Return Galaxy Tabpro 8.4 to Stock Firmware

Return Galaxy Tabpro 8.4 to Stock Firmware

TabPro 8.four inch 3G edition

Galaxy TabPro 8.4 inch 3G [SM-T321]

TabPro viii.4 inch WiFi edition

Galaxy TabPro 8.4 inch WiFi [SM-T320NU]

TabPro 8.four inch WiFi [SM-T320K]

Milky way
TabPro 8.4 inch WiFi [SM-T320U]

TabPro 8.four inch WiFi [SM-T320]

TabPro 8.iv inch WiFi [SM-T320Z]

TabPro 8.4 inch LTE edition

Galaxy TabPro 8.4 inch LTE [SM-T325]

How to download correct firmware file

This is the important office!

Be sure to
check and
the correct the model no. of your Galaxy TabPro. So based on your device’s model no., wait for the advisable firmware build from above.

You tin
identify the model no.
using an app chosenDroid Info, or simply bank check information technology on its packaging box, or nether Settings > Nigh. Some other solid trick would exist to wait at the packaging box of your device (in instance yous can’t ability on the device because it is bricked).

Read:  How to Update Firmware on Zoom Router

Now that y’all know the model no.,
download the latest firmware
from above for that model no. exactly.

Next, install the firmware on your Galaxy TabPro by following the guide linked right beneath.

How to Install Firmware

Showtime, read our disclaimer, then take backup and then follow the guide below to install the firmware.

Disclaimer: Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to be cautious of information technology. In any case, you just are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Fill-in, backup, backup! Create an appropriate


of contacts, pictures, videos, songs and other of import files stored on your device earlier proceeding with the steps below, then that in instance something goes wrong you’ll accept a fill-in of all your important files. Sometimes, firmware installation may delete everything on your device! Like, when y’all modify the CSC of your device, knowingly or not.

Step-by-step Firmware Installation Guide

Let’s come across how to install the firmware on your Galaxy TabPro. Make sure you have more than 30% battery on your device.

Pace one.
Make sure you have downloaded the correctfirmware file on your PC. Run into above for how to download correct firmware file for your Galaxy TabPro and download links.

Step 2.

Samsung USB driver
 (method 1 on the linked page) starting time of all. Double click the .exe file of drivers to begin the installation. (Not required if you accept already washed this.)

Footstep 3.Also,

download Odin

PC software (latest version).

Footstep four. Excerpt
the firmware file now. You can utilise a free software like vii-zip for this. Install seven-zip, then right click on firmware file and under 7-zip, select ‘Extract here’. You should get a file in
format now. (You may get 4 or more files, with AP, BL, CP or CSC etc. written at the showtime of those files.) We will be loading this file into Odin, to be installed on device (in stride 10 below).

Read:  Dell Firmware Update Linux Iso Missing Packages Reddit

Step 5. Extract
file. You should get the Odin exe file (other files could be hidden, hence not visible).

Footstep 6. Disconnect
your Galaxy TabPro from PC if it is connected.

Step 7.
Boot into
download mode:

  • Power off your device. Await for 6-7 seconds after screen goes off.
  • Press and hold the three buttons Book downwards + Home + Ability together until you run into Alarm screen.
  • Press Volume Up to go on to download mode.

Step 8.
Double click on Odin
file (from step five) to open the
window every bit shown below. Be careful with Odin, and exercise only as said to preclude problems.

Return Galaxy Tabpro 8.4 to Stock Firmware

Step 9. Connect
your device now using USB cablevision. Odin should

your device. It’s a must. When information technology recognizes, you will see
Added!! message appearing in the Log box in bottom left, and the start box nether ID:COM volition also show a no. and turn its groundwork blue. Look at the pic below.

  • You cannot go along until y’all become the Added!! message, which confirms that Odin hasrecognized
    your device.
  • If you lot don’t go Added!! message, you need to install/re-install
    over again, and use the original cablevision that came with device. Mostly, drivers are the problem (look at stride two to a higher place).
  • Yous tin try different USB ports on your PC too.

Pace ten. Load
firmware file
into Odin. Click the
push on Odin and the select the .tar.md5 file from above.

Load the firmware files(south) on your device. This depends on how many files you got in pace 4 above upon extracting the firmware .zip file.

Case i

If yous got a
single .tar/.tar.md5 file, then load this into AP tab of your Odin software. Then go to adjacent stride.

To load the file, click on AP tab, select the single firmware file starting with AP text, wait for it to load, and and then skip to step eleven, ignoring the rest of the part of this step.

Case 2:

If you got
more than i .tar/.tar.md5 file, so you must be having files starting with AP, CSC, Home_CSC, BL, CP, etc. stuff. In this case, cull the files as following. Select the firmware files every bit follows.

  • Click on BL tab, and select the file showtime with BL text.
  • Click on AP tab, and select the file showtime with AP text.
  • Click on CP tab, and select the file beginning with CP text.
  • [Different] Click on CSC tab, and select the file showtime with HOME_CSC text. If HOME_CSC file isn’t available, then select the file beginning with CSC text.
Read:  Lg V20 Stuck on Firmware Update Screen UPDATED

About CSC file: Using the HOME_CSC file won’t reset your device, and information on the phone shouldn’t be deleted. However, when we select regular CSC file, and information technology results in CSC on device being unlike than that in CSC file, your phone will be formatted automatically. You tin can even cull to ignore loading the CSC file, that may do alright too. But if it doesn’t works out, repeat the whole process and select CSC file this fourth dimension around.

  • Info:
    When you load files, Odin checks the md5 of firmware file, which takes time. So, only look until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’due south normal. Binary size will also show upwards in Odin.

Step 11.
Click on Options tab, and make certain
check box is
Not selected. Don’t use PIT tab, ever.

Go dorsum to
Log tab
now, as it volition bear witness the progress of firmware installation when yous hit kickoff push button in side by side step.

Pace 12.
Verify that everything is okay every bit mentioned above. When satisfied, click the
push on Odin now to start flashing the firmware on your device.

Wait till installation is finished, after which your device will reboot automatically. You’ll becomePASSbulletin equally shown below upon successful installation from Odin.

Some errors you lot may run into, and with corresponding solution.

  • If Odin gets stuck at
    setup connection, and then you need to do this all once again. Disconnect your device, close Odin, boot device into download manner again, open Odin, and and so select the file and flash it again equally said higher up.
  • If yous get
    in the top left box, then as well you need to flash the file over again as stated merely to a higher place.

That’s it. Permit device restart automatically.

First beginning of the device may have time, and so wait patiently once again. When it has, verify the installation.Bank check
the Settings > Well-nigh device, to confirm new build no. based on the firmware you simply installed.

Need help?
Sure let us know via comments below.

Return Galaxy Tabpro 8.4 to Stock Firmware

Check Also

How to Update Firmware on a Samsung Hd204ui

How to Update Firmware on a Samsung Hd204ui

How to Update Firmware on a Samsung Hd204ui #i What the heck…I just got a …