your device, and information on the phone shouldn’t be deleted. However, when nosotros select regular CSC file, and it results in CSC on the device being different than that in CSC file, your phone will be formatted automatically. You can even choose to ignore loading the CSC file, that may practise alright too. Only if it doesn’t piece of work out, repeat the whole process and select CSC file this fourth dimension effectually.

• Info:
  When y’all load files, Odin checks the md5 of firmware file, which takes fourth dimension. Then, just await until that’southward done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size volition likewise prove upwards in Odin.

Step eleven.
Click on Options tab, and make certain
Re-division
checkbox is
Non selected. Don’t utilise PIT tab, e’er.

Get dorsum to
Log tab
at present, equally information technology volition show the progress of firmware installation when yous hitting the start button in side by side footstep.

Step 12.
Verify that everything is okay as mentioned above. When satisfied, click the
Beginning
button on Odin now to starting time flashing the firmware on your device.

Wait till installation is finished, after which your device will reboot automatically. Yous’ll becomePASSmessage every bit shown below upon successful installation from Odin.

Some errors y’all may encounter, and with respective solution.

• If Odin gets stuck at
  setup connection, and so you need to do this all again. Disconnect your device, shut Odin, boot device into download way again, open up Odin, and and then select the file and flash it again as said above.
• If you go
  Fail
  in the peak left box, then besides you need to flash the file again as stated just higher up.

That’s it. Let the device restart automatically.

The outset beginning of the device may take fourth dimension, so wait patiently again. When it has, verify the installation.Bank check
the Settings > About device, to ostend new build no. based on the firmware you but installed.

Need help? Exist sure to allow usa know via comments below.

Firmware Benefits

You can use the firmware for a variety of purposes, which includes:

• Fix
  your Galaxy Note 5 if information technology’s giving y’all force closes errors and restarts randomly.
• Unbrick
  your Galaxy Note v if it’s bootlooping and stuck at logo when restarting.
• Get
  Back to Stock on your Milky way Note 5 — helps when looking to sell the device, or ready installing OTA updates if cleaved.
• Restore
  Galaxy Note 5 to factory state.
• Upgrade
  your Milky way Note 5 to newer Android version.
• Downgrade
  your Galaxy Note 5 to lower build no. at same Android version.
• Unroot
  your Galaxy Note 5.
• Remove custom recovery
  similar TWRP and CWM, if installed, on your Galaxy Notation 5.

To perform whatever of the above, simply install the firmware meant for your device, as per its Galaxy Note five firmware in Settings > Almost device.