Unable to Create Printer Port for Epson Error Code 1608
The ‘An mistake occurred during port configuration‘ occurs when the Printer port is either in apply or the Printer Driver installed is corrupt, or outdated.
What’s causing the port configuration error?
-
Glitched printer menu
– As it turns out, this detail issue might occur due to a common glitch that is interfering with the port configuration of wireless connected printers on Windows ten. In this case, y’all can resolve the issue by configuring the port via the classic Control Console menu. -
The printer is stuck in a limbo country
– Some other potential scenario that will cause this issue is a printer that’southward currently stuck in a limbo state (operating system isn’t aware that information technology’s turned on). If this scenario is applicative, y’all can get the issue fixed by performing a hard reset on your printer. -
3rd party firewall interference
– As it turns out, another potential scenario in which you might be prevented from accessing the Port Configuration menu is if an overprotective 3rd party firewall prevents information technology. In this case, y’all can eliminate the interference past uninstalling the firewall that’s causing the problem.
Method 1: Configuring the port via Device & Printers screen
While this is more of a workaround than an bodily fix, information technology has helped a lot of users to avoid the ‘An mistake occurred during port configuration’
altogether. Simply keep in heed that the steps below will but work if y’all come across the error while trying to configure your printer ports.
Note:
If you encounter the upshot while trying to print a file, move directly to
Method ii.
As it turns out, if you circumvent the result past trying to configure the
printer ports
from the classic Control Console interface, chances are you will not run across the same mistake bulletin.
Here’s a quick guide on how to practice this:
- Press
Windows key + R
to open upwardly
Run
dialogue box. Next, inside the window, type
‘control.exe’
and printing
Enter
to open up upward the classic
Control Panel
interface. If you’re prompted by the
UAC (User Account Control), click
Yes
to grant authoritative privileges. - Once you’re inside the classic Control Panel interface, use the search role in the height-correct corner to search for
Devices & Printers. One time the results show up, click on
Device & Printers. - Once you’re inside the
Device & Printers
carte, correct-click on the printer that yous’re having issues with and choose
Printer Properties
from the newly appeared card. - Once you’re within the
Backdrop
screen of your printer, select the
Ports
tab from the menu at the top. Next, select your printer from the list of ports and click on
Configure Port… - See if you lot are able to see the next menu without encountering the
An error occurred during port configuration’.
If the issue is persisting, motility downward to the adjacent method below.
Method 2: Doing a printer hard reset
If you’re encountering this issue while trying to use your
printer driver, chances are you lot will be able to resolve the event swiftly by doing a difficult reset procedure on your printer.
This might not be the most focused approach, but it’s a catholicon that a lot of users take successfully used to ready port configuration bug that ended up throwing the ‘An error occurred during port configuration‘ mistake.
Here’s a quick guide on doing a difficult reset on your printer:
- Turn your printer on (if it’s non already on) and await until information technology enters idle fashion (it completes the startup process).
- With the printer fully turned on, physically disconnect the power cord from the rear of the printer.
- Unplug the power cord from the wall outlet and wait at least threescore seconds.
- Afterwards that time period has passed, plug the power string dorsum into the wall outlet and reconnect the ability cord to the rear of your printer port.
- Plow on your printer again and wait until it enters idle fashion again.
Notation: Await until the printer finishes the initial warm-upwards flow. With virtually manufacturers, the lights will continue flashing until this operation is complete. - Repeat the operation that was previously causing the ‘An error occurred during port configuration‘ error and see if the effect is now resolved.
If the same upshot is even so occurring, move downwards to the next method below.
Method 3: Disable 3rd party firewall interference (if applicative)
According to diverse users that also encountered this problem, an overprotective firewall tin also be responsible for the bogeyman of this particular error.
As it turns out, certain AV suite (particularly firewall modules) will not trust external devices and so they will prevent new connections from being established. This is typically reported to occur with printers that are non fully compatible with Windows 10. Several Windows x users that encountered this trouble have confirmed that they were able to fix the trouble past uninstalling the third party firewall component that is causing the problem.
If you’re currently using a tertiary party firewall and you suspect that this might be causing this problem, follow the steps on this article (
here
) to uninstall information technology completely and ensure that yous’re not leaving behind any leftover files that will still cause this behaviour.
After you uninstall the restart your computer and repeat the activity at the adjacent computer startup to see if the outcome is nevertheless occurring.
If y’all’re nevertheless seeing the ‘An error occurred during port configuration‘ mistake or this method wasn’t applicable to your scenario, move downwards to the next potential fix below.