Of import:
This file is but for utilize with the models identified. Not all models are sold in all countries.

This information is for the following models:

  • DSC-RX100M5

About this download

Benefits and improvements

This utility updates the photographic camera firmware to version ii.00 and provides the post-obit benefits:

Improvements over version 1.01:

  • Improves operability with the
    MPK-URX100A Underwater Housing:

    • Adds the
      Underwater Auto
      feature in the
      White Balance
      settings
    • Adds the
      Flash Off
      fashion when the
      Flash
      unit is popped-up
  • Improves the overall stability of the camera

Benefits provided by previous updates and included in version ii.00:

  • Improves a condition where the photographic camera will non ability-on after making certain setting changes
  • Improves overall stability of the camera

Organisation Requirements

Operating Systems

  • Windows Vista®
  • Windows Vista® 64-bit
  • Windows® 10
  • Windows® ten 64-bit
  • Windows® 7
  • Windows® vii 64-bit
  • Windows® 8
  • Windows® 8 64-scrap
  • Windows® 8.1
  • Windows® 8.ane 64-bit

File Info

File Name

  • Update_DSCRX100M5V200.exe

File Version

  • 2.00

File Size

  • 243.74 MB

Release Appointment

  • 03-29-2017

Earlier You lot First

Determine if Your Photographic camera Needs the Update

This update merely applies to
DSC-RX100M5
cameras that currently have a firmware version
ane.01. If your camera firmware version is already version
ii.00, this update is not necessary.

Cheque the version of your photographic camera firmware:

  1. Power on the camera.
  2. Press the
    Carte
    button.
  3. At the
    Bill of fare
    screen, employ the
    Control Cycle
    to select
    Setup, then select
    Version.

    Sony Rx100 V Firmware Update How to

  4. The firmware version is displayed on the LCD screen.

    Firmware Version Screen

  5. If the current firmware version is
    ii.00
    or higher, the camera does not need this update.
  6. Press the center push button of the
    Control Bicycle
    to close the version number brandish.
Read:  Download Firmware Coolpad E 570 Mtk

Important Notes

  • Alert! This utility is only for utilize with the Sony®
    DSC-RX100M5
    photographic camera. Do not install this utility with any other model.
  • WARNING! This Digital Camera firmware update and whatsoever changes incurred by information technology are permanent. Information technology is non possible to return to a previous firmware version subsequently updating this firmware. Past continuing this update process and downloading and updating this firmware, you lot acknowledge that y’all are aware and empathize that this update cannot exist reversed.
  • Alarm! Do not permit the computer to enter
    Sleep (Standby)
    mode during the update procedure. To alter your settings, please refer to your calculator manual or consult the manufacturer.
  • This update process requires the following items for proper updating:

    • A computer with:

      • Bachelor Hard disk drive Infinite:
        500 MB or more
      • Installed Retentivity (RAM):
        512 MB or more
      • A USB port.
      • One of the following operating systems installed:
        • Microsoft® Windows® 10
        • Microsoft® Windows® eight/8.ane
        • Microsoft® Windows® seven (with Service Pack 1)
        • Microsoft® Windows Vista® (with Service Pack two)

          Note:
          Starter Edition of Windows Vista is not supported.

    • Camera power supply:

      • This update can only exist performed when the remaining battery level has three bars
        Battery Indicater
        or more.

        When performing the firmware update, utilise a fully charged
        NP-BX1
        rechargeable battery pack, or the Air-conditioning adapter/charger.

        WARNING! The camera may not operate properly if the power is interrupted during the update.

    • USB cable:

      • Apply only the USB cablevision supplied with the photographic camera.

        IMPORTANT: Update functionality is not guaranteed with whatsoever other USB cable.

  • To ensure that no other programme interferes with the installation, save all work and close all other programs. The Taskbar should be articulate of applications before proceeding.
  • Information technology is highly recommended that you print out these instructions for use every bit a reference during the installation process.
Read:  Ssd Making Noise Can Firmware Update Help

Prepare the Photographic camera for the Firmware Update

  1. Remove the retention card from the camera
  2. Ensure the photographic camera has a fully charged bombardment pack or connected to the Air-conditioning adapter/charger.

Download & Install

Download and Update the Firmware

  1. WARNING! Exercise not allow the computer to enter
    Sleep (Standby)
    style during the update process. To modify your settings, please refer to your computer transmission or consult the manufacturer.

  2. Download the
    Update_DSCRX100M5V200.exe
    file to a temporary or download directory (please note this directory for reference).

    Note:
    For Windows 8/8.one and ten, the default settings for Internet Explorer® will save the file in the
    Downloads
    folder. For Windows x, use
    File Explorer
    to locate the
    Downloads
    folder, for Windows eight/8.1, click the
    Desktop
    tile from the
    Start
    screen and then locate the downloaded file using Windows Explorer.

  3. Become to the directory where the file was downloaded and double-click the
    Update_DSCRX100M5V200.exe
    file to begin the updater.
  4. The
    Organization Software Updater
    starts.

    Connect the Camera Screen

  5. Printing the
    Menu
    button on the camera.
  6. At the
    Menu
    screen, utilize the
    Control Cycle
    to select
    Setup,
    USB Connection, and then ensure that
    Mass Storage
    is selected.

    Mass Storage USB Setting

  7. Connect the camera to the computer with the supplied USB cable.

    Note:
    On the camera screen,
    USB Way
    is displayed.

    • If the computer displays the message,
      Could not find the camera for this update:

      1. Disconnect the USB cable and connect information technology over again.
      2. If the computer has multiple USB ports, connect to a different port.
    • If a bulletin appears on the computer recommending a restart:
      1. Disconnect the camera from the figurer.
      2. Remove the battery and/or AC adapter from the camera, then reconnect them.
      3. Restart the computer and then retry the update from starting the
        Software Updater
        (step 2 above).
  8. When the updater recognizes the camera connectedness, the post-obit screen is displayed.

    Camera Connected Screen

  9. Confirm that
    Current version
    is
    1.01, and that the
    Version later on the update
    is
    two.00, so click
    Adjacent.

    Note:
    If the
    Current version
    is
    two.00, this update is non needed. Stop the USB connexion, and click
    Finish.

  10. The following screen appears and the photographic camera automatically resets.

    Camera Reset Screen

  11. After the camera resets, the following screen appears and the update starts.

    Note:
    The progress bar is displayed during the update which takes about 15 minutes.

    Run the Update Screen

  12. WARNING! Do non ability off the photographic camera or disconnect the USB cable during the update.

  13. When the update is consummate, the photographic camera will automatically restart and the following screen is displayed.

    Update Complete Screen

  14. Expect until the camera finishes restarting, click
    Cease, and and then disconnect the USB cable.

    Note:
    Afterward restarting, the bulletin
    Recovering data Delight wait…
    may rarely display. This is normal, please wait until this message goes away.

    Recovering data Please wait... message

Bank check the Firmware Version After Updating (optional)

  1. Power on the photographic camera.
  2. Printing the
    Menu
    button.
  3. At the
    Carte
    screen, utilise the
    Control Wheel
    to select
    Setup, and then select
    Version.

    Sony Rx100 V Firmware Update How to

  4. The firmware version is displayed on the LCD screen.

    Firmware Version Screen

  5. If the current firmware version is
    ii.00, the firmware update was successful.

    Note:
    If the firmware version number is not
    2.00, delight download and install the firmware update once more.

  6. Press the center button of the
    Control Wheel
    to close the version number display.