Tp Link Print Server Unable to Find Printer After Firmware Update

Tp Link Print Server Unable to Find Printer After Firmware Update

After you purchase a TP-Link print server and ready it up in your network, sometimes due to incorrect settings or something else, yous may find it not working properly, and so how to troubleshoot for varieties of situations?


i.



Firstly please make sure your printer is in the compatibility listing of the print server, y’all could discover the listing on the official website of the products:


TL-PS110U:


TL-PS110P:


TL-PS310U:


TL-WPS510U:


two.



Secondly, make sure the printer could piece of work properly when it’due south connected directly to your reckoner.

After you ostend the 2 steps above, delight install the print server as the Quick Installation Guide properly, brand sure the installation steps are correct as the document instructs.

Hither nosotros list the most common troubleshooting methods forTL-PS110U, TL-PS110P and TL-WPS510U:

A.

Brand certain you accept not installed any utility of the printer, especially the HP smart install. Sometimes the utility from printer manufacture would have some influence on the print server.

B.

Before you install the impress server, please shut down all the anti-virus software and firewall. If y’all get some bug that await like a communication block issue in your use, delight check if shutting off the security software could make any difference.

C.

If you take some delay, pause, gibberish in your printing, please check the “LPR Byte Counting Enabled” in your computer and uncheck the “Bidirectional Support” option

(Please refer to the FAQ:

671)

D.

If your printer keeps printing and the tasks in the queue could not be deleted, delight open the services of your computer and restart the Printer Spooler service:

Read:  What Is the Latest Firmware for 3ds Xl

(Click on your start menu-
à
 Typing “service” in the searching blank, you could detect the “Service” , click on it and y’all volition discover the post-obit window)

Tp Link Print Server Unable to Find Printer After Firmware Update

E.

When you take problems in press test pages, y’all could remove all other network devices, keep merely one PC and the print server to test, meanwhile employ the “Ping” command to observe the delay, unremarkably it’s network delay issue hither.

F.

Sometimes the Os will remind you that lp1 queue is used by other printer when yous add standard TCP/IP for the impress server, you could use lp2 instead:

(In the command panel of your figurer, right click on the printer then observe “Printer Properties”, in the new window y’all could detect port backdrop, open it and y’all will find the post-obit window)

G.

When you endeavour to print with some software and found no luck, just apply simplest text script like notepad to print, see what’s coming.

And hither are the most common troubleshooting methods forTL-PS310U:

A.

Whatever time when y’all want to print or fax or scan using the TL-PS310U, delight brand sure yous have successfully connect to it via MFP utility

B.

If the printer keeps on showing “Local Continued”, please check if other computer has connected to it and not release information technology even so

C.

Please make sure that all of your MFP and Storage Servers are correctly connected to your network. As well, certain anti-virus programs come with firewall functions that might prevent the MFP and Storage Server setup utility from accessing the network. Please make sure the MFP and Storage Server setup utility is not existence blocked by your anti-virus plan.

Read:  Surface Pro 3 Cannot Install Firmware Update

D.

When yous install the driver of your USB devices on your computer, sometimes it requires a reboot to have effect.

E.

You could select “Disconnect Printer when Idle” or “Disconnect Storage Device when Idle” to make the utility release connectedness automatically when it’due south idle for 30s, this value could not exist changed, you have to reconnect manually to utilise it once again.


Notes

:

If yous are using a HP printer which owns the “HP smart install” characteristic, please plough the “HP smart install” off on the printer:

Press “OK” on the command panel to enter set listing-
à
Select “Service” and press “OK” again-
à
Select “HP Smart Install” and press “OK”-
à
Turn it off

Our print server could not piece of work with the “HP smart install” feature, please make sure you have turned it off earlier utilise.

Is this faq useful?

Your feedback helps improve this site.

Tp Link Print Server Unable to Find Printer After Firmware Update

Check Also

How to Update Firmware on a Samsung Hd204ui

How to Update Firmware on a Samsung Hd204ui

How to Update Firmware on a Samsung Hd204ui #i What the heck…I just got a …