Troubleshooting and Routine Maintenance Brother Printer Dcp J140w

Troubleshooting and Routine Maintenance Brother Printer Dcp J140w


The bulletin “Unable to Print 4F” will appear on the brandish for ane of the following reasons:


     i.  A foreign object, such as a newspaper clip or ripped piece of paper, is stuck in the machine;


     ii.  Mechanical malfunction.


To attempt to clear the fault, go on to
step 1.



1.  Using both hands, use the finger holds on each side of the auto to life the scanner cover into the open up position.



Open Scanner Cover


     – Do y’all see the scanner comprehend support arm located on the left side of the automobile?


          – If
aye, go to
step 2.


          – If
no, verify you have opened the scanner encompass (as in the image above).  If the document embrace was opened, you lot won’t see the scanner cover support arm.  Close the certificate cover and get back tofootstep 1
to open the scanner cover.



two.  Advisedly check the left (2) and right (3) hand corners and the center inside the automobile and remove any newspaper scraps that may exist jammed.



Checking for paper scraps


3.  Using your hand, move the impress caput from left to right, checking carefully for any paper scraps stuck under the print caput.  Remove any if constitute.



note icon
If the print head is in the right-mitt corner, press and hold down the
Red X
 for at least 5 seconds until the print head moves to the middle.  This volition allow you to check the right corner within the machine for any paper scraps.


4.  Leave the scanner cover
open
and turn the machine around so y’all are looking at the back of the auto.

Read:  Aplikasi Printer Hp Deskjet 2130 Tidak Bisa Dibuka



5.  Open the Jam Clear Cover (one) on the back of the car.




Open Jam Clear Cover



half-dozen.  Bank check inside for whatsoever foreign objects or jammed paper.  Remove information technology found.


7.  Shut the Jam Clear Cover, then plow the car back around to the front.


eight.  Lift the apartment-bed scanner cover to release the lock (1), then gently push the scanner cover support down (2) and close the scanner encompass (3) using both hands.



Close Scanner Cover


     – If “Unable to Print 4F” however on the display, become to
pace x.


     – If “Unable to Print 4F” has cleared, go to
pace 11.



10.  Unplug the car from the power outlet for approximately one-minute, and so plug it back in.


     – If “Unable to Print 4F” still on the display, go to
step 12.


     – If “Unable to Impress 4F” has cleared, go to
stride 11.



11.  Print a Impress Quality Bank check Sail (PQCS).


     a.  Press
Ink Icon on the Touchscreen.


     b.  Press
Examination Print.


     c.  Press
Print Quality.


     d.  Press
OK.  A PQCS will print.


          – If the PQCS print successfully, your machine is working properly.  The issue has been resolved.


          – If the PQCS doesn’t print considering “Unable to Impress 4F” reappears
and
you have
not
cycled the power, go back to
stride 10.


          – If the PQCS doesn’t print because “Unable to Print 4F” reappears
and
yous
have
cycled the power, continue to
step 12.



12.
Your machine will require service.  Whatsoever faxes received while the error message is on the display will automatically go into the machine’due south memory due to the product’s inability to print.  If there are faxes in memory, you tin can transfer them to some other fax auto so they are not lost.

Read:  Cara Memperbaiki Printer Canon G2000 Lampu Berkedip



     – If you don’t want to transfer faxes, get to
Warranty and Service Options.




     – If you desire to ostend and transfer received faxes in retentiveness, go to
pace 13.





13.  Transferring stored faxes to some other machine.





note icon
To transfer data from your fax machine to another fax automobile, yous must have already programmed the Station ID in your auto
prior
to getting the “Unable to Print 4F” error message.  If you did not already have your Station ID programmed into the motorcar before getting the error, you volition not be able to transfer faxes in memory.  Continue to
Warranty and Service Options
.





a.  Press
Red X to temporarily interrupt the error message.





     b.  Printing
Settings Key on the Touchscreen.





     c.  Press
All Settings.




     d.  Press ▲ or ▼ to display
Service
.  Press
Service
.



     east.  Printing
Information Transfer
.



     f.  Press
Fax Transfer
.



          – If “No Data” appears there are no faxes in memory to transfer.  Press
Home Key, then continue to
Warranty and Service Options.




          – If there
are
faxes in memory, the display will prompt to enter a fax number.  Enter the fax number including the one plus the surface area code, so go to
stride g


.




g.  PressBlackness Starting time.  The stored faxes will transfer to that number.  Continue to
Warranty and Service Options.






Warranty and Service Options
:



Your machine has a one-year limited exchange warranty.  Check the warranty status of your machine by clicking on the
Machine Warranty Computer.




If in warranty, contact

Blood brother Customer Support

or locate a

Brother Authorized Service Heart

to schedule product replacement or repair.

Read:  Cara Memperbaiki Printer Canon Ip2770 Yang Berkedip Kedip


If out of warranty, locate a

Brother Authorized Service Center
.  Repair fees might apply for out-of-warranty products.

Troubleshooting and Routine Maintenance Brother Printer Dcp J140w

You May Also Like