Update Firmware on Trek Wireless Outdoor Speaker
Applicable Model
This information is for the following models:
- SRS-XB23
- SRS-XB33
- SRS-XB43
Near this download
Benefits and improvements
- Improves the connection compatibility with
Political party Connect
compatible devices
Previous Benefits and Improvements
View previous benefits and improvements
Organization Requirements
- An Android device (V5.0 or later) or an iOS device (iOS xi.0 or later)
- An active Internet connectedness
- The latest version of the
Sony | Music Center
application must exist installed - The speakers must be connected to your Android or iOS device
File Info
File Name
- Firmware update to 4800 for SRS-XB23/SRS-XB33/SRS-XB43
File Version
- 4800
File Size
- SRS-XB23: 1.49 MB (ane 568 736 bytes)
- SRS-XB33: 1.53 MB (i 610 336 bytes)
- SRS-XB43: 1.53 MB (1 611 776 bytes)
Release Date
- 21-06-2022
Preparation
Cheque the firmware version
If the version is displayed lower than
4800, nosotros strongly recommend updating the firmware. If you lot’re not sure, it’s piece of cake to check which version of the firmware y’all currently take:
- Turn on the speaker.
- Launch the
Sony | Music Center
application. - Connect your speaker to the
Sony | Music Center
application. - Select
Settings.
- Select
System.
- Confirm the firmware version (numbers in red box).
Of import Notice
- DO NOT perform the update in a location where the Wi-Fi indicate is inconsistent, such equally:
- on a train or in a place where Wi-Fi signals go congested
- near a microwave, cordless phone, or whatever other devices that use the 2.4 GHz band frequency radio waves
- Make certain both devices (Android or iOS device and speakers) are fully charged.
- Make sure that your unit is connected to a power outlet via the USB AC adapter (SRS-XB23/SRS-XB33) or Air conditioning adapter (SRS-XB43) before starting the update.
- Disconnect all other Bluetooth devices such equally wearable devices or smart watches from your Android or iOS device before starting the update.
Before you upgrade
- Once updated, the firmware cannot be reverted to an earlier version.
- For Android devices, the update process volition take approximately 3 minutes to complete.
The file size is well-nigh ane.49 MB for SRS-XB23 and approx. 1.53 MB for SRS-XB33/SRS-XB43.
For iOS devices, the update procedure will take approximately x minutes to complete.
The file size is near 1.49 MB for SRS-XB23 and approx. 1.53 MB for SRS-XB33/SRS-XB43. - Depending on the radio wave surroundings and your Android or iOS device, it may take longer to complete.
- To update these speakers, follow the procedure below.
- Download information from the server to the iOS device or the Android device.
- Transfer data from the iOS device or the Android device to the speakers.
- Execute the update with the speakers.
Download & Install
To update these speakers, follow the procedure beneath:
- Download data from the server to the iOS device or the Android device.
- Transfer data from the iOS device or the Android device to the speakers.
- Execute the update with the speakers.
Step ane: Install the update
- Connect to a power supply outlet.
- SRS-XB23/SRS-XB33
Utilise the USB Air-conditioning adapter and supplied USB Type-C cable to connect the unit’due south DC IN 5 V port to a power outlet. - SRS-XB43
Connect the supplied AC adapter to the speaker’s DC IN five V port and an AC outlet.
Note:
The software update cannot be performed when using battery power only.
- SRS-XB23/SRS-XB33
- Plow on the speaker.
- Launch the
Sony | Music Center
application. - Connect your speaker to the
Sony | Music Middle
application. - The following screen will be shown when the connectedness has been established.
- If an update is applicable,
Update the software of the speaker.
volition be displayed and you can printing
More Info.
- Verify that
Version 4800
is displayed and press
OK
to start the update.
- Once the download starts, information technology will automatically motion to the next screen after the download is completed.
- Once the transfer starts, it volition automatically motion to the next screen after the transfer has been completed.
Note:
Practice not turn off your speakers while downloading updates, transferring data, or updating, otherwise, the speakers may become unusable. When the software update is completed, press
OK.
- If the screen is not displayed, check whether the version has been upgraded in the post-obit pace.
- The speaker automatically turns off when the software update ends.
Footstep 2: Check the update was successful
After the update, confirm that the new version has been installed successfully by following the
Check the firmware version
section steps.
If the firmware version shown is
4800, the upgrade was successful.
Questions & Answers
An update fault bulletin appears.
- Press
OK. - Restart (turn the ability off then on) the speaker.
- After that, restart
Sony | Music Centre
and update again
Even though the update failed during the process, cheque the firmware version. If the Version is shown as
4800, the firmware update was successful. If not, try the firmware update again. You lot can check the Version from the setting in the
Sony | Music Center
application. To find out how to check the version, go to the
Check the firmware version
on this page.
Firmware Update to Version 4800
Improves the connection compatibility with Political party Connect uniform devices