This error bulletin leads to this explanation:
“The firmware file is not present in the root folder of the USB storage device, or the firmware file is for another model. Retry from the download of the firmware file. “
Did you unzip/extract this firmware file to the root folder of the USB device?
https://world wide web.pioneerelectronics.com/PUSA/Home/AV-Receivers/Elite+Receivers/VSX-LX301#downloads
Follow the instructions mentioned in the advanced transmission :
1.Connect the USB storage device to your PC.
ii.Download the firmware file from our visitor’s website to your PC and unzip.
Firmware files are named in the post-obit style:
PIOAVR****_************.nil
Unzip the file on your PC. The number of unzipped files and folders varies depending on the model.
three.Copy all unzipped files and folders to the root folder of the USB storage device.
Make sure to copy the unzipped files.
iv.Connect the USB storage device to the USB port of the unit.
If you connect a USB hard disk drive drive to the USB port of the unit, nosotros recommend that you utilise its AC adapter to power it.
If the USB storage device has been partitioned, each section volition be treated every bit an independent device.
5.Press on the remote controller.
The Home screen is displayed on the TV screen.
6.Select “System Setup” – “Miscellaneous” – “Firmware Update” – “Update via USB” with the cursors in club, and then press ENTER.
If “Firmware Update” is grayed out and cannot be selected, look for a while until information technology starts upwards.
You lot will not be able to select “Update via USB” if in that location is nothing to update.
7.Press ENTER with “Update” selected to start update.
During the update, the TV screen may become black depending on the updated program. In that case, cheque the progress on the display of the unit. The Tv screen will remain black until the update is complete and the power is turned on once again.
During the update, do not turn off, or disconnect and so reconnect the USB storage device.
“Completed!” is displayed when the update is complete.
eight.Disconnect the USB storage device from the unit.
9.Press STANDBY/ON on the chief unit to switch the unit to standby. The procedure is completed and your firmware is updated to the latest version.
Do non use on the remote controller.