New Firmware Problems in H96 Pro Plus

Steps to Install Stock Firmware on H96 Max Plus Tv set Box

Now, before nosotros become straight to the Steps to Install Stock Firmware for H96 Max Plus Goggle box Box, let usa have a look at some of the prerequisites.

Prerequisites

• Please note that this guide volition work only with the H96 Max Plus Tv Box.
• You should have a formatted SD Card for this guide.
• DownloadRockchip Batch Tool v1.8
• DownloadRockchip Driver Assistant v4.

Once yous take the above prerequisites, y’all can proceed to Instructions to Install H96 Max Plus Television receiver Box Stock ROM.

Instructions to Install:

Here are the instructions you need to follow in society to install Stock Firmware on H96 Max Plus TV Box :

How to Install the Firmware Update on Android TV Box with Rockchip SoC

In this mail service, nosotros will tell you
how to install the firmware update on Android TV Box
 that runs on the Rockchip processor. There are diverse ways to do it. You lot tin can utilize some specified tools to perform this installation. Also, you tin can flash the firmware using a single micro SD card. There is some other fashion where you lot have to make use of the figurer along with the wink tool.

How To Install Firmware update on Android TV Box

There are various ways to do it and we will cover each of that.

Flash Firmware With IMG File And A SD Menu

Earlier beginning, make sure that you lot have an idea about what modifications yous are doing. Follow the steps carefully.

Note: GetDroidTips will non be responsible for any bricked devices.

In this method, nosotros have a single file with.img extension that we need to flash and nosotros don’t need to connect the TV-Box to a PC.

Requirements

•  Download drivers
  Rockchip create upgrade deejay tool v1.4
  
• A PC/Laptop
• MicroSD or SD card reader
• SD card formatted in FAT32
• If the method does not piece of work with 1 card endeavour another one
• You always accept to run the programme equally Ambassador

Preparing the SD card to update TV-Box with SoC Rockchip

1. Unzip the Rockchip Create Upgrade file
2. Locate where you lot have the firmware file in * .img format
3. Nosotros offset the Rockchip Create Upgrade program as theADMINISTRATOR (correct-click on “SD_Firmware_Tool.exe”)
   In the program we select:
   – Drive where we have continued the SD card
   – Activate theSD BOOT option in the programme card
   – The path where we have the IMG file
4. Printing theRESTORE button and the process of creating the SD carte du jour will start, it may take several minutes.
5. With the Television receiver-Box turned off to innovate the SD carte du jour.
6. Go along the reset button pressed and without releasing it we connect the Tv-Box to the electricity to kicking it.
7. Automatically the update procedure will start and we take to await as it finishes.
8. To the final, the process removes the SD menu.
9. We recommend doing a manufactory reset when Android boot: Settings> Backup> Reset.

FLASH FIRMWARE WITH IMG FILE USING A PC

In this process, we have a single file with.img extension and in this case, you need to connect the TV-Box to a PC.

Requirements

• Download
  Driver Rockchip Commuter Assistant v4.4
  
  
• Download Rockchip
  RK Batch Tool v1.8 Update Tool
  ,
  
• A PC/Laptop
• MicroUSB cable

Connexion to TV

• Each Boob tube-Box has a specific PC connection port.
  
  So, you have to test the flash process with all ports, USB, micro USB or USB Type-C.
• If your PC does not observe the TV-Box nosotros recommend using another PC.
• You may take problems with PC if you accept previously installed another program to update an Android mobile phone or other similar devices.

Installing Rockchip Drivers

1. Start the program for the Rockchip Drivers “driverinstall.exe” (execute like Administrator with the right button of the mouse in Windows), press in
   Install
   
   
2. In the Windows security message click onInstall
3. Close the Drivers plan
4. Reboot the PC.

Update Procedure for a Television receiver-Box withRK Batch Tool

1. 1. Disconnect the power cord on theRockchip Television receiver-Box
   2. Kickoff the plan
      RK Batch Tool
       with the “RKBatchTool.exe“
   3. Click on the Firmware button “…”
   4. Select the Firmware file with the extension “.
      img “and will be loaded on the screen.
   5. Concur the reset push button on the device and connect with a cable from a USB of our Tv-Box to a USB port on our PC (* See the previous connection notes if nosotros have questions)
   6. The update programme volition detect the device almost instantly in one USB position (In the Television set-Box we volition have the black screen if it enters the recovery is Not correct)
   7. Select the RESTORE selection and begin the update process.
   8. When finished, a greenish bulletin volition appear.
   9. Look for the system to restart and show us the Android desktop, this can take about 5 to 10 minutes.

Update using a PC for TV-Box with Manufactory Tool

1. Disconnect the Rockchip device from the power and run
   Factory tool
   
2. Outset, we upload the firmware in IMG format and change to Restore mode.
3. Hold the reset button on the device and connect with a cable from a USB of our Television set-Box to a USB port on our PC.
4. The update program will observe the device almost instantly in one USB position
5. Click on the RUN push button, at the end, it will give us OK.
6. Wait for the system to restart and bear witness usa the Android desktop, this tin can have from five to x minutes approximately.

Update using a PC for TV-Box with RKDevTool

1. Disconnect the Rockchip device from the power and run
   RKDevtoolexecutingAndroidTool.exe.
2. Modify to theUpgrade Firmware section.
3. Kickoff, browse and select the firmware with*.img file.
4. Concur the reset button on the device and connect with a cablevision from a USB of our Boob tube-Box to a USB port on our PC
5. The update programme will detect the device (In the TV-Box we will see the black screen if it enters the recovery is NOT correct).
6. Pressthe Upgrade button and await as the update takes place..

Update Only With Zip File

In the final method, we have a single file withthe .zip extension and there is no need of connecting the Tv set-Box to a PC.

Steps

• Copy in the root of our SD or USB the .zip file of the update (depends on the TV-Box one or the other is used, try both)
• From the Android system of our TV-Box, we go to Settings, depending on the model we have one choice or some other, examples:
  – Awarding update in the list of apps
  – Settings> Near the device> Update
  – Some Television-Box with the Goose egg in the root of the SD or USB with the flash button pressed when starting to take the update
• When you ask for the cypher file, nosotros select it and click on load
• The update procedure will brainstorm on the restart.
• One time finished nosotros recommend doing a factory reset within Settings> Backup.

So, these were all the various methods that you lot tin utilize to install the firmware update on Android Tv set Box. Nosotros hope this guide was helpful to you.