Redmi Note 4 Stuck on Boot Screen

Galaxy Note 4 is one of the most loved phablet of Galaxy Note series of Samsung. Note series is known for their stylus along with great battery life and big display screen. Note 4 is also known as one of the most successful phone of notes series. Galaxy Note 4 was adored by many. The reason behind it can be Galaxy S5 which was titinada much loved by the general users and Samsung customers. Whereas Galaxy S6 and S7 are exquisite phones and people are in love with both of them. Let’s move on the guide on how to
fix note 4 stuck Samsung logo at startup.

Note 4 has a 5.7-inch display screen
and its the first phone which was introduced with edge version. It has curved screen version that’s why it was so popular and it is still loved by many. Samsung stood above the competitors by introducing a curved screen phone with Note 4.

Note 4 has 3 GB ram along with Snapdragon 805 which gives it great processing power. and its battery is of 3220 mAh. It has external storage port and dalam storage memory is of 32 GB.

Note 4 stuck Samsung Logo at Startup:

While rooting or performing different tweaks on your phone you might come across a problem when your phone is in bootloop or you may call it note 4 stuck Samsung nama at startup. The following guide will deal with its solution:

Although the solution is quite simple, the only penyakit with it is that it willdelete all the data present in your phone. I hope you made a backup of your phone somewhere on your PC or cloud. If you don’t know how to make a backup. Use this guide to make a backup of your Note 4. So in future, you never lose your data or you never get locked out of your data. If you install exactly the same ROM as you are running right now on your phone, data won’t be deleted.

Well, the solution of note 4 stuck Samsung logo at startup is flashing stock firmware on your phone.
It will reinstall the operating system and your phone will be as good as new. Flashing stock ROM means reinstalling the Android operating system.

Now let us move on to the guide:

First of all, the following are some prerequisites that you will need to perform or download before proceeding.

• Download
  ODIN v3.10.7 from here.
• Download Stock
  Firmware
  for your Note 4
  from SamMobile. (Enter the model number of your phone, It will display all the stock ROM present for your phone)
• Download Samsung Drivers for Windows. (Link to download file is under the main heading).These drivers are to be installed on your PC, they are essential for your PC to recognise your device properly.
• Make sure your phone is charged up to 50%.

Before moving forward make sure KIES is not running on your computer even in the background.

Make sure you have the right ROM for your phone. If your phone is carrier unlocked and it is not branded you can use any carrier free (unbranded) ROM from the link above. Now how to check if your phone is branded or not. If the logo or any carrier appears when you start your phone then its branded, if only Samsung logo appears when you reboot your phone then it’s clean. Make sure you don’t flash unbranded ROM on a branded phone and vice versa.

• Download
  ODIN
  on your PC
• Install
  Samsung
  
  USB drivers
  
  
  for windows on your PC.
• Now turn off your Note 4 and Get it into Download mode. Press
  Volume Down, Power button
  and
  Home Button
  simultaneously. Keep on holding till you see a warning.
• Press
  Volume up
  button to continue.
• Now open ODIN on your Windows PC.
• Connect your Note 4 with your PC using an original Data cable.
• The
  ID:COM
  section will turn blue. Once your computer detects your phone.
• Click on
  AP
  or in some ODIN versions
  PDA .
• Select the stock ROM you
  downloaded.
• Make sure Only
  Auto Reboot
  and
  F. Reset Time
  are checked in the options. Like in the screenshot below.
• Click on Menginjak.

• Wait for a few minutes. Don’t disconnect your phone from your PC while ROM is flashing.
• Note: If the
  firmware
  you
  downloaded
  extracts more than one file then select the corresponding section according to file typeBL belongs to Bootloader, AP belongs to PDA, CP belongs to Phone(Modem) and select CSC file in CSC tab.

If flashing the firmware fails and you get this error “All threads completed.
(succeed 0 / failed 1)”. Then use some other version of ODIN. Or use this guide to fix the kelainan.

That’s all from my side. In conclusion, if you have any issues or queries regarding how to fix note 4 stuck Samsung segel at startup let derita know in the comments. Do give us feedback when you successfully flash stock ROM on your Note 4 and manage to fix it. Feel free to ask if you have any problem in the guide above. If you are still using Note 4 and happy with it, let us know what is keeping you from upgrading.