Through this postal service, you lot tin can download
Qualcomm HS-USB QDLoader 9008 Drivers
and install them on your PC. These drivers are
compatible with any Windows 7, 8, 8.one and 10 PC with 32-chip or 64-bit CPU architecture. You volition need to install these drivers in society for the PC to notice your Qualcomm phone or tablet in EDL (Emergency Download) mode.

Every mobile vendor releases the USB Drivers for their devices. These drivers are either come as a standalone executable application or pre-installed on the devices. Moreover, these drivers assistance in performing bones activities like transferring music, videos, pictures, documents, or for executing ADB and fastboot commands.

But the purpose of these
OEM USB drivers
is only applicable until your device is in a fully-working condition.

Table of Contents

Why and when you would need these drivers

If you flash an incompatible software on your device, at that place are high chances of getting your device bricked. In several such cases, flashing the stock firmware using fastboot or tools like
Odin,
Mi Flash,
Nokia OST LA,
LGUP, etc would not be possible. That’s because the normal USB drivers would not be able to recognize your Android device in one case it is connected to PC.

Only if your device is running a Qualcomm Snapdragon processor, and so there’s a chance you can download and
install the stock firmware using QPST tool
to recover your device from the bricked state. And for that, your device must be
booted into EDL way
and recognized as ‘Qualcomm HS-USB QDLoader 9008‘ past your Windows PC’s Device Manager.

Read:  Download Driver Ati Radeon Hd 5700 Series

So, if you desire to unbrick your device, y’all must first download the required Qualcomm USB drivers and install them on your PC. The instructions below will help you install these USB drivers on whatsoever Windows 10/eight.ane/8/seven PC with 32-bit or 64-scrap architecture.


Qualcomm HS-USB QDLoader 9008 Driver for Windows 32-bit/64-bit

Prerequisites

Follow the below points only if yous are going to install the Qualcomm HS-USB QDLoader 9008 Drivers via the ‘Transmission’ method. However, if you lot adopt to install the drivers using the ‘Straight Method’ and so y’all may skip this part.

  • Download and install the latest version of ADB and Fastboot tools. You could
    refer to our guide

    on how to download and install them.
  • Also, enable the ‘USB Debugging‘ (present under ‘Programmer Options’) on your device.
  • If you are running Windows 8 or afterwards versions, brand certain to turn off ‘Driver Signature Verification’ on your PC. This can be washed past inbound the ‘Test Manner’. To do so, follow the steps below:
    1. Open up Command Prompt on your PC
    2. Type in the following code in the CMD window:
      bcdedit /set testsigning on
    3. At present reboot your PC to enter Examination Mode
    4. After the installation process is over, you may go out the Test manner past inbound the below code:
      bcdedit /set testsigning off

Download Qualcomm HS-USB QDLoader 9008 Drivers

Make sure to download the USB Drivers as per the ‘Installation Method’ yous chose.

For Automatic and Straight Method:

For Manual Method:

How to Install Qualcomm HS-USB QDLoader 9008 Drivers?

The provided Qualcomm USB drivers could be installed on any 32-bit or 64-bit Windows PC via ii dissimilar methods. The first method follows an automatic and directly arroyo and lets you install the said drivers past simply using the setup wizard. This is the easiest and recommended way to install Qualcomm HS-USB QDLoader 9008 drivers on your PC.

Read:  Download Driver Hp Pavilion G4 Core I5 Ati Radeon

All the same, if the kickoff method fails for some reason, you can follow the 2d method that takes the transmission arroyo for the installation.

Method 1: Automated and Direct

  1. Download Qualcomm HS-USB QDLoader 9008 drivers corresponding to your PC’s CPU compages (32-scrap or 64-bit).
  2. Get to the directory where the file was downloaded.
  3. Double-click on the ‘QDLoader_HS-USB_Driver_xxbit_Setup.exe‘ executable file.
  4. Click on ‘Next‘ in the InstallShield Sorcerer that appears.

    Install Qualcomm HS-USB QDLoader 9008 Drivers - Direct Method - InstallShield Wizard
  5. Take the terms and conditions past selecting ‘I accept the terms in the license agreement‘ option.

    Install Qualcomm HS-USB QDLoader 9008 Drivers - Direct Method - Accept T&C
  6. Click ‘Adjacent‘ later on accepting the terms and weather condition.
  7. Now, click on the ‘Install‘ push to install Qualcomm HS-USB QDLoader 9008 drivers on your Windows PC.

    Install Qualcomm HS-USB QDLoader 9008 Drivers - Direct Method - Begin Installation
  8. One time the installation is completed, click on ‘Finish‘ to exit the InstallShield Wizard.

    Install Qualcomm HS-USB QDLoader 9008 Drivers - Direct Method - Installation Finished

That’s it! The Qualcomm Android USB drivers are now successfully installed on your PC.

Method ii: Manual

If the automated method does non work and your PC still doesn’t recognize your Android device, then yous should follow the manual method every bit listed below.

  1. Download the ‘Qualcomm-Driver.nil’ file.
  2. Extract the nothing file to a suitable location on your PC.
  3. Connect your Android device to PC via the USB cablevision.
  4. Navigate to the folder where ADB and Fastboot tools are installed.
  5. Press the SHIFT key and right-click on an empty area inside this folder.
  6. Select the ‘Open PowerShell window here‘ choice.

    Install Qualcomm HS-USB QDLoader 9008 Drivers - Manual Method - Open PowerShell
  7. Type the following code in the PowerShell window to reboot your Android device into EDL mode:
    adb reboot edl
  8. Note:
    On certain devices, but executing the above command to reboot into EDL mode might not piece of work. In such a example, you will demand to search online for a dedicated method for your specific Android device.
  9. Go to
    Command Panel
    >
    Device Manager
    on your Windows PC.
  10. You shall meet your Android device being detected equally ‘QHUSB_BULK‘ under the ‘Other Devices‘ tab, along with a yellow exclamation marking. This indicates that the PC is unable to recognize your device equally the USB drivers aren’t installed till at present.

    Install Qualcomm HS-USB QDLoader 9008 Drivers - Manual Method - Device detected as 'QHUSB_BULK'
  11. Right-click on it and select ‘Update Driver software‘.
  12. Click on ‘Scan my calculator for driver software‘ and select the folder that contains the USB driver files.

    Install Qualcomm HS-USB QDLoader 9008 Drivers - Manual Method - Update Driver Software
  13. Once the folder is selected, click on ‘Next‘.

    Install Qualcomm HS-USB QDLoader 9008 Drivers - Manual Method - Select Driver Folder
  14. Now you would see a Windows Security prompt on your PC’s screen.
  15. Only select ‘Install this driver software anyway‘ to confirm and install Qualcomm HS-USB QDLoader 9008 drivers on your PC.

    Install Qualcomm HS-USB QDLoader 9008 Drivers - Manual Method - Windows Security Prompt
  16. Later on the drivers are installed, your device should be recognized as ‘Qualcomm HS-USB QDLoader 9008‘ in the Device Manager.

    Android device detected as 'Qualcomm HS-USB QDLoader 9008' in Windows Device Manager
Read:  Download Driver Canon Mg2570 Windows 10 64 Bit

And so at that place you become! You accept simply been able to download Qualcomm HS-USB QDLoader 9008 drivers and as well learned how to install them using two different methods. You can now get ahead and unbrick your device by flashing the stock firmware using the QPST tool, while your Android device is in EDL mode.

With that said, if yous are having any query with respect to any part of this guide or you didn’t understand any of the installation steps, do ask usa in the comments section below.