Uploaded Configuration File Is Not Compatible With Current Firmware Version
Managing Software Upgrades
The Firmware folio provides an overview of the latest firmware version supported on the device, details of the device, and the selection to set compliance and upgrade the device.
Changing
AOS-South
switches firmware from latest version to earlier major versions is not recommended if the switches are managed in UI groups. For features that are non supported or non managed in Aruba Central on earlier
AOS-S
versions, changing firmware to earlier major versions might result in loss of configuration.
Viewing Firmware Details
To view the firmware details for devices provisioned in
Aruba Central, perform the following steps:
- In the
Aruba Cardinal
app, select i of the following options:- To select a group in the filter, prepare the filter to 1 of the options under
. For all devices, set the filter to
. The dashboard context for the selected filter is displayed. - To select a device in the filter:
- Set the filter to
. - Under
, click
, so click
,
, or
. A list of devices is displayed. - Click a device listed under
. The dashboard context for the device is displayed.
- Set the filter to
- To select a group in the filter, prepare the filter to 1 of the options under
- Under
, click
.The following animation bear witness the firmware dashboard options for switches.
Firmware Maintenance Window
The following are the data pane items and description:
- —Displays the post-obit information:
-
—Displays the following details about
Aruba
switches managed through
Aruba Central: -
—Displays the following details about the
SD-WANSoftware-Defined Wide Area Network. SD-WAN is an application for applying SDN engineering science to WAN connections that connect enterprise networks across disparate geographical locations.
Gateways managed through
Aruba Fundamental
in
mode: -
—Allows you to set firmware compliance for devices within a grouping. Click
and turn on the toggle switch to enable and view the listing of supported firmware versions for each device in a group in the
page.-
—To ensure firmware version compliance, complete the post-obit parameters in the
folio:-
—Select a specific group or multiple groups for which the compliance must exist set. Select
if you lot desire to set compliance for all the groups. - —Select the firmware version number from the drop-down list to which the compliance is required to exist set.
-
—Select i of the post-obit radio buttons to specify if the compliance must be carried out immediately or at a later date and time.
- —Select this if y’all want the compliance to be carried out immediately.
- —Select this if you want the compliance to be carried out in a specific time zone at the subsequently appointment and fourth dimension.
- Click
button to save the firmware compliance with the above settings. To articulate the compliance, turn off the toggle switch.
-
—Select a specific group or multiple groups for which the compliance must exist set. Select
-
—To ensure firmware version compliance, complete the post-obit parameters in the
page:- —Select the group for which the compliance must be set. Select the specific group to set compliance at group level.
- —Select the AOS-S firmware version number from the drop-down list to which the compliance is required to be set up.
-
—Select the
Aruba
CX switch version number from the drop-down listing to which the compliance is required to be gear up. -
—Select one of the following radio buttons to specify if the compliance must be carried out immediately or at a later appointment and time:
- —Select this if you want the compliance to be carried out immediately.
- —Select this if you want the compliance to be carried out in a specific time zone at the later date and time.
- —Employ the drop-downward to select a primary partition or a secondary segmentation to install on.
-
—Select this cheque box to reboot
Aruba Key
automatically after the build is downloaded on the device. On reboot, the new build is installed on the device. - Click
button to save the firmware compliance with the in a higher place settings. To clear the compliance, plow off the toggle switch.
Aruba Fundamental
lists all available
Aruba
CX switches software versions. Select the software version that is applicable to the
Aruba
CX switch to which compliance is required to be fix. For example, version
x.04.0020
is non applicable to
Aruba
CX 6200 and 6400 switch serial. -
—To ensure firmware version compliance, complete the following parameters in the
folio:-
—Select a specific grouping or multiple groups for which the compliance must be set. Select
if you want to set up compliance for all the groups. - —Select the firmware version number from the drop-downwardly list to which the compliance is required to be fix.
-
—Select i of the post-obit radio buttons to specify if the compliance must exist carried out immediately or at a afterwards date and fourth dimension:
- —Select this if you want the compliance to be carried out immediately.
- —Select this if yous want the compliance to be carried out in a specific time zone at the later date and time.
- —Utilise the drop-down to select a master partition or a secondary partition to install on.
-
—Select this check box to reboot
Aruba Fundamental
automatically after the build is downloaded on the device. On reboot, the new build is installed on the device. - Click
button to salvage the firmware compliance with the in a higher place settings. To clear the compliance, turn off the toggle switch.
-
—Select a specific grouping or multiple groups for which the compliance must be set. Select
-
-
—Allows you lot to simultaneously upgrade firmware for all devices. Click
to view a list of supported firmware versions for each device.-
—Click
and consummate the following parameters in the
page:- —Select a specific site or multiple sites for which the upgrade must be set. Y’all tin can as well search for the site in the search filter.
-
—Select the firmware version number from the driblet-down list to which the compliance is required to be set. Select
for none of the firmware versions. -
—Select one of the post-obit radio buttons to specify if the upgrade must be carried out immediately or at a afterward date and time:- —Select this if y’all want the compliance to be carried out immediately.
- —Select this if y’all want the compliance to exist carried out in a specific time zone at the subsequently date and time.
- —Click this push button to get-go the upgrade with the above settings.
- —Click this button to schedule the upgrade with the above settings.
-
—Click this push button to cancel the upgrade.
While upgrading a large number of APs, abolish operation may non piece of work as intended, and continues to upgrade.
-
—Click
and consummate the following parameters in the
page:- —Select a specific site or multiple sites for which the upgrade must exist set. You can also search for the site in the search filter.
- —Select the AOS-Due south firmware version number from the drop-downwardly list to which the compliance is required to be set.
- —Select the CX switch firmware version number from the drop-down list to which the compliance is required to exist set up.
-
—Select one of the post-obit radio buttons to specify if the upgrade must be carried out immediately or at a later date and fourth dimension:
- —Select this if you want the compliance to exist carried out immediately.
- —Select this if you want the compliance to exist carried out in a specific time zone at the afterwards date and time.
-
—Utilise the drop-downwards to select a primary partition or a secondary sectionalisation to install on.
-
—Select this check box to reboot
Aruba Key
automatically after the build is downloaded on the device. On reboot, the new build is installed on the device. -
—Click this push to kickoff the upgrade with the to a higher place settings.
- —Click this push button to schedule the upgrade with the above settings.
- —Click this button to cancel the upgrade.
-
—click
and consummate the following parameters in the
page:- —Select a specific site or multiple sites for which the upgrade must exist set up. You lot can also search for the site in the search filter.
- —Select the firmware version number from the drib-downward list to which the compliance is required to be set up.
-
—Select one of the following radio buttons to specify if the upgrade must exist carried out immediately or at a later appointment and time.
- —Select this if y’all desire the compliance to be carried out immediately.
- —Select this if you lot want the compliance to be carried out in a specific time zone at the afterward date and time.
- —Use the driblet-down to select a principal sectionalisation or a secondary partition to install on.
-
—Select this check box to reboot
Aruba Central
automatically after the build is downloaded on the device. On reboot, the new build is installed on the device. - —Click this button to start the upgrade with the above settings.
- —Click this push button to schedule the upgrade with the higher up settings.
- —Click this button to cancel the upgrade.
-
—Click
-
—Allows you lot to define a filter benchmark for searching devices based on the post-obit backdrop:
- Common to all devices—Name, Firmware Version, Recommended Version and Upgrade Status of the device.
- Specific to switches and gateways—MAC address and Model.
-
—Clicking
icon enables you to customize the table columns or set it to the default view. - —Allows you lot to continue with firmware upgrade.
- —Cancels a scheduled upgrade.
- —Cancels a scheduled upgrade for all devices.
This section as well includes the post-obit topics:
