How to Upgrade Dji Mavic Pro Battery Firmware

Today you volition learn how to update the firmware on a Mavic two. Our DJI Mavic 2 Firmware Update Guide covers both the
Mavic 2 Pro
and the
Mavic 2 Zoom. To ensure the process is every bit painless as possible just follow the steps we outline below. If you lot accept questions regarding our Mavic two Firmware Update Guide, don’t hesitate to reach out in the comments!

Mavic ii Firmware Update Video

If you prefer to acquire the unlike ways to update the Mavic 2 Firmware, as well equally figure out when the best time to update check out our Video:

UPDATE two:

What’s New in v01.00.03.00:

1. Fixed the camera live view and so it does non become blurry when using a colour contour, i.e. D-Log, B&W, etc.
2. Added Waypoints (requires DJI GO 4 v4.iii.12 or later).
3. Enabled Lateral Vision Systems for Timelapse (run across Mavic 2 Pro/Zoom User Manual for more data about obstacle sensing).
4. Increased the altitude accuracy of Waypoints in Hyperlapse. When using Task Library to repeat a flying, make sure the takeoff distance is the same.
5. Fixed issues:
   1. The remote controller’s operating time was shortened when used with some mobile devices.
   2. You could non open Sphere panorama photos in Facebook.
   3. The Intelligent Flight Bombardment could non be charged when the environment temperature was between 5° and ten° C.

Update:

Previous Firmware versions:

What’s New
in v01.00.00.00 – v01.00.02.00:
Official Release Notes Here.

Steps to update the Mavic 2 Firmware via DJI GO four in App Update:

Before yous get started with updating the firmware on your Mavic 2 Pro or Mavic 2 Zoom, you tin have extra precautions, past removing the propellers before the update, and ensuring that your batteries are charged. The removal of the batteries reduces the adventure of the motors, spinning upwards accidentally and causing havoc on your desk-bound :). Also be sure that the gimbal clench is removed and that all legs of the drone are unfolded. Alright, permit’due south go to that update!

1. Download the latest version of the DJI GO App on the Apple or Google Play App Shop.
2. Launch DJI GO App.
3. Ensure you lot have at to the lowest degree fifty% battery in your Mavic two and remote command battery.
4. On the Home Screen of the DJI GO 4 App you should get an Update Available pop-up once the drone is turned on.
   1. If this doesn’t occur click the Photographic camera Push to launch the Camera View.
   2. Tap the acme condition bar in superlative heart of the screen.
   3. Under Overall Condition information technology should now say Update available/required.
   4. Tap Update.

*If you have issues with the Update run across the section titled “If you accept Issues” department below.

How do I figure out which version the Mavic 2 aircraft, remote control or DJI GO App I accept?

If yous are wondering what version of the DJI Become 4 App you take on your smartphone or if y’all just want to know which version of the Mavic 2 Firmware you have on your Mavic 2 Pro or Mavic ii Zoom, you can follow these steps to find that out.

1. In the DJI Become App launch the Camera View.
2. Tap the pinnacle right Carte icon (…)
3. On the popped up Bill of fare tap the three dots (…) on the left bottom menubar.
4. Gyre down to “About”.
5. Tap About.
6. Encounter App Version, Aircraft Version, RC Version.

If yous have Problems with the DJI Become 4 In-App Update:

You lot may get the occassional error while trying to update. This can of form be caused by a variety of reasons. Yous can endeavor the post-obit steps to attempt and alleviate the issue or utilise the DJI Assistant ii Program on a PC or Mac to update your Mavic 2. Nosotros cover those steps also in a bit below.

1. Plough off the Mavic 2 and the remote control.
2. Delete the DJI GO 4 App off of your smartphone.
3. Reinstall the DJI GO 4 App through the Appstore.
4. Restart the Firmware Update in the DJI GO App.
5. After 100% complete, power cycle the Mavic 2 over again and also power bike the remote control.

Steps to update the Mavic 2 Pro or Mavic 2 Zoom Firmware with the DJI Assistant ii:
Preferred Method*

Our preferred method of updating our Mavic ii Pro. Of grade, this also works for the Zoom. You lot tin select which firmware version y’all want to update to while using the Banana 2. Follow these steps to update your Mavic 2 with the Banana.

1. Ensure the Mavic ii bombardment is at minimum 50% charged.
2. Ensure the PC or Mac y’all will utilize for the upgrade is continued to the internet.
3. Download the DJI Banana 2 Software from
   DJI
   Here
   
   
   
   
   
4. Connect the aircraft to a PC or Mac via the supplied USB-C cable.
   1. Plug the USB-C plug into the USB-C port located on the right side of the drone merely behind the correct intake vent of the Mavic 2.
   2. Plug the USB part of the cablevision into your PC or Mac.
5. Launch the DJI Assistant 2 App on the PC.
6. Click Login on the top right of the App.
7. Login with your DJI Account. If you don’t take one create one using the Sign Upwards push.
8. Select & Click Mavic ii on the left side of the Screen.
   
9. Click Upgrade for the available Firmware Packages on the right side of the Screen. If there is more than than i update available, you can choose which version you want to install. You are able to skip updates if you just desire to update to the latest firmware version.
10. Click Starting time Upgrade.
11. Wait for the firmware bundle to download onto your figurer
12. The Upgrade of your Mavic ii’due south firmware volition starting time later the download is complete.
13. A few notes well-nigh the Mavic 2 firmware update procedure:
    1. It takes around 10-15 minutes.
    2. The Mavic ii will not Beep, it may restart on its own, and so y’all may hear the start-up chinkle.
    3. Don’t worry if y’all hear the internal fan power-on. This is normal.
    4. DoNot Remove the USB cablevision during the update.
    5. It’s normal for the gimbal to move on it’s own. Be certain that the gimbal clamp is off and nothing obscructs it’s total move abilities.
    6. The indicators and condition LED’s may flash abnormally.
    7. The aircraft may reboot on its own.
14. Reboot the Mavic two Pro/Zoom afterwards the firmware update is complete.
15. Check IMU Values in the DJI Go App.

Of import Steps after a Firmware Update on your Mavic 2:

Launch the DJI Go App while everything is connected (only the Remote Control linked to the drone, no more USB cables). Ensure your settings for Return-to-Home way are right. Go through any settings that you lot may take changed before and ensure they are set to your liking. You tin can test out the camera while you are at it.

Updating extra Batteries for your Mavic 2 Pro or Mavic 2 Zoom

Note that in that location may also be an update bachelor for your Mavic two’southward batteries. The battery in the drone at the fourth dimension of the update will get updated while doing the normal drone firmware update. If you have extra batteries and they are non updated yet, y’all will get the annoying “inconsistent firmware update found” mistake when you pop those batteries in and you are trying to go for a drone flight. To avoid these errors in the field exist sure to pop each battery into the drone once the drone and remote control are updated. Sometimes it takes a second for the message to pop up.

How to update the Mavic 2 Remote Control

Updating the remote command uses a similar procedure every bit updating the drone, using the in-App (DJI GO 4) method, it will ask you lot to update the remote or the drone and then it will update the other. Using the
DJI Banana two you simply attach the Mavic 2 remote control to your figurer using a USB-A to a microUSB cable and attach the microUSB cablevision on the left side of the remote control. Simply remove the normal cablevision that attaches to your smartphone and plug the cable which you will connect to the calculator in instead. Once you launch the Assistant 2 you lot will choose the Remote Control like this:

Exercise you have problems updating your Mavic 2 Pro or Mavic 2 Zoom?

Sometimes things to piece of work out as yous may plan, if you are having bug updating your Mavic 2 using either the DJI GO 4 App or even using the DJI Assistant 2, and then allow united states of america know in the comments below!

STAY IN Affect!

If you lot’d like to stay up to appointment with all the latest drone/gimbal news, rumors, and reviews, and then follow united states of america on
YouTube,
Twitter
,
Facebook
,
Instagram
 or sign up for oure-mail newsletter.

Purchase your next drone directly from
DJI
 or retailers like
Amazon
. By using our links, we will brand a small commission, at no cost to yous. Cheers for helping QuadcopterGuide grow!