Steam Vr Wont Detect Controllers When Updating Firmware

Steam Vr Wont Detect Controllers When Updating Firmware

Virtual reality (VC) headsets
are all the rage these days. They offer a more immersive experience to the gaming world and the chance to movement around — if everything’s working properly. HTC’s latest Vive headsets, including
the impressive Cosmos
new Vive Pro 2, are more than stable than ever, but sometimes things can still become wrong.

From “headset not found” errors to pairing problems, we’ll encompass common HTC Vive bug users face. And then, nosotros’ll suggest possible fixes and provide footstep-by-step instructions on how to address the issues you might run into with your HTC Vive.

Issues presented with an fault code

(Fault 108) Headset not establish

In that location are a couple of ways this fault tin manifest, either as an error message (error 108) or blinking crimson light on the headset. This is usually the result of either a USB or a commuter issue.

Possible fixes:

  • Showtime and foremost, make sure the headset is plugged in correctly. If in doubt, remove everything and plug it back in again.
  • The ability, USB, and HDMI cables from the headset should be plugged into the right slots on the link box; from there, the link box’s USB and HDMI should be plugged into the PC, and the power cord plugged into a power outlet.
  • One time properly plugged in, the LED on the headset should exist light-green, indicating that it’s ready for use.
  • If everything is plugged in but the headset is not turning on, try a different outlet.

Once yous’ve done that, if the issue all the same persists, there are a number of other things to try:

Reboot the headset

Step i:
In SteamVR, right-click on the headset icon and select
Reboot Vive Headset.

Step 2:
Await for the reboot to complete.

Power bike the link box

Footstep one:
Shut down SteamVR.

Footstep 2:
Unplug the power and USB string from the PC side of the link box (meaning Not the orange side of the link box).

Pace 3:
After a few minutes, plug the power and USB cord back into the Link Box. If you see a notification in the taskbar that a driver is installing, expect for it to finish.

Step four:
Relaunch SteamVR. Keep in mind that you may demand to repeat this procedure more than one time in club for the error to stop appearing.

Restart your calculator

Step 1:
Quit SteamVR and reboot your reckoner.

Use a different USB port

Sometimes, plugging into USB 3.0 and 3.1 ports tin can cause errors. In that instance, try using a USB 2.0 port instead. If there is a USB port already in use and working — say, one that your keyboard or mouse is plugged into — try moving the Vive connection to it. If, later on trying all possible USB ports, you still exercise non take a connectedness, try resetting your USB devices using the following steps.

Step 1:
Unplug the link cables from your PC.

Stride two:
Navigate to
SteamVR > Settings > General, and make sure the
Developer Settings
box is checked.

Step 3:
Resetin the sidebar.

Stride 4:
Double-check to see if the link box’southward USB cable is unplugged from the PC. Click
Remove all SteamVR Devices
Yepwhen prompted.

Step 5:
Quit SteamVR, plug the link box back into your PC, and re-launch SteamVR.

If you’ve attempted every prepare detailed above, it may be that your USB chipset is causing the issue. Cheque with
Steam’southward back up page
for further caption of compatible USB chipsets.

Steam Vr Wont Detect Controllers When Updating Firmware
Chuong Nguyen/Digital Trends

(Fault 113) Path registry non writable

This is usually due to a lack of proper installation permissions. You’ll need to change your permissions in Windows.

Change permissions

Pace 1:
Navigate to the folder you want to modify permissions for.

Step 2:
Right-click it and select

Footstep 3:
Click on the

Step 4:
Check the names listed in the
Group of usernames
box. If the business relationship you lot’re using does not announced, click
and blazon the name of the user you wish to add together. Skip this stride if the username already shows up.

Step 5:
To change permissions, click the
cheque box in the
Permissions for User or Group
box. For the purposes of solving error 113 with the Vive, yous’ll want to let access.

(Mistake 200) Driver failed

This fault message indicates that the OpenVR driver failed. If yous added a file or folder to the SteamVR commuter directory, removing it should fix the problem. If non, y’all may not take the proper permission to write to the user directory.

Change permissions

Step 1:
Right-click in Windows Explorer and select the binder you lot wish to edit permissions for.

Step 2:

Step 3:
Click on the

Footstep four:
Check the names listed in the
Grouping or usernames
box. If the business relationship you’re using does not announced, click
and type the name of the user you wish to add. Skip this pace if the username already shows up.

Step v:
To change permissions, click the
checkbox in the
Permissions for User or Group
box. For the purposes of solving error 200 with the Vive, y’all’ll want to let access.

Error 109/400

If y’all see this code, it’s commonly because your headset isn’t connecting your GPU correctly. Double check to make certain the link box and your primary display are connected to the aforementioned GPU in your setup. If yous have to use a laptop, brand sure the connectedness is using a detached GPU. Sometimes switching to “prefer maximum performance” or similar settings volition forcefulness the computer to brand the right switch.

Wearing the Vive Cosmos headset.

(Fault 206) Driver not calibrated

Error 206 means that SteamVR was unable to load the calibration for your headset. To solve the effect, you will need to reset your headset to forcefulness the drivers to reinstall.

Reinstall headset drivers

Footstep 1:
Unplug the headset.

Step 2:
In SteamVR, go to
Settings > Reset, and clickRemove all SteamVR devices. Wait a moment.

Step 3:
Plug your headset back in and expect for the drivers to install.

Stride 4:
If repeated attempts exercise not solve the issue, Valve’s support website indicates you may have a faulty unit, and encourages users to
contact HTC through the visitor’s website.

(Error 207) Driver calibration invalid

This error is like to error 206, in that it indicates a failure of the headset calibration to be loaded by SteamVR. As such, the steps to solve the issue are the aforementioned.

Reinstall headset drivers

Step 1:
Unplug the headset.

Stride 2:
In SteamVR, go to
Settings > Reset, and clickRemove all SteamVR devices. Expect a moment.

Step 3:
Plug your headset dorsum in and wait for the drivers to install.

Read:  Which of the Following Terms Refers to Upgrading the Firmware That the Bios Comprises?

If repeated attempts exercise non solve the event, Valve’s support website indicates y’all may accept a faulty unit, and encourages users to
contact HTC through the company’s website.

(Error 208) HMD display non constitute/(Fault 208) HMD found over USB, but monitor not plant

If you encounter mistake 208 with the bulletin “HMD brandish not constitute” or “HMD found over USB, but monitor non plant,” try these potential fixes.

  • Update your graphics card drivers.
  • Double-check the connections for all cables — those from the headset to the link box and the link box to the PC and power outlet alike. The power cord specially can come up loose afterwards heavy employ. This tin be checked by taking off the removable cable panel on the MHD by pushing information technology forward.
  • Make certain the orange-tipped cords from the headset are plugged into the orange ports on the link box.

(Fault 215) GPU connexion failed

This ordinarily happens when your graphics bill of fare has an important update that hasn’t been installed yet. Make sure your GPU is fully updated. If you accept multiple GPUs, it’s a skilful thought to disable or remove all but the one you are using for Vive if this problem keeps recurring. Sometimes DisplayPort adapters can likewise cause this issue and need to be removed to fix it.

(Error 301) Connect failed

This indicates that vrserver.exe failed to commencement or connect. Sometimes, this is caused by multiple instances of the programme running at the same time.

Kill VRServer processes

Pace i:
Quit SteamVR.

Step 2:
Task director
in the Windows search bar, and open up the
Task Manager.

Pace iii:
Locate whatever instances of
that may be running and quit the process.

Step 4:

If this doesn’t solve the consequence, Valve’south support page instructs users to ship in a system report equally detailed in the introduction to this article.

HTC Vive Pro adapter.
Beak Roberson/Digital Trends

(Error 302) Init failed

This error ways that vrserver.exe is experiencing issues starting up.

  • Commonly, this tin be fixed past simply rebooting your calculator and trying once more.
  • If this doesn’t solve the issue, Valve’s support folio instructs users to send in a system report every bit detailed in the introduction to this article.

(1101 through 1112) USB mistake

All mistake letters between 1101 and 1112 are related to USB failures. Reinstalling headset USB drivers can practice the trick.

Reinstall headset drivers

Step i:
Unplug your headset/linkbox, controllers, and any other VR devices you take plugged into your PC.

Step two:
In SteamVR, go to
Settings > Reset,and click
Remove all SteamVR USB Devices.

Pace 3:

Step 4:
Quit SteamVR.

Pace v:
Reconnect your headset, this time using a different USB port, and wait for drivers to install.

Step 6:
Restart SteamVR.

If this doesn’t solve the issue, Valve’s back up page instructs users to send in a system report as detailed in the introduction to this article.

Vive headset issues

Vive Cosmos on shelf.
Dan Baker/Digital Trends

Inside-out tracking keeps messing up

The inside-out tracking used in the Creation requires no setup, merely some players have found that the tracking seems to skip a lot or develop inaccuracies. The key is probably somewhere in the environment itself. If y’all are using a Creation in a dim room, attempt turning on brighter overhead lights. If there are mirrors or reflective surfaces effectually, endeavour removing them and roofing windows to improve the experience. Also, completely bare walls can actually confuse the headset’s data collection, and then having a few basic objects (outside of tripping range) may even be a proficient idea.

Can’t play an older championship on a Cosmos headset

Not all Vive games piece of work with Cosmos models, and sometimes bugs foreclose them from working properly. HTC reports that around ninety% of Viveport’south most pop titles are compatible, but results may vary based on what you like to play. Keep checking for updates to see if bugs are fixed or more compatibility is added.

The Vive Pro two has flickering or artifacts, especially at the edges

Are you using a wired connection? Try switching to wireless. If this improves the issue, then your headset may have a faulty cable, or peradventure a software bug. This is a fairly mutual trouble that is still being investigated. Contact HTC to study the issue, keep SteamVR updated, and play in wireless mode for now.

Controller batteries keep dying

Cosmos controllers last between four and eight hours. That’s a
of variance, based on how often the controller sensors take to recalibrate, lighting, and the content you lot are playing. For at present, the best idea is to continue a few AA batteries around in case the controllers first dying unexpectedly. HTC would like to offer built-in, rechargeable batteries at some time in the future, but that hasn’t happened all the same.

Sound keeps breaking up or dying out

Cosmos models use congenital-in headphones that rely on the USB iii.0 connection. If the headphones are having problems, there’southward probably an upshot with that connection: Make sure y’all are using an up-to-date USB 3.0 port and that connections are secure. Check for cable damage to make sure nothing has gone wrong — the motion-oriented VR experience tin be tougher on USB cables than many other uses.

Controller and base station problems

Controller non connected

If you notice that your controller isn’t recognized past SteamVR, the LED color should requite y’all a clue about what to do.

If bluish

When the controller LED is solid bluish, it means that the controller is non connecting to the PC successfully. You will need to re-pair your controllers. To do so, navigate to
SteamVR > Settings > Devices > Pair Controller.

If red

If the controller’southward LED is solid red and the controller is unresponsive, try resetting your controller.

Step 1:
Simultaneously printing and hold the trigger, card push button, trackpad push, and grip buttons.

Stride 2:
Keeping these buttons held, plug your controller into your PC via Micro USB.

Stride 3:
Subsequently plugging it in, look five seconds and then release the buttons. Your PC will appear to find a new storage device. Ignore this prompt and unplug the controller.

Step 4:
After this, the controller will be reset, and should now be working properly.

If low-cal is not on at all

If the LED is displaying no color, that means the controller is not turned on. Press the organization button to turn on the controller. If the controller does non turn on, then your controller needs to be charged. Plug your controllers into an outlet via the Micro USB and power adapter. While the controllers are plugged in and charging, the LED will brandish unlike colors:

  • Orange — the controller is charging.
  • Greenish — fully charged, controller turned on.
  • White — fully charged, controller turned off.
Read:  Cara Update Firmware Asus Zenfone 2 Laser Ze601kl

Controller Trackpad is twitchy or oversensitive.

If your controller is a chip squirrely or difficult to employ, information technology likely needs to be calibrated or the firmware needs to be updated.

Stride ane:
In SteamVR, navigate to
SteamVR > Devices > Update Firmware.

Step two:
Turn off the controller by property down the Organization push button until the LED turns off.

Stride 3:
With the controller turned off, press and hold the trigger and grip button.

Step 4:
While continuing to hold the trigger and grip push button, press the system push button. The controller should plough back on. When information technology does, it will brand a unlike noise than the usual power-on racket.

1 or both Base Station LEDs won’t change from blue

This generally means that the Vive base station is having difficulty stabilizing. Vibrations or motion can cause this fault to occur.

  • Make certain the bases are securely mounted. If stuck to the wall, tighten all screws and the retaining nut. If on tripods, make sure that movements on the floor aren’t sending vibrations through the frame.

The Base of operations Stations won’t leave standby mode (LEDs dim green)

If your Vive Lighthouse base stations won’t wake up from standby, try this:

  • Unplug the base of operations stations and then plug them back in again.
Front of the Vive Pro logo.
Pecker Roberson/Digital Trends

Base Station LEDs are solid or blinking imperial

This ways the base of operations stations are having difficulty seeing ane some other.

  • Try moving anything that may be blocking the Vive base stations. Including yourself. Follow any on-screen instructions from Steam VR if necessary.
  • Make sure that the base stations are tilted at an angle that lets them encounter each other and the play space.

The base station LED is off

If the LED on the Vive base station is not lit up, that means the base station is not receiving power.

  • Make sure the power cord is plugged in.
  • If the base station is plugged into an outlet simply not powering on, try a different outlet.

Base station optical sync problems

Issues can occur with your base station while trying to sync. Here are some tips to make sure they are fix properly for optical sync.

  • Double-check your base station firmware is upward to date. Get to
    SteamVR > Devices > Update Firmware.
  • Be sure the path between base stations isn’t blocked, so they can see one some other.
  • Don’t set the stations too far apart. They need to be within xvi anxiety of one another.
  • Be sure the base stations are set to the proper modes. Press the mode button on the backs of the stations then that one station is set to “b” and the other “c.”
  • Consider mounting the base stations college upwards, to make certain that your movements in the place space aren’t interrupting their view.

If all the in a higher place criteria are met, the base station LED should turn solid green when synced. If it nevertheless doesn’t, try using the Sync Cable.

Step 1:
Packaged with the Vive box is a long, optional cable. Plug this cable into the base of operations stations.

Step 2:
Button the mode buttons on the backs of the stations until one station displays “a” and the other “b.”

Step 3:
If washed correctly, the base station LEDs should at present be solid green.

Software and headphone problems

Device icon flashing green in Steam VR

This means that one or more of your devices are not tracking properly (or at all). It should be piece of cake to rectify the trouble.

  • All devices demand to be in view of at least one base station. If they are not, adjust your setup so all devices tin be seen.
  • Exist sure the base station is fully powered on and synced. The base of operations station LEDs will exist light-green if everything is on and working correctly.
  • Make sure controllers are on and charged. The LEDs should be green.
  • Brand sure the headset is correctly plugged in. The LED should be green.
  • Cheque all the firmware is upwardly to date. If not, consider upgrading information technology. Follow the on-screen instructions to do so.

Decadent or missing SteamVR files

An incomplete installation may crusade corrupt or missing files. You need to brand certain your installation is fully intact.

Step 1:
Leave SteamVR.

Step ii:
Go to the Steam desktop client.

Step three:
Navigate to
Library > Tools, and right-click on SteamVR. Select

Footstep 4:
Open the
Local Files

Step 5:
Verify Integrity of Tool Cache.

No sound when using the Vive headphone port

If yous’re not getting whatever sound through your headphones, headset, or speakers and then you’re not solitary. There are lots of things you can endeavour to become your Vive audio working.

  • Be sure SteamVR is notwithstanding open up and running.
  • Bank check the headphones are definitely plugged in. If using the Palatial Sound Headstrap, make sure the headphones connect to the headphone extension cablevision, and that that connects into the headset itself.
  • The headset may be in standby. Move it to make certain it wakes upwards.
  • In steam VR, right-click and select
    Settings > Audio. From
    Mirror audio to device
    drop-down menu, select your desired device.
  • Exist sure the Vive is receiving sound from Steam VR. In Steam VR, right-click, select
    Settings > Audio. In the
    Set Playback Device
    drop-downwards box, choose
  • If you are using speakers, right-click in SteamVR and select
    Settings > Sound. In the
    Set Playback Device
    drib-down box, choose
    USB-Audio Device.
  • Windows may not be sending audio
    to the Vive headset. Right-click on the Volume icon in the Windows taskbar, then click
    Playback devices. Select
    HTC-VIVE-0 and set it equally the default device. If the Vive does not appear from this list, try selecting
    Show Disabled Devices
    Show Disconnected Devices.
  • Make sure the Vive’s book slider in the Windows Volume Mixer is upwardly. Right-click the Volume icon in the Windows job tray and click
    Open Volume Mixer. Locate the slider for
    and set its book to 50% or so.
  • Check the app or games volume. Correct-click the Volume icon in the Windows task tray and open volume mixer. Notice the game or program you lot are running, and brand sure its volume is set to at least 50% or so.

No sound when using USB headphones with the Vive’southward extra USB port

If you find in that location’s no sound coming through your headphones and you lot’re plugged into the actress USB port, here’southward what to do:

  • Be sure the Vive is receiving sound from Steam VR. In Steam VR, right-click and select
    Settings > Sound. In the Set Playback Device drop-downwards box, selectHTC-VIVE.
  • Windows may non be sending sound to the Vive headset. Correct-click the Volume icon in the Windows task tray and select
    Playback devices. Select
    HTC-VIVE-0and fix it as the default device. If the Vive does not appear from this list, try selecting
    Bear witness Disabled Devices and
    Show Disconnected Devices.

Sound stops playing while plugged into the Vive headphone jack

A few people take had trouble with the audio cutting off while plugged into the Vive headphone jack. There are a few things worth checking to bring it back.

  • Be sure SteamVR is yet open up and running.
  • The headset may be in standby way. Move information technology to make certain it wakes up.
  • To maintain audio playback, even while the headset is asleep, right-click the Book icon in the Windows task tray and and then select
    Playback devices. Select
    ii-USB Audio Device, and ready it every bit the default device. If the Vive does not appear from this list, attempt selecting
    Testify Disabled Devices and
    Show Asunder Devices.
  • If the in a higher place methods do non solve the issue, endeavor using a USB headset in conjunction with the Vive’s extra USB port.
Read:  Samsung Galaxy S4 I9505 Firmware 4.2.2 Download

Static electricity when using earbuds

If you get a surprise stupor from your Vive while using earbuds it might just be static. This commonly isn’t indicative of an consequence, as a buildup of static or minor static shock does not necessarily mean your Vive is malfunctioning and isn’t cause for worry. It tin, however, be annoying.

  • Valve notes on its support folio that this ordinarily occurs in much the same way static stupor builds from something like, say, socks on carpet or a balloon rubbing on hair.
  • Endeavour using anti-static sprays and lotions, and clothing article of clothing made of natural fibers to reduce the buildup of static electricity.
  • Dry environments are particularly susceptible to this, but using a humidifier should be sufficient plenty to add moisture to the air and prevent any static buildup.

Vive shows as your figurer’s main monitor after an upgrade

A lot of people have constitute that, subsequently upgrading to Windows 10, Vive shows equally the computer’due south main monitor – not exactly an ideal situation. Fortunately, it’s very easy to set. Simply disconnect your headset for the link box, and reboot your calculator. When your computer is finished rebooting, reconnect your headset cablevision to the link box. Everything should be fine now!

Your Vive keeps skipping frames no thing what you lot try

If this is happening with everything y’all effort, it’s probably considering of how your computer is controlling the display. At that place are a lot of settings that can cause this, but one of the most common is dark style. Check your computer and make sure no dark manner settings are enabled. Also brand sure you aren’t running any other types of software that deliberately alter how your computer’s display looks.

Variable effulgence or images that go along darkening

Newer headsets like the Vive Pro 2 may feel some problems with their automatic brightness adjustments. Users may find that the screen switches brightness levels in a distracting way, or immediately darkens when looking in a specific direction, making visibility a trouble.

If you find this is a problem, visit SteamVR settings. SteamVR recently added a universal brightness slider to command brightness manually. You may also desire to meet if there are in-game options for adjusting the brightness.

Vive Wireless Adapter problems

Close-up of Vive Pro headset.

The HTC Vive Wireless Adapter is one of the best upgrades y’all can brand to your VR experience for room-scale play, but the experience isn’t mistake-free.

No power to the headset

If you discover that your headset doesn’t piece of work or power on at all with the Vive wireless installed, try these fixes.

  • Make certain that the battery is plugged into the Vive Wireless adapter via the USB cablevision.
  • Brand sure the Vive Wireless adapter is plugged into the Vive headset with all iii cables.
  • Brand sure the bombardment is charged. Press the push on it to check.
  • Press the button on the battery, followed by the push on the Vive Wireless Adapter to turn them both on.

If you have washed all of the above, try running the Vive Wireless connection software once more, and so launch SteamVR.

Stuck initializing

If yous find that the Vive Wireless connection awarding gets stuck on “Initializing,” or whatever of its other intermediary steps, at that place are some things you lot tin can try that should fix information technology.

  • Make sure that you aren’t over-extending the wireless transmitter/receiver. The coaxial cable for the wireless transmitter/receiver can exist extended past a further 2M, just beyond that, yous are likely to face problems. It’s as well worth making sure that it’s a high-quality coaxial cable that yous’re using.
  • Make sure that the Vive Wireless Adapter is within visual range of the wireless transmitter/receiver. 30ft is about the maximum range they should be apart.
  • Try changing the PCI-Limited menu to a different PCIe slot.

If none of that works, try the following:

Footstep i:
Search for
Device Manager in the Windows search box and select the respective event.

Pace 2:
Observe the
Intel Wireless Gigabit VR Adapters
and click the pointer side by side to it. Right-click the
Intel Wireless Gigabit W11100 VR Device
and select

Step 3:

Now, right click on Intel Wireless Gigabit W11100 VR Device and select the “Enable” option.

Later on that, y’all can try to run the Vive Wireless application again. If everything goes co-ordinate to plan, it should now find your headset.

Grey screen during play

  • Bank check the Vive Wireless Adapter to make sure information technology’s not too hot. If the adapter exceeds maximum temperature limits, information technology will turn off and halt your VR performance until it cools off enough to outset again. You maintain cool temperatures by adjusting your thermostat to a lower temperature, pointing a portable fan straight on the adapter, or strategically planning breaks in usage.
  • Give your batteries a total charge. If your batteries are fast budgeted a depression charge, your gaming feel will become tedious and erratic.
  • Brand sure that in that location is a clear and visible path betwixt your headset, the receiver, and the transmitter.

Despite the kinks in connecting VR headsets to your devices, VR headsets are in high demand, gaining popularity by the minute. Nosotros are confident that this article provides you with thorough guidelines to assess and resolve any future issues you may have with HTC Vive.

Editors’ Recommendations

Steam Vr Wont Detect Controllers When Updating Firmware

Check Also

How to Upgrade 2016 Equinox Radio Firmware

How to Upgrade 2016 Equinox Radio Firmware

How to Upgrade 2016 Equinox Radio Firmware Aye. You can manually check for software updates …