Motorola Motoz2 Force Wi-fi Drivers Snd Firmware Update
1. Download this official AT&T Oreo firmware to your computer
https://androidfilehost.com/?fid=673956719939833410
Firmware above should match this version which is the latest AT&T firmware.
https://www.att.com/devicehowto/tut…?make=Motorola&model=MotoZ2XT1789&gsi=N8TH4fU
2. Download Lenovo Moto Smart Assist
https://support.lenovo.com/us/en/downloads/ds101291
3. Enable USB Debugging on your device commonly via settings on your phone and y’all press on About > Build numerous times until information technology states Programmer settings enabled then yous enable ADB USB Debugging at that place.
https://www.verizonwireless.com/back up/knowledge-base-213471/
4. rename the zilch firmware y’all downloaded in step one to
update.zip
and place it in the top level of your internal storage of your device from within Windows Explorer y’all will need to set your phone to USB file transfer mode instead of charging (the default) by pulling the notification area down on your phone and setting the USB style at that place.
5. After that is done unplug the USB cablevision from your PC and plug it back in once again.
half-dozen. Open the Lenovo Moto Smart Help in Windows become to Wink it will look for updates and immediately the Update push will be enable because you have an
update.nil
on your phone. Click Update, permit information technology finish rebooting your telephone and whatnot and viola welcome to Android Oreo on your Moto Z2.
==> DO Not POWER OFF YOUR DEVICE DURING Wink ==<
Since you my terminate up with a soft bricked device and will have to find methods on XDA to restore information technology, but you should be able to exercise this directly from fastboot.
-
Brainstorm by pressing the Ability push for a few moments to plow off
the Moto Z device
- In the next step agree downward Volume Down and Power keys for a brusque while.
- Let become of all keys when you lot see Fastboot Fashion.
One time your in fastboot just repeat the steps higher up.
Note: You lot will become some security & permission prompts if it is the showtime fourth dimension using Smart Assist. Practise what it states.
If your device is not detected you might need Motorola Drivers here
https://mega.nz/#!buYjzAaR!3Xx0MHYJqIJ8JjdSKxRaEP4AkifzUd3XX8dXKuTVZ1I
or hither via MDM (Motorola Device Director)
https://support.motorola.com/us/en/drivers
I establish this out after numerous attempts with AT&T sim cards and trying to allow the update happen in the Lenovo Moto Smart Aid but there was no progress indicator and sometimes the download would fail..but this worked for me.
To update to Oreo without an active AT&T sim.
2. Download Lenovo Moto Smart Assist
https://support.lenovo.com/us/en/downloads/ds101291
Thanks for this.
I but did the update with the tool higher up. The tool really offers you the option to download the latest OCXS27.109-47-14 image. Though it’s nevertheless the September 1, 2018 security updated epitome.
Equally instructed, y’all just install the software and accept permissions.
Click on “Flash”
In the Flash section, under “New Ver:” at that place is an option to download the latest. What it will practise is download the image and unzip information technology.
One time the prototype is ready, yous can Click “Update” and follow the instructions.
If you use the default settings for install, there is a log file you tin use to watch detailed progress. “C:\Plan Files (x86)\Lenovo Moto Smart Assistant\logs”
Be patient at 51% it’s likely copying the files during this time.
Is at that place an option to upgrade without windows pc? Via fastboot and such
The smart assistance tool installs fastboot during the update procedure and it goes into the bootloader screen when it performs the update. So as long as it’southward the official image, there might be a mode. I’m not certain, I did the update with my windows vm.
The smart aid tool installs fastboot during the update process and information technology goes into the bootloader screen when it performs the update. Then as long every bit it’south the official epitome, there might be a way. I’m not sure, I did the update with my windows vm.
I am thinking the smart assist has privileged access to flash via security keys considering when I tried flashing via fastboot or even from recovery via the goose egg file I did not have permissions, at least that’s what happened to me.
Anyone used LMSA to get the Jan 2019 update? LMSA shows Nov 2018 is the latest update.
I did successfully updated mt at&t z2 force to Jan 2019 security update. I could non make the transmission method work for me, only LMSA already lists the January 2019 patch. All y’all demand to do is install motorola drivers and LMSA, allow USB debugging and connect your phone to your figurer. So let LMSA recognize the phone and information technology will bear witness latest update. Download it directly in LMSA, and the Upgrade push volition go available.
Similar threads
