Update Phantom 3 Standard Remote Controller Firmware

Update Phantom 3 Standard Remote Controller Firmware

  • HanJin

Firmware is an important update from many points of view. Many drone owners don’t know how to update the firmware on their Phantom 3. This commodity will teach you
How To Update DJI Phantom 3 Firmware

. This is something you volition need to do often so information technology’s important that you lot are familiar with the process.

Install The Firmware On Your Phantom

Install The Firmware On Your Phantom

When updating a Phantom 3 Professional it is a good idea for a fan to be pointed at the gimbal during idle time. When the Phantom is left idle for also long, the gimbal can overheat and go damaged.

  1.  Brand sure your Phantom battery has at least 50% charge. When you press the power switch, at least two lights should be visible. You can stop correct here to accuse your battery up to 50%.
  2.  Turn off both the remote controller and your Phantom.
  3.  Take out the props and remove the gimbal.
  4.  Insert your memory card in the retentivity slot on the camera.
  5. Install the Phantom bombardment in your Phantom and turn it on. For power on the battery press and release quickly the push button – then press and agree the button in place for 2 seconds.
  6. To monitor the installation process, you can employ the status low-cal. It should practise the following.
  • Wink green when your Phantom is getting started.
  • While the firmware update procedure is underway, alternate between green and cherry-red.
  • When the firmware update is complete, your computer will plow solid light-green. A D-DD beeping sound will also be heard.

Please note: Lights under the Phantom arms may flash in different colors or get off. The Phantom may beep in different patterns, even a single tone. You might see the camera move or rotate. Y’all can ignore all these issues and expect for the condition calorie-free (or red if it fails) to change from solid green to solid red. This could take as long as twenty minutes.

     7. Turn off your Phantom’s battery when the camera state low-cal turns to solid light-green. Y’all can power down your battery by pressing and releasing the power buttons quickly. Then, immediately hold the button for 2 seconds.

    8. To confirm that the firmware was successfully installed, open the TXT files that were created on your memory stick and make sure that the end line includes success.

    nine.  Delete your TXT file on your memory card.

Why Should I Upgrade My Firmware?

Why Should I Upgrade My Firmware?

Firmware is basically software that runs a specific device. Nearly all devices have firmware. This includes modems, calculators, smartphones, and other smart devices. The firmware controls the interaction of all the electronics in the drone and controller, so information technology’s non surprising that drones are complex. If your Phantom is running fine, why bother upgrading the firmware?

  • Enjoy new features from DJI.
  • Repair bugs found in the current firmware
  • Back up for third-party accessories and the most recent apps.

Nosotros recommend that you update the firmware of your Phantom every bit shortly as possible after DJI releases it. It’south possible that an consequence has been introduced in the old firmware. It’south not ideal for something to prevent your aircraft from having issues in the future. Therefore, it is e’er a good idea to update the firmware as soon every bit possible.

Where Can I Discover The Most Recent Phantom 3 Firmware Updates?

Where Can I Find The Most Recent Phantom 3 Firmware Updates?

You can always find the latest software for any DJI product on their official website. These links apply to
Phantom 3. Beneath each P3 model, we have listed the most electric current firmware as of the writing.

Read:  Firmware Refused to Boot From the Selected Volume

The almost recent firmware update volition be labeled “Firmware version XYZZ”. These numbers will indicate the most recent firmware. You tin can proceed up-to-date with the latest firmware releases by using your DJI app or DJI newsroom.

How Can I Verify The Latest Firmware Version Of My Phantom?

This is a simple task, specially since DJI GO volition notify yous when upgrades are needed.

  • Turn on the airplane and the controller
  • Connect your smartphone or tablet to your Phantom
  • Install the DJI Get App.
  • Enter Camera view.
  • Tap the settings icon in the upper-correct corner of your screen. It is indicated by three horizontal lines.
  • Scroll down to the bottom of all the options and click on ‘Almost. The current firmware version of your remote and aircraft will exist displayed.

What Should I Do Before Updating Firmware?

What Should I Do Before Updating Firmware?

Both the remote command and shipping battery must be fully charged. You should have these items on manus:

  • You can find the latest DJI Get version on the Google Play Store or App Shop for Apple devices.
  • A microSD bill of fare fast with at least 100mb free space (let’southward increase it to 200mb for safety)
  • Stable internet connectivity
  • It takes about an hr to consummate the firmware update

How To Update DJI Phantom 3 Firmware

All Phantom 3 models (Pro-, Advanced, Standard, and 4K) are almost identical. The video beneath will evidence y’all how to upgrade the firmware. You lot can besides come across our guide step-by-footstep with text instructions if you prefer.

Using the DJI Get App (Compatible with Phantom 3 Standard and Phantom 4K).

  • Turn on the Remote Controller and the Shipping.
  • As normal, connect to the Wi-Fi network of your Aircraft.
  • You can launch the DJI Get app with your tablet or phone just like yous would ordinarily.
  • Tap the prompt at top of the screen to receive a notification that a new firmware update is available.
  • Connect your mobile device now to your office or domicile wifi to connect to the Net.
  • Return to DJI Go and click the “Download Now” button at the bottom.
  • A progress bar will appear, which will display the progress of your download.
  • Later on the file has been downloaded, you will need to alter the wifi networks again. To do this, go to the settings screen of your phone or tablet. Change your wifi connection to the controller’south network from your office or dwelling house network.
  • Now you can re-open up DJI Get and click on the “Start Upgrade” button.
  • You will again see a progress bar to indicate how the firmware update progresses. During this time, please don’t shut downwards your shipping or mobile device.
  • After the upgrade is completed, click on the “Consummate” button in the DJI Go app and so restart your shipping. The new firmware will be installed.

Use A Computer (Compatible With All Phantom three Ranges)

  1. Go to the appropriate DJI downloads folio to catch the latest firmware: Phantom3 Professional Phantom3 Avant-garde Phantom3 Standard Phantom3 4K
  2. Save the null file to a folder on your desktop. The firmware is contained in the.bin file.
  3. Your Micro SD card tin be inserted into the slot in the Phantom 3’s Gimbal.
  4. Utilise the USB cable provided with your Phantom to connect your computer to the Micro-USB port. You can also remove the SD card from your Phantom and then insert it into your computer with a card reader.
  5. Every bit normal, turn on your
    Phantom iii
    drone.
  6. Copy the.bin file that you just unzipped to your desktop and identify it at the root of your SD card. It should now be listed every bit a storage device on the computer. The root is the SD card’s home location, and not any subfolders or folders.
  7. In one case the file is copied, disconnect the USB cable connecting the aircraft to your reckoner. You can as well remove the SD card from your computer and put it dorsum into the aircraft.
  8. Now, the aircraft volition automatically upgrade its firmware using the.bin file you have placed on the SD Card. The process tin take up to 40 minutes so don’t be alarmed that it takes so long. The device might brand strange sounds or reboot during the update process. This is normal and expected.
  9. After the update is complete, you volition see a small LED on the gimbal.
  • Flashing green and red means that Firmware is still being upgraded.
  • Solid green low-cal – The firmware update is complete.
  • Solid red – The firmware update was unsuccessful.
Read:  H96 Pro Plus Firmware Upgrade to Android 7.1

10. The firmware upgrade is consummate when the status LED on your Phantom 3 gimbal turns solid green and does not wink,

eleven. You should likewise pay attention to the sounds your gimbal makes. A beep every half second means that the updated file is being recognized and loaded. Four beeps per row indicate that the file is in progress. Finally, one short beep indicates that the update is complete.

This completes the firmware upgrade. Before you lot can continue using your aircraft, delight delete the bin file.

How Do I Update The Firmware Of The Phantom 3 Controller

How Do I Update The Firmware Of The Phantom 3 Controller

Yous will need to update the firmware of your Phantom three Professional or Advanced quadcopter when it is necessary. Please ensure that you have the following information before updating the firmware on your Phantom’s remote controller:

  • Upgrading the DJI GO app from the Google Play Store to the latest version is recommended.
  • Make sure your remote control is fully charged
  • Make certain that the Aircraft is switched off
  • Y’all tin can connect your tablet or telephone to the internet via the remote.
  • To download the firmware package via DJI Become, ensure you have at least 50MB free space on your smartphone or tablet.

The process of updating the controller’due south firmware is fabricated much simpler past the DJI Get app:

  1. Use the provided USB cablevision to connect your Phantom 3 remote control to your smartphone or tablet.
  2. Every bit normal, turn on the remote.
  3. Open the DJI GO App on your tablet or phone.
  4. Equally normal, enter the camera interface.
  5. Tap the “Flight Condition” bar in your app (the large colored block at superlative of the screen).
  6. Tap on the “Overall Status” option. A message should announced saying “Upgrade Required”.
  7. Tap the “Download Firmware” option in the app.
  8. Once the firmware is downloaded, click on the “Start to Upgrade” choice at the bottom.
  9. To betoken that firmware upgrades have begun, the remote controller volition emit a alarm audio and the LED on the bottom left volition blink blue.
  10. The DJI Become app volition display a progress bar in real-time that shows how far you are from the completion of your update.
  11. The firmware upgrade is consummate when the progress bar reaches a full pinnacle and the LED on your remote controller changes to solid light-green.
Read:  Pc Has Unsupported Disk Layout for Uefi Firmware

Update of Battery Firmware

You should update each quadcopter’s firmware if you have multiple batteries. After the update has been completed, you will need to modify the Phantom iii’south battery. The Phantom software volition non be updated, but the smart batteries will. This process tin can be repeated with every bombardment.

Here Are Some Useful Tips For Updating Phantom 3 Firmware

Here are some useful tips for updating Phantom 3 Firmware

  • Yous should only have one firmware pack on your MicroSD card. Before y’all begin the process, verify that it is truthful.
  • Ensure that your drone’s file organization and controller support media files with ExFAT or FAT32 file systems during an upgrade
  • To avoid any problems with the downloading process, your internet connection must exist stable.
  • Before you begin the firmware update, make sure y’all enable “Plane Mode” on your phone to ensure that you are not interrupted past incoming calls during the process.
  • If the drone is nevertheless flying, it’s non a good idea to run updates. This operation should be performed but on the ground, in compliance with all safety regulations.
  • After the update, you will demand to synchronize your device.

To flash the controller, insert a Micro SD bulldoze with the firmware in your
Phantom 3. Connect the remote to the drone using a USB cable. The firmware will automatically get-go.

FAQs

How To Update FAQS- DJI Phantom 3 Firmware

Do I Demand To Update The Software For DJI Phantom iii Standard Standard?

Notice: All firmware updates for Phantom 3 Standard and Phantom 3 4K must be downloaded from the DJI GO app. When firmware updates become available, you’ll be prompted by the DJI Go app.

How Tin can I Verify My Phantom 3 Firmware Version?

PHANTOM three Professional and Advanced remote controller firmware versions are v1. To update your firmware to version three.20 or college, you volition need the DJI Become App. Launch the DJI Go app and navigate to Photographic camera View > Arrangement Status Bar > Overall State.

How Do I Update My DJI Firmware?

Open the DJI Go iv App from your smartphone or tablet. The “Upgrade Now” button is located in the pinnacle-right corner of the screen. Information technology’s highlighted in red. Click the blue-push “Download Now” to kickoff downloading the latest firmware from DJI.

Conclusion

Every DJI drone must be updated on a regular basis. In this post, nosotros go over the methods and crucial pre-steps for updating the firmware. Firmware is the software that controls all of the drone’s functions and capabilities. The command software communicates with all nodes and systems on the drone, rendering flight incommunicable. The flight would be incommunicable without firmware. The availability of the most recent firmware version is critical to flight safety. Each update contains fixes for discovered flaws and weaknesses that might take disastrous repercussions.

Please share this mail if you found it helpful and then that others might run across its contents equally well! Cheers for reading!

Update Phantom 3 Standard Remote Controller Firmware

You May Also Like