Samsung Galaxy Amp Prime Sm-j320az Firmware No Funciona Cuando Esta Actualizando Y Se Congela

#1

So my milky way amp prime(Cricket, SM-J320AZ) is stuck in a bootloop, and I have tried to research why, withal every reason seams plausible. And so sick start at the commencement…

I used odin with a boot.tar in the ap slot so that kingroot could root my phone. it was successful at rooting my device only refused to switch with supersu me( I now know I needed kingroot iv.5) anyways kingroot deployed equally a system app which in plough compromised my safetynet status. I couldn’t use a number of apps and services, so I decided to flash the stock rom for my device (found here on xda) it was a little over 1gb and I followed directions. yet when odin successfully flashed it, the device rebooted and now is stuck in a bootloop. information technology loads the Samsung logo twice then reverts to the android recovery. I tried to wipe cache division and reboot to no avail. I then tried to wide information/factory reset and reboot, only its still stuck in bootloop.

I originally made a backup with Samsung smart switch, but now it says the device is unsupported.

Is at that place anything I tin can practice? ive read soft bricks and bootloops can be stock-still, but I’m not finding much on my device. any help is greatly appreciated,

sorry if this is in the wrong area, I’yard still new to xda

ashyx

Inactive Recognized Contributor

#ii

So my galaxy amp prime(Cricket, SM-J320AZ) is stuck in a bootloop, and I have tried to research why, however every reason seams plausible. And then sick commencement at the offset…

I used odin with a boot.tar in the ap slot so that kingroot could root my telephone. it was successful at rooting my device but refused to switch with supersu me( I now know I needed kingroot iv.5) anyways kingroot deployed equally a system app which in turn compromised my safetynet condition. I couldn’t use a number of apps and services, so I decided to flash the stock rom for my device (found here on xda) information technology was a little over 1gb and I followed directions. nonetheless when odin successfully flashed information technology, the device rebooted and at present is stuck in a bootloop. it loads the Samsung logo twice and then reverts to the android recovery. I tried to wipe enshroud sectionalization and reboot to no avail. I then tried to broad information/factory reset and reboot, but its nevertheless stuck in bootloop.

I originally made a backup with Samsung smart switch, but now it says the device is unsupported.

Is there anything I can do? ive read soft bricks and bootloops can exist fixed, but I’m not finding much on my device. any help is greatly appreciated,

sorry if this is in the incorrect area, I’chiliad still new to xda

Betoken to the firmware you downloaded and also which version of odin you used.

#iii

Point to the firmware you downloaded and also which version of odin you lot used.

I extracted this
AP_J320AUCS2AQA1_CL7663112_QB12351033_REV00_user_low_ship.tar
i believe is the firmware, and I’m using odin three.11.1

I as well asked in folio 17 of the original thread
I’m only running out of options here lol

#4

you actually posted correct to a higher place me in that thread!

ashyx

Inactive Recognized Contributor

#5

I extracted this
AP_J320AUCS2AQA1_CL7663112_QB12351033_REV00_user_low_ship.tar
i believe is the firmware, and I’m using odin 3.11.i

I as well asked in folio 17 of the original thread
I’m just running out of options hither lol

I suggest you flash the entire firmware not just AP.

#6

I suggest you wink the entire firmware not but AP.

Practise u happen to know where i tin can observe the residual?

#7

Would i have to re sectionalization it? Because im trying to inquiry and larn, but i was under the impression that AP was the but spot to put firmware

#9

The files say md5 error, binary failed
I call back im missing something here

#11

You tried to wink only AP but for J320A, here you have full firmware for J320AZ:
https://drive.google.com/file/d/0B5vkBxwCY_cCSkh0UHNZMmxmcVk/view

Well-nigh these files worked, i checked auto reboot, re partition, and r reset. I set the pit file and all 4 others in right spot. Yet it failed a few times. I unchecked the bl file and it succeeded. When i reboot it shows logo twice then shows android proverb installing sys update…. then error… and then goes back to recovery.

Essentially i flashed everything except the bl file. And when i try to flash it by itself it says

Initialization

Erase…
Set up PIT file
DO Non Turn OFF TARGET
get pit for mapping
Firmware update starting
Single download
Sboot.bin
NAND write start!
Neglect!

Complete(write) operation fail

…………

Im guessing the problem is with my BL file
When i go to boot phone it shows an android and says installing system update so says fault very quickly and goes to recovery.

I experience like thats progress but why would merely BL file be failing? The dark-green bar in odin goes halfway and then fails (with simply bl file checked)

ashyx

Inactive Recognized Contributor

#12

Most these files worked, i checked auto reboot, re partition, and r reset. I set the pit file and all 4 others in correct spot. Withal information technology failed a few times. I unchecked the bl file and information technology succeeded. When i reboot it shows logo twice then shows android saying installing sys update…. and so error… and so goes dorsum to recovery.

Substantially i flashed everything except the bl file. And when i try to flash information technology by itself it says

Initialization

Erase…
Set PIT file
Practise Non TURN OFF TARGET
get pit for mapping
Firmware update starting
Single download
Sboot.bin
NAND write offset!
Fail!

Complete(write) performance neglect

…………

Im guessing the problem is with my BL file
When i go to boot phone information technology shows an android and says installing organization update then says error very quickly and goes to recovery.

I experience like thats progress but why would merely BL file be failing? The greenish bar in odin goes halfway then fails (with just bl file checked)

It WILL neglect at the bootloader as it’s not intended for your device. Merely flash the correct firmware as advised.

#xiii

It Will fail at the bootloader equally it’s not intended for your device. Just flash the correct firmware as advised.

Thats what i hateful, i extracted all 5 files as advised(a few comments agone) it had

BL
AP
CP
CSC
PIT

I placed them in respective odin slot (even pit, with re sectionalization) nonetheless it fails at the BL slot)

I flash it all except bl its even so in bootloop

Besides Says dm-verity verification failed

Mind y’all, that i am flashing the right firmware now. I realize my original mistake by flashing the 320a. But these are the stock 320AZ files i am now speaking of…

ashyx

Inactive Recognized Contributor

#xiv

Thats what i mean, i extracted all v files as advised(a few comments ago) information technology had

BL
AP
CP
CSC
PIT

I placed them in respective odin slot (fifty-fifty pit, with re partitioning) yet information technology fails at the BL slot)

I flash information technology all except bl its still in bootloop

Besides Says dm-verity verification failed

Listen you lot, that i am flashing the correct firmware now. I realize my original mistake by flashing the 320a. Only these are the stock 320AZ files i am now speaking of…

This probably means yous had a newer firmware revision on your device.