Turn off your Samsung device. Will be in tarmd5 format Now Click the Start button at the bottom of the ODIN screen to start the process.
Whether it is PDA or AP depends on the version of Odin that you used.
How to use odin to flash. Launch the Odin tool on your PC. Select the file that says BL in it. Odin3_v3131 or Odin 3127 for Android 800 Oreo files LZ4 use Odin 3131 for Android 70 and lower use Odin 3127 Step 3.
This method is for those users who cant use Odin Kies or Smart Switch and has a defective USB. Only certain Devices use this feature and this should not be used unless Instructed to do so by a knowledgeable person. Follow these steps to boot your device into Download Mode Odin Mode.
In order to flash stock or custom ROM to a Samsung device you must have the Samsung Firmware which is available on the internet for free for all Samsung brand device and can be easily downloaded on your computer for any specific model. Next click on the AP button in Odin and choose the AP file inside your extracted firmware folder. When the phone vibrates leave the power Key but keep on holding the Volume Down Key and Home key.
Press and hold Volume UP Power Home button at the same time. But the md5 file goes to either PDA or AP. After the flashing is complete device will reboot automatically.
T Flash option in odin is for Samsung boot recovery via sd card. Make sure the files you want to flash are downloaded on your. Video Tutorial how to flash with odin HERE Step 1.
After adding the file click Start to begin the flashing process. Download and install device driver software on your computer. Then further you can consume Odin tool to flash those firmware on your Samsung phones.
Click on the icon and select the Flash firmware package option. Click on the CP button choose the CP file inside your extracted firmware folder. Download and extract the stock firmware according to your model Step 4.
From the ODIN Window click on the button that says BL and then navigate to the Stock ROM that you must have downloaded by now. Navigate to the downloaded firmwaretarmd5 file and select it. You should then see the IDCOM section being highlighted indicating that the device has been recognized by your PC.
At last tap on Flash to begin the installation process. How to use Odin to Flash Stock Firmware Recovery and CF-Auto Root. After that choose AP in Odin and select the firmware file in which you have downloaded.
Download the Odin software from the above links. Easiest Way to Flash Samsung Galaxy S7S7 Edge using ODIN Flash Tool on PC. Head back to the Odin application.
Run Odinexe file on your Windows PC Now you will see Odin ID. Click Start button to start flashing process Click on the Start button on Samsung Odin or preferred software to begin the flashing process. Install Samsung Firmware with TWRP Recovery.
Launch the ODIN Flash Tool on your PC. Run Odin as administrator on PC. Click on the BL button then choose the file that starts with BL inside your extracted firmware folder.
Download the required files it may be either CF-Auto Root or Recovery or Firmware files. Download Odin Latest Version. Download and extract the latest version of the Odin Tool Download and Install Samsung USB Driver on your Computer.
This option will tell the software to unlock the Odin flash lock on the Device to allow the Device to be programmed. This option is checked. Download the latest version of Odin Downloader or the one supported by the device and firmware.
COM turned Blue that means your device is added successfully Your device is ready to go under flashing process Click on PDA in Odin browse the extracted firmware folder to select the file withmd5. Download and install Samsung USB Driver on your Computer If installed already then Skip this step. Then simply connect the phone to your PC via the use of USB cable and the ODIN would notify an added message.
Download Samsung Stock ROM of your device that you want to flash. Odin flash tool aka Odin Downloader is a Samsung firmware flashing tool for Windows OS. Now click on the AP button and load the Combination firmware that you have created.
With your Samsung device booted to Download Mode connect it to your PC via USB. How to use Odin Flash Tool to Flash Stock ROM and other files. It will take a while depending on the combination file size.
Add md5 to Odin. Besides you can even use Odin to unroot unbrick and restore default factory settings on your Samsung phone. It is used to manually update the Samsung Galaxy device using Official Stock firmware.
Wait for the process to complete flashing process successfully.