Reset T-mobile Asus Router to Stock Firmware

Reset T-mobile Asus Router to Stock Firmware

Wi-Fi CellSpot Routers are discontinued and are no longer available for purchase. If you want help with Wi-Fi CellSpot Router setup or connectedness problems, we accept you covered.

Fix a Wi-Fi CellSpot Router

Get to know your router

T-Mobile’s Wi-Fi CellSpot Router improves the Wi-Fi point in your home. The router lets you employ
Wi-Fi Calling
for calls at home, instead of the cellular network. Calls are prioritized over other Wi-Fi data for all-time call quality.

It doesn’t boost wireless network signal, only it does provide:

  • iii,000+ sq. ft of Wi-Fi for placing calls at home.
  • 2.iv & 5 GHz bands
  • IEEE 802.11a/b/m/n/ac
  • IPv4 & IPv6
  • Security: WEP, WPA-PSK/ENTERPRISE, WPA2-PSK/ENTERPRISE, WPS


Internet requirements

You lot need internet with reliable high-speeds to support Wi-Fi Calling. Endeavour a
speed exam
when connected to your home cyberspace to check for:

  • 2 Mbps upload speed
  • 2 Mbps download speed

Set up your router

Video non loading? Delight
reload this folio
and try once more.

Configuración de video (Español)

Connect your telephone to the router

  1. On your phone, turn on Wi-Fi (If you lot need steps, find your phone on the
    Devices
    page).
  2. Select ane of the T-Mobile Wi-Fi networks:
    • CellSpot_2.4GHz_[four-digit ID]
    • CellSpot_5GHz_[4-digit ID]
    • (If the network name was changed, select the new network proper noun instead.)
  3. Enter the password on the white sticker on the back of your router.

  4. Update the network proper name and countersign on your computers, tablets, etc.

Change network name (SSID) or countersign

  1. Brand sure your computer or phone is continued to the router.
  2. Enter either URL in the spider web browser:
  3. Log in to the configuration folio using your login name and password.
    • The default router login is proper noun (admin) and password (password).
    • If you ready your own countersign and have forgotten it,
      reset the router.
  4. Come across the SSID and password steps beneath to update.
Read:  How to Transition From Verizon Branded Galaxy S8+ Software to Stock Unlocked S8+ Firmware

Network name (SSID)

  1. From the General tab, select the
    CellSpot_5GHz_[4-digit ID]
    and change its proper noun.
  2. Update the
    WPA Pre-Shared Primal
    to your previous network password.
  3. SelectUtilize.
  4. Reconnect your devices to the Wi-Fi network.
  5. Utilise the 2.4GHz ring if connecting existing devices (printers, cameras, etc.).

Password

  1. On the Network Admin page, become to the
    Arrangement Status
    department of the Network Map.
  2. Select the
    ii.4GHz
    tab.

    • In the
      Authentication Method
      drop-downward, chooseWPA2-Personal.
    • In the
      WPA-PSK
      key field, enter a password that is at least 8 characters.
  3. Select the
    5GHz
    tab.

    • In the
      Authentication Method
      drop-down, chooseWPA2-Personal.
    • In the
      WPA-PSK
      central field, enter a password that is at least viii characters. Y’all can employ the same password you entered in stride four.
  4. SelectUse, and the router restarts.
  5. Once restarted, reconnect using your new password. If you lose this countersign, the router must be reset to its default settings

Reset router

Restart router & modem

Restart the modem and router before performing a full reset. This tin can set up pocket-size problems, and also check for and install firmware updates.

  1. Unplug your modem.
  2. Unplug your router.
  3. Turn off your computers.
  4. Plug in the modem, and wait for ii minutes.
  5. Plug in the router, and look for ii minutes.
  6. Turn the computers on.

Reset the router

  1. Press and hold the
    Reset button
    on the back of the router for eight seconds.
  2. Release the
    Reset
    push button.
  3. The router is at present reset to the manufacturing plant default settings.

Default router settings

Resetting the router restores it to its default settings, which are listed below.

  • User Proper name:
    admin
  • Password:
    password
  • Enable DHCP:
    Yes (if WAN cable is plugged in)
  • IP address:
    192.168.29.1
  • Domain Proper name:
    (Blank)
  • Subnet Mask:
    255.255.255.0
  • DNS Server one:
    192.168.29.1
  • DNS Server 2:
    (Blank)
  • SSID (ii.4GHz):
    CellSpot_2.4GHz_(four digit MAC ID)
  • SSID (5GHz):
    CellSpot_5GHz_(four digit MAC ID)

If your previous network proper name is different than the defaults, update your existing device network settings.

Read:  Amd Turion 64 X2 Firmware Update for Spectre

Troubleshoot issues with your Wi-Fi CellSpot Router

  1. Brand sure all cables are connected to the right place, and plugged in completely.
  2. Plug the router into another ability outlet to test it.
  3. Make sure the router is set up properly. For steps, meet
    router setup
    in a higher place.

Forgot router admin username or password

If you forgot your username or countersign, follow
reset the router
higher up.

Tin can’t access router admin pages

If you can’t admission the router admin, follow these steps.

  1. Make sure your computer or telephone is connected to the router.
  2. On the computer, enter either address in the address bar and open the folio:
  3. Log in to the configuration folio using your login name and password. The default router login is name (admin) and password (password).
    • If this is the showtime fourth dimension accessing, you are prompted to change the password. Note your new router admin username and password to utilise it later. Passwords cannot be recovered.
    • If the password is lost, follow
      reset the router
      above.
  4. If you’re still unable to access the admin pages,
    contact the states.

Tin can’t connect phone to router

  1. Turn off the phone.
  2. Wait five seconds, then turn on the phone.
  3. Try to
    connect your telephone to the router.
  4. If that didn’t work, follow
    reset the router
    above. Then endeavor reconnecting.
  5. Apply another phone or calculator to meet if other devices can connect (or are connected) to the network.
  6. If other devices can connect, the router is ok. The trouble is with device that wont connect. Check its settings and user manual.
  7. If no phones or computers tin connect,
    contact united states.

  1. Verify the following:
  2. If the answer to both questions above is yes, your router is fix up correctly. (If not,
    reset the modem and router
    in a higher place.)
  3. Load a web folio and run across if your speed has improved.
    • Internet speeds are determined past your Net provider (Isp). T-Mobile isn’t providing the service.
    • Contact your Internet provider (ISP) to study slow Cyberspace, if problems proceed.

No wireless network bachelor / not broadcasting Wi-Fi

Determine if network is gear up upward properly and wireless point is broadcasting from Wi-Fi CellSpot Router:

  1. Make sure the router is turned on. The
    Ability
    push button on the dorsum of the router must be pressed in.

  2. Are any of the router lights illuminated?
    • Yeah:
      Skip to step 5.
    • No:
      Motility to the next pace.
  3. If no lights are on, press the
    LED on/off
    push
    on the back of the router, and wait five seconds.
  4. Is the
    blue indicator calorie-free
    (looks like a earth, fifth from the right) illuminated?

    • Yes:
      Motion to the next step.
    • No:
      Follow
      router setup
      above.
  5. Are the blueish lights illuminated higher up the
    2.four GHz

    or
    5 GHz
    icons?

    • Aye:
      The router is broadcasting wireless betoken. Follow
      connect your phone to the router
      to a higher place.
    • No:
      Wi-Fi is turned off. Press the
      Wi-fi on/off
      button
      on the side of the router to turn on Wi-Fi.
  6. If y’all are still unable to locate your wireless network using a T-Mobile phone,
    contact us.

Attachments

Reset T-mobile Asus Router to Stock Firmware

You May Also Like