Printer Canon E410 Tidak Bisa Narik Kertas
Maintenance
tab Description
The
Maintenance
tab allows you to perform
printer
maintenance or change the settings of the
printer.
-
Cleaning
-
Performs print head cleaning.
Print caput cleaning removes any blockage in the print head nozzles.
Perform cleaning when printing becomes faint, or a specific color fails to print, even though all ink levels are sufficiently loftier. -
Deep Cleaning
-
Performs deep cleaning.
Perform deep cleaning when two cleaning attempts do not resolve the print head problem.
Note-
Deep Cleaning
consumes a larger amount of ink than
Cleaning.
Cleaning the impress heads frequently volition rapidly deplete your printer’s ink supply.
Therefore, perform cleaning just when necessary.
-
-
Impress Head Alignment
-
Impress head alignment corrects the installation positions of the print head and improves deviated colors and lines.
Align the print head immediately later installing the print head.
When you click
Print Head Alignment, the
Start Print Head Alignment
dialog box
is displayed.
-
Nozzle Bank check
-
Prints a nozzle bank check pattern.
Perform this function if printing becomes faint or a specific color fails to impress.
Print a nozzle check design, and cheque whether the impress head is working properly.
If the print result for a specific color is fainted, or if there are whatsoever unprinted sections, click
Cleaning
to clean the impress head.
To display a list of items that you should cheque before printing the nozzle check design, click
Initial Cheque Items
.-
Print Cheque Pattern
-
This function prints a pattern that allows you to cheque whether the any of the ink nozzles are chock-full.
Click
Impress Check Design.
When the confirmation message is displayed, click
OK.
The
Pattern Check
dialog box is then displayed.- Left-side bitmap (skilful)
- The print head nozzles are not clogged.
- Right-side bitmap (bad)
- The impress head nozzles may be chock-full.
-
Exit
-
Closes the
Design Check
dialog box, and returns to the
Maintenance
tab. -
Cleaning
-
Performs print caput cleaning.
Print head cleaning removes whatsoever blockage in the impress head nozzles.
Perform cleaning when printing becomes faint, or if a specific color fails to print, even though all ink levels are sufficiently loftier.
-
-
Ink Cartridge Settings
-
Opens the
Ink Cartridge Settings
dialog box.
Employ this function to specify the
FINE cartridge
yous desire to use.
-
Lesser Plate Cleaning
-
Performs cleaning of the lesser plate of the
printer.
To prevent smudges on the dorsum side of a sheet of paper, perform
Bottom Plate Cleaning
before you perform duplex press.
Also perform
Bottom Plate Cleaning
if ink smudges caused by something other than print data appear on the printed folio. -
Roller Cleaning
-
Cleans the paper feed rollers.
Paper feeding may fail if paper dust has stuck to the printer’s paper feed rollers.
In this case, clean the paper feed rollers to amend the print outcome. -
Power Off
-
Turns off the printer from the printer driver.
Perform this office to turn off the
printer
when you cannot press the ON push (Power push button) on the printer because the
printer
is out of your achieve.
You must press the ON button (Ability push button) on the printer to turn the
printer
on once again after clicking this button.
When you employ this part, you will not be able to turn the printer on from the printer driver. -
Automobile Power
-
Opens the
Auto Power Settings
dialog box.
Specify settings for operating the
printer
power automatically.
Perform this function if you want to change the auto power settings.
Note-
If the
printer
is off or if communication between the
printer
and the computer is disabled, an error message may appear because the computer cannot collect the
printer
status.
If this happens, click
OK
to display the most contempo settings specified on your computer.
-
If the
-
Tranquillity Settings
-
Opens the
Tranquillity Settings
dialog box.
Placidity Settings
dialog box allows you to specify a setting that reduces the operating dissonance of the
printer.
This mode comes in handy when the operating racket of the
printer
becomes a business organization, such when printing at night.
Perform this operation when you desire to change the quiet manner setting.
Note-
If the
printer
is off or if communication between the
printer
and the estimator is disabled, an error message may appear because the computer cannot collect the
printer
status.
-
If the
-
Custom Settings
-
Opens the
Custom Settings
dialog box.
Perform this role to change the settings of this printer.
Note-
If the
printer
is off or if communication between the
printer
and the computer is disabled, an error message may announced because the figurer cannot collect the
printer
status.
If this happens, click
OK
to display the nearly recent settings specified on your computer.
-
If the
-
View Print History
-
This function starts the
Canon
IJ
XPS preview, and displays the print history.
Note- Yous can use this function simply with the XPS printer driver.
-
View Printer Status
-
Starts the
Canon
IJ
Status Monitor.
Perform this function when you want to check the printer status and how a print job is proceeding.
Note-
If you are using the XPS printer driver, the “Canon
IJ
Status Monitor” becomes the “Canon
IJ
XPS Condition Monitor”.
-
If you are using the XPS printer driver, the “Canon
-
About
-
Opens the
Nigh
dialog box.
The version of the printer driver, plus a copyright discover, can be checked.
In addition, the language to exist used tin can be switched.
Initial Check Items
(Cleaning
/
Deep Cleaning)
Earlier running
Cleaning
or
Deep Cleaning, check that the
printer
power is on, and open the cover of the
printer.
Cheque the following items for each ink.
-
Check the amount of ink
remaining in the cartridge. - Brand certain that you push in the ink cartridge completely until y’all hear a clicking sound.
-
If an orangish tape is adhered to the ink cartridge, pare it off completely.
Any remaining tape will hinder ink output. - Check that the ink cartridges are installed in their correct positions.
Beginning Print Head Alignment
dialog box
This dialog box allows you to suit the attachment position for the print head, or to print the current setting value for the print head position.
-
Align Print Head
-
Aligns the print head.
Print head alignment corrects the installation positions of the print head and improves deviated colors and lines.
Marshal the impress head immediately after installing the print head. -
Print Alignment Value
-
Click this push button to check the current setting value of the impress head position.
Prints the current setting value for the print head position.
Print Head Alignment
dialog box
To adjust the impress head position manually, click
Marshal Print Head
in the
Outset Print Caput Alignment
dialog box, and perform the operations instructed in the messages.
The
Print Head Alignment
dialog box is so displayed.
This dialog box allows you to cheque the printed pattern and suit the print head position.
- Preview Window
-
Displays the design of
Print Caput Alignment, and checks the position of the selected pattern.
You lot tin also modify the setting by clicking the pattern on the screen directly. - Select the Pattern Number
- Compare the printed aligning patterns, and enter the pattern number of the pattern with the least visible streaks or horizontal stripes into the respective box.
Note
-
If you exercise not know how to analyze the printed design, see
Adjusting Print Head Position.
Initial Check Items
(Nozzle Check)
Earlier running
Nozzle Check, check that the
printer
power is on, and open the cover of the
printer.
Check the following items for each ink.
-
Bank check the amount of ink
remaining in the cartridge. - Make sure that you push button in the ink cartridge completely until you hear a clicking sound.
-
If an orangish tape is adhered to the ink cartridge, peel information technology off completely.
Whatever remaining tape volition hinder ink output. - Cheque that the ink cartridges are installed in their right positions.
Ink Cartridge Settings
dialog box
When you lot click
Ink Cartridge Settings, the
Ink Cartridge Settings
dialog box is displayed.
This feature enables yous to specify the most appropriate
FINE cartridge
amid installed cartridges according to an intended utilise.
When ane of the
FINE cartridges
becomes empty and cannot be replaced immediately by a new i, you can specify the other
FINE cartridge
that nonetheless has ink and continue printing.
-
Ink Cartridge
-
Selects the
FINE cartridge
you use for press.-
Color Only
-
Uses the color
FINE cartridge
only. -
Black Only
-
Uses the black
FINE cartridge
only. -
Both Black and Color
-
Uses the
FINE cartridges
installed on the
printer, which are color and black.
Important-
When a setting other than
Plainly Newspaper
or
Envelope
is selected for
Media Blazon
on the
Main
tab,
Blackness Only
is disabled considering the
printer
uses the color
FINE cartridge
to impress documents. -
Do not detach the
FINE cartridge
that is not in utilise.
Printing cannot be performed while either
FINE cartridge
is detached.
-
Auto Power Settings
dialog box
When you click
Auto Power, the
Auto Power Settings
dialog box is displayed.
This dialog box allows you to manage the
printer
power from the printer driver.
-
Car Power On
-
Selects the auto power-on setting.
Specify
Disable
to forestall the
printer
from turning on automatically when print data is sent to it.
Make sure the printer is on and then click
OK
to change the
printer
settings.
Specify
Enable
to turn the
printer
on automatically when print data is sent to it. -
Auto Ability Off
-
Selects the auto power-off setting.
If a printer driver functioning or a
printer
performance is not performed within the specified fourth dimension, the
printer
turns off.
Tranquillity Settings
dialog box
When you click
Quiet Settings, the
Quiet Settings
dialog box is displayed.
Placidity Settings
dialog box allows you to specify a setting that reduces the operating racket of the
printer.
Select when you wish to reduce the operating noise of the
printer
at dark, etc.
Using this office may lower the print speed.
-
Exercise non use serenity way
-
Select this option when you wish to utilize the
printer
with volume of normal operating noise. -
Always use tranquility mode
-
Select this option when you lot wish to reduce the operating dissonance of the
printer. -
Use quiet mode during specified hours
-
Select this option when you wish to reduce the operating dissonance of the
printer
during a specified period of time.
Set the
Showtime time
and the
End fourth dimension
of the serenity mode you wish to be activated.
If both are set to the same time, the placidity mode will non function.
Important
-
You can set the tranquillity style from the
printer, the printer commuter, or
ScanGear
(scanner commuter).
No matter how yous utilize to gear up the quiet way, the mode is applied when you perform operations from the
printer
or printing and scanning from the computer. -
If you lot specify a time for
Use placidity style during specified hours, quiet way is non applied to operations (copy, direct print, etc.) performed directly from the
printer.
Custom Settings
dialog box
When you click
Custom Settings, the
Custom Settings
dialog box is displayed.
If necessary, switch betwixt diverse modes of
printer
operation.
-
Align heads manually
-
Usually, the
Print Head Alignment
function on the
Maintenance
tab is set to automated head alignment, only you tin can alter it to manual caput alignment.
If the printing results of automatic print head alignment are non satisfactory,
perform manual head alignment.
Bank check this check box to perform the transmission head alignment. -
Rotate 90 degrees left when orientation is [Mural]
-
On the
Page Setup
tab, yous can change the rotation direction of the
Mural
in the
Orientation.
To rotate the document 90 degrees to the left when press, select the check box.
Note-
If
Envelope Com 10, or
Envelope DL
is selected for
Page Size
on the
Page Setup
tab, the printer rotates the paper 90 degrees to the left to impress, regardless of the
Rotate 90 degrees left when orientation is [Landscape]
setting for
Custom Settings
on the
Maintenance
tab.
-
If
-
Ink Drying Await Fourth dimension
-
The
printer
can pause before printing a subsequent page.
Moving the slider to the right increases the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed folio dries, increase the ink drying await time.
Reducing the ink drying await time speeds upward press.
About
dialog box
When yous click
Well-nigh, the
About
dialog box is displayed.
This dialog box displays the version, copyright, and module listing of the printer driver.
You can select the language to be used and switch the language displayed in the setup window.
- Modules
- Lists the printer driver modules.
-
Language
-
Specifies the language you wish to employ in the
printer driver setup window.
Of import- If the font for displaying the language of your choice is not installed in your organisation, the characters will be garbled.