How to Update Netgear Firmware on a Wireless Access Point
Objective
New firmware releases are improvements from previous firmware versions. Network device performance can exist enhanced when an upgrade is made. Firmware files can be downloaded through:
- Footling File Transfer Protocol (TFTP) – is a User Datagram Protocol (UDP) file transfer protocol typically used to distribute software upgrades and configuration files. When using the TFTP client, the file volition be downloaded from a TFTP server.
- Hypertext Transfer Protocol/with Secure Sockets (HTTP/HTTPS) – these protocols use your web browser to transfer the file.
This document explains how to upgrade the firmware on a Wireless Access Bespeak (WAP) through an
HTTP/HTTPS client
or
TFTP server.
Tip:
When you lot are upgrading the firmware, it is recommended to employ wired Internet connection on your calculator to avoid interruption during the upgrade procedure.
Applicative Devices | Firmware Version
- WAP121 | 1.0.6.5 (Download latest)
- WAP131 | 1.0.ii.8 (Download latest)
- WAP150 | 1.0.1.seven (Download latest)
- WAP321 | 1.0.6.5 (Download latest)
- WAP351 | 1.0.two.8 (Download latest)
- WAP361 | 1.0.1.7 (Download latest)
- WAP371 | one.iii.0.iii (Download latest)
- WAP551 | 1.2.1.3 (Download latest)
- WAP561 | ane.2.one.3 (Download latest)
Upgrade Firmware
Earlier starting the upgrade process, brand sure you have downloaded the latest firmware of your device from the Cisco website using the advisable link above.
Firmware Upgrade through HTTP/HTTPS
Notation: Images used are from the WAP131 equally an example.
Step 1. Login to the access point Graphical User Interface (GUI) and choose
Administration > Manage Firmware.
Step 2. Nether the Manage Firmware area, cull the
HTTP/HTTPS
radio button as the Transfer Method.
Note:
The Product ID (PID VID) and active and inactive firmware versions appear. When the firmware is upgraded, the previous version is saved as Inactive Firmware Version. These firmware versions are stored on the device so the active firmware tin be swapped at any time.
Stride 3. Click
Choose File
and locate the firmware paradigm file yous have previously downloaded.
Note: The firmware upgrade file supplied must be a .tar file. Do not attempt to use .bin or other file formats for the upgrade equally these types of files practice not work. The file name cannot contain the post-obit characters: spaces, and special characters.
Stride 4. Click
Upgrade.
Note: Uploading the new firmware may take several minutes. Do not refresh the page or navigate to another page while uploading the new firmware, otherwise, the firmware upload is aborted. Once the process is complete, the WAP restarts and resumes normal operation. In certain cases, you will demand to manually refresh the folio later the upgrade is completed. If the login page does non appear after six minutes, refresh your web browser.
Step 5. Click
OK
to go along.
Stride 6. The progress of the upgrade process will and then appear.
Pace 7. To verify if the firmware upgrade was successful, log in to the web-based utility and choose
Administration > Manage Firmware.
Under the Manage Firmware area, you will see the active image in the Active Firmware Version.
You take now successfully upgraded your firmware through HTTP/HTTPS.
Firmware Upgrade through TFTP
Step 1. Login to the access point web-based utility and choose
Administration > Manage Firmware.
Pace 2. Click the
TFTP
radio button every bit the Transfer Method.
Footstep 3. Enter the source file proper name in the
Source File Proper noun
field. The character limit is 1 to 256, including the path to directory that contains the image.
Annotation: The firmware upgrade file supplied must be a .tar file. Do not endeavor to use .bin files or files of other formats for the upgrade; these types of files practice non work. The filename cannot incorporate the following characters: spaces, and special characters.
Step 4. Enter the TFTP Server IPv4 Accost in the
TFTP Server IPv4 Address
field.
Note:
The IP address of 192.168.one.2 is used every bit an example below.
Step 5. Click
Upgrade.
Annotation: Uploading the new firmware may take several minutes. Practice non refresh the page or navigate to another page while uploading the new firmware, otherwise, the firmware upload is aborted. In one case the procedure is consummate, the WAP restarts and resumes normal operation. In certain cases, you will demand to manually refresh the page subsequently the upgrade is completed. If the login page does not announced after vi minutes, refresh your web browser.
Step six. Click
OK
to go on.
Step 7. The progress of the upgrade process will then appear.
Footstep eight. To verify if the firmware upgrade was successful, log in to the web-based utility and cull
Assistants > Manage Firmware.
Under the Manage Firmware expanse, you lot will see the agile prototype in the Active Firmware Version.
You have now successfully upgraded your firmware through a TFTP server.
For more information on updating firmware on a WAP, check out the post-obit aritcles:
