Roli Noise App Firmware Update Cant See
Information technology’southward important to go along your BLOCKS’ firmware up-to-date. There are two methods you can try, depending on whether or not you have an iOS device.
If Dashboard is showing you lot an error message when updating your BLOCKS, you may be able to update past following the NOISE steps given underneath. If you are withal having bug, please
speak to our support team.
Tabular array OF CONTENTS
Updating BLOCKS firmware in ROLI Dashboard (macOS/Win)
one. Accuse your BLOCKS
ii. Ensure that you have the latest version of ROLI Dashboard installed
3. Connect i BLOCK at a fourth dimension
Connect your Lightpad or Seaboard Cake via USB or Bluetooth (macOS only), or connect Live, Loop, or Touch Blocks via Bluetooth (macOS only).
Note: If you do not have an Apple device, Control Blocks may exist updated by connecting them via DNA to a USB connected Lightpad or Seaboard Block, and dragging a firmware file onto the visualization of the Control Block in ROLI Dashboard.
Please meet
this commodity
for further information, and to download the latest versions of the BLOCKS firmware for each Block.
five. Update the firmware of one Cake
With the BLOCK highlighted in ROLI Dashboard, click “Updates” to update the firmware.
half dozen. Once the update is consummate, reset your BLOCK
To switch the Seaboard or Lightpad BLOCK on or off, hold the power push in the front centre.
To switch the Live, Loop or Touch BLOCKS on or off, hold both buttons on the far left.
8. Update any other BLOCKS individually
If y’all have any other BLOCKS, get back to stride 3 and repeat the procedure for each Block, connecting each of them individually to update the firmware for each ane.
Updating BLOCKS firmware in Dissonance
one. Accuse your BLOCKS
2. Ensure that yous accept the latest version of Racket installed on your device
Check for app updates in the App Store and install them if needed.
3. Restart your mobile device’due south Bluetooth
Open your device’south preferences. Go to Bluetooth, and switch information technology off and on again.
4. Connect i BLOCK at a fourth dimension by Bluetooth
Disconnect the USB cablevision from whatever Lightpad or Seaboard BLOCKS.
Open up whatever Project and tap the
Studio
tab:
|
|
Tap
Connect BLOCKSand cull your device from the list.
5. Update the firmware of one Block
Tap the
Update
button in Racket. The app will bank check for bachelor firmware updates and run through a short procedure which volition have around a infinitesimal depending on your mobile device’s net connectedness.
6. If the update is not at first successful, try again
If the update displays an error, just disconnect the Block from Bluetooth and go back to step 3. Yous may just need to retry a few times to ensure a successful download of the firmware to the Block.
seven. In one case the update is complete, reset your Block
To switch the Seaboard or Lightpad Block on or off, concur the power button in the front centre.
To switch the Live, Loop or Touch Blocks on or off, hold both buttons on the far left at the same fourth dimension for 3 seconds.
8. Update any other BLOCKS individually
If you have any other BLOCKS, go back to footstep iii and repeat the process for each Cake, connecting each of them individually to update the firmware for each one.
9. Disconnect all but the Lightpad or Seaboard BLOCKS from Bluetooth
- One Lightpad or Seaboard Block acts as the central hub for all other Blocks to communicate with your mobile device.
- Disconnect all just a single Seaboard or Lightpad Block from Bluetooth.
- Connect remaining Blocks to the first past the magnetics Deoxyribonucleic acid connectors.
Still Stuck?
If you lot follow these steps carefully you can be sure that the firmware volition update and you lot can get dorsum to making music! If you discover that you are not able to update a BLOCKS after several attempts, please contact the support squad
here. Nosotros’re here to help!
