How to Update Flashforge Creator Pro Firmware
Flashforge–Ivan Chen
belum dibaca,
five Sep 2015 15.44.06
05/09/xv
kepadaFlashForge
Flashforge
Create a Joyful Life with You!
Corresponding Links:
Downloads For Creator&CreatorII(Firmware):http://world wide web.ff3dp.com/index.php/download-for-creator?tab=0
Meliorate 3D, Improve Life!
I hope all of you hither together with Flashforge!
Pesan telah dihapus
Flashforge–Ivan Chen
belum dibaca,
5 Sep 2015 15.51.fourteen
05/09/15
kepadaFlashForge
Notification on Software Upgrades
The upgrades in
FlashPrint_3.
4
.
1
1.
Flashforge Guider is added into the auto type choice.
2.
Joint handling is added while slicing for the smoothness of articulation.
three.
The possibility of software crash or lag is eliminated when transferring files through WIFI in Linux or Mac.
4. Some piece errors are corrected to avoid unnecessary fill path.
5. The problem that the model file with special characters in
file-name
cannot be loaded is solved.
6. Other bug modifications and function optimization.
Pesan telah dihapus
Pesan telah dihapus
Pesan telah dihapus
Happyman
belum dibaca,
6 Sep 2015 03.fourteen.17
06/09/15
kepadaFlashForge
will this work with the erstwhile version dreamer with clock on the display?
Jetguy
belum dibaca,
half dozen Sep 2015 03.24.42
06/09/15
kepadaFlashForge
Software works on any version- it’s merely a slicer.FlashPrint_3.
iv
.
1
Just don’t update the firmware by the March update.
Flashforge–Ivan Chen
belum dibaca,
half-dozen Sep 2015 07.25.39
06/09/15
kepadaFlashForge
Yes,definitely.If you choose Dreamer in Machine Blazon selection, and then all will be the same as before. In add-on, the firmware has been included in the Flashprint software.
在 2015年9月6日星期日 UTC+8上午4:24:42,Jetguy写道:
Happyman
belum dibaca,
6 Sep 2015 15.08.24
06/09/fifteen
kepadaFlashForge
Thanks Jetguy for the respond. They should clearly indicate firmware compatibility or implement firmware cross check with the mainboard version earlier process with installation if they plan not to support the 1st version Dreamer anymore.
Neoteric- Perry C
belum dibaca,
eight Sep 2015 20.13.36
08/09/xv
kepadaFlashForge
Why would flashforge mail a firmware for the Pro that is 3 years sometime?
zhoubo
belum dibaca,
9 Sep 2015 15.47.37
09/09/xv
kepadaFlashForge
Information technology’s better if you guys can post the workable sailfish 7.seven firmware for Creator Pro.
Gregory Sullivan
belum dibaca,
ix Sep 2015 18.31.19
09/09/fifteen
kepadaFlashForge
The designed obsolescence game perhaps?
Flashforge–Ivan Chen
belum dibaca,
ten Sep 2015 fifteen.45.11
x/09/15
kepadaFlashForge
Hi,
The firmware of Creator Pro is open up source. The open source community didn’t update the firmware. Then it is not updated on our page.
在 2015年9月8日星期二 UTC+8下午9:xiii:36,Neoteric- Perry C写道:
Tim Hawkins
belum dibaca,
10 Sep 2015 20.03.48
10/09/15
kepadaFlashForge
robosmith
belum dibaca,
xi Sep 2015 01.59.07
11/09/15
kepadaFlashForge
Is the Creator 10 firmware the same every bit Creator Pro?
Flashforge–Ivan Chen
belum dibaca,
xvi Sep 2015 12.25.29
16/09/15
kepadaFlashForge
Yes,definitely
在 2015年9月11日星期五 UTC+8上午2:59:07,robosmith写道:
Marker Walker
belum dibaca,
24 Sep 2015 thirteen.xix.14
24/09/fifteen
kepadaFlashForge
There’s a problem with the download links to ReplicatorG. Information technology lists it as being 42Mb compressed, but it is only 7Mb and as far as I tin tell, doesn’t actually include ReplicatorG simply the docs, drivers and examples folders.
You should probably likewise update to the latest available versions from thingiverse, but even declining that, I don’t recollect the download includes what you intended.
Rotorbaru
belum dibaca,
11 Okt 2015 xx.12.59
xi/10/15
kepadaFlashForge
To FF,
The latest firmware for the Dreamer has changes to the wifi protocol aimed at improving data transfer robustness. I found the consequence is the opposite as I tin can not successfully transfer any file to the dreamer wirelessly. The file transfer starts at nigh 25 kbps but always fails before it completes the transfer. Previous to this firmware change it would transfer at ~60kbps and was successfull ~90% of the fourth dimension unless it was a huge file. I can connect to the Dreamer w/o problems to monitor my print and access the control console but the impress transfers ever fail.
I recommend revisiting the wifi changes in the firmware as it was not an improvement to my machines wifi operation.
Janet Fouts
belum dibaca,
iii Nov 2015 04.18.27
03/eleven/xv
kepadaFlashForge
The link for the creator pro bounces to the habitation page. After reading this thread I’chiliad non sure I desire to upgrade nonetheless anyway? Is there a changelog?
Benofkent Props
belum dibaca,
7 November 2015 07.34.48
07/11/15
kepadaFlashForge
It seems the latest version has broken the support from being included in the g file as if I had forgotten to assign a nozzle? Very odd…
Merle Fyshwick
belum dibaca,
18 Nov 2015 12.31.00
18/11/xv
kepadaFlashForge
Dear Ivan
I upgraded FlashPrint to version 3.vi yesterday (Ubuntu xiv.04), and too upgraded the firmware from 2.three to 2.4.20150916. Later, Simplify3D ceased to communicate with the Dreamer over USB, although FlashPrint was able to communicate with the printer. I read on a Simplify3D forum (https://forum.simplify3d.com/viewtopic.php?f=9&t=3578) that the problem may be to a change to the USB VID. Anyhow, FlashPrint iii.six wouldn’t allow me to whorl dorsum the firmware to 2.iii, and it was a pain in the arse to uninstall three.6=>find/install an old version of FP=>copy the firmware files to Desktop=>uninstall old FP=>reinstall FP three.6=>re-create/paste the erstwhile firmware files from Desktop to the Firmware/Dreamer folder=>scroll back the firmware, which is now an OLDER version (ii.2), because I couldn’t find a more than contempo version of FlashPrint or the firmware files themselves. Information technology would brand more sense to include the sometime firmware files in the latest version of FlashPrint, at least until S3D and others accost the USB communication event.
Regards,
Merle
On Saturday, September 5, 2015 at 4:44:06 PM UTC+eight, Flashforge–Ivan Chen wrote:
Flashforge–Ivan Chen
belum dibaca,
23 November 2015 13.29.44
23/11/fifteen
kepadaFlashForge
Beloved Merle,
I saw you upgraded the firmware from 2.3 to 2.4(20150916). However, only the firmware earlier July,2015 supports Simplify 3D. Equally for the case, I volition ask our engineer for the solutions. If you accept whatever questions, delight transport me an email.
mk…@sz3dp.com
Best regards
Ivan
在 2015年11月18日星期三 UTC+8下午1:31:00,Merle Fyshwick写道:
Flashforge–Ivan Chen
belum dibaca,
23 November 2015 thirteen.56.39
23/11/fifteen
kepadaFlashForge
Dear Merle,
I have the initial solution to your problem. There are two ways to resolve it.
(1) You can roll back to the old firmware,Y’all demand to put the firmware information to the following path.
(2) You can modify the USB VID. The latest VID goes to 2B71 PID 0001.
I hope these will help you.
Best regards
Ivan
在 2015年11月18日星期三 UTC+8下午1:31:00,Merle Fyshwick写道:
John Mostyn
belum dibaca,
26 November 2015 15.01.14
26/xi/xv
kepadaFlashForge
Hello Ivan,
I purchased a dreamer concluding month and cannot get the wifi to work with my MacBook Pro.
Can y’all help me?
Thank you
John
Flashforge–Ivan Chen
belum dibaca,
27 Nov 2015 xv.28.34
27/eleven/15
kepadaFlashForge
在 2015年11月26日星期四 UTC+8下午4:01:14,John Mostyn写道:
Hullo, John,
I demand to check out the reason why your Dreamer cannot connect with your Mac Pro.
(1) Did you turn on the Wifi?
(2) Did you try to connect your Dreamer with your Mac Pro through the signal released by your Dreamer?
(3) Did you lot try to reboot your Dreamer and endeavour to connect once more?
If you still wonder, y’all can write me an email
mk…@sz3dp.com
I promise I tin can help yous to resolve the trouble soon.
Ivan
Joseph Ippolito
belum dibaca,
ix January 2016 06.37.21
09/01/16
kepadaFlashForge
Hi, Have a Dreamer.
The terminal version and 2d to last version of flashprint (3.vii.1, 3.half-dozen.x) could non produce linear supports – only tree like supports would show upwards after slicing. Tin can you make 3.5.1 available for download??
Pesan telah dihapus
Kurtis Wichmann
belum dibaca,
19 Feb 2016 04.29.56
nineteen/02/16
kepadaFlashForge
Please tell me in like shooting fish in a barrel linguistic communication: What firmware and software updates I need for my Creator Pro I purchased from FlashForge in June. WHere practise I find them, and tell me if there are special instrutions to install with. I’chiliad a 3d printer enthusiast not a developer.
Thanks
Kurt
JoshK
belum dibaca,
nineteen Feb 2016 08.xiv.29
19/02/xvi
kepadaFlashForge
Don’t mess with the printer firmware, it is just fine. You will want to download the software in your post to your estimator.
Tim Hawkins
belum dibaca,
xix Feb 2016 08.21.55
nineteen/02/16
kepadaflash…@googlegroups.com
+i
I accept a mid 2014 ffcp, it’s firmware is perfectly skilful, and does non need whatever updating. And so far the changes listed accept been minor things that don’t effect full general operation. No major new functionality I belive.
Information technology’s a sign of good mature stable software, that information technology is not rapidly changing.
Perry Cain
belum dibaca,
19 Feb 2016 20.20.41
19/02/16
kepadaflash…@googlegroups.com
Yeah, I asked this in a previous thread, after reading then many “I just upgraded my firmware and now my xxxx doesn’t yyyy” posts in a row.
Unless you accept a specific issue that the firmware fixes, or a specific feature the firmware adds, leave it lonely.
Andrei Grigoruta
belum dibaca,
13 Mar 2016 xviii.55.34
xiii/03/sixteen
kepadaFlashForge
Can someone provide a download link for the custom Sailfish build Flashforge puts on their FFCP’southward? (r01234)
klanten…@3d-printershop.eu
belum dibaca,
nine Mei 2017 16.10.27
09/05/17
kepadaFlashForge
Download links aren’t working anymore…
KenT
belum dibaca,
10 Mei 2017 01.22.27
10/05/17
kepadaFlashForge
Le Dude
belum dibaca,
27 Mei 2017 08.07.58
27/05/17
kepadaFlashForge
Out of curiosity. Is in that location a safest and easiest way to backup firmware prior to update? Looks like my latest and greatest flashprint offer me to upgrade my firmware to sailfish v7.viii.-pro-20160523 but as well afraid to upgrade without a backup. Don’t even know what version of firmware I accept and I’m just too afraid that I may F information technology up. Suggestion delight?
Jetguy
belum dibaca,
27 Mei 2017 11.42.55
27/05/17
kepadaFlashForge
So conspicuously, you lot don’t become information technology. Firmware is no your problem, updating firmware is not your problem. going back a version of firmware is non a problem.
In every case of a problem, it’s the user NOT following all instructions to properly setup the firmware AFTER updating before press.
Over again, recovery to flash a printer is possible, those instructions are posted. Simply, where he user totally jacks this upwards is not understanding the arrangement.
Specific to the Creator series, the firmware is Just the firmware. In other words, when yous wink firmware, you just update the version. The result is, each version of firmware stores settings in a SEPARATE retention that is Non updated when you flash firmware. So dorsum to what I said, user updates firmware, doesn’t follow ALL instructions, fails to setup proper settings specific to the NEW firmware loaded, then tries to impress and wonders why they take stupid issues.
Specifically follow these directions and practise not skip the next page about setup.
And the virtually of import steps Before you attempt to print after updating.
The Dreamer serial is a totally dissimilar brute. It has an onboard micro SD carte du jour that serves every bit a storage place for print files and file transfers. When you update or even just print on a dreamer serial from USB or wifi, you lot are actually sending a complete file that gets stored on this internal micro SD card. For firmware updates, at that place is a system folder on the card and that’s where a copy of the firmware resides. The Dreamer DOES Non run from this copy, it’south purpose is that when the dreamer is kickoff powered on, the boatload checks this for a NEW re-create or version of firmware, IF that exists, information technology checks the file, and so flashes. Somehow it marks that file so it won’t try to reflash the side by side time y’all reboot. Most Dreamer upgrade bug stem from a bad file transfer, or in some cases, units with older motherboards were not uniform past a sure version of firmware.
In all cases, backing upwards firmware is not really viable, not what yous call up it is, not useful, and not the crusade or path to recovery if you did mess up.
Jetguy
belum dibaca,
27 Mei 2017 11.59.42
27/05/17
kepadaFlashForge
Sorry for the tone, but please sympathise the background situation you may not exist enlightened of.
#1 Flash Forge has been using firmware versions labeled Sailfish, simply they are not the same equally the official supported open source version of Sailfish that I linked you documentation to. This creates a HUGE problem for you the user besides equally the community trying to back up and help y’all. You don’t know the difference, Flash Forge is Non documenting the firmware nor providing additional guidance or specific instructions, and there are faults and differences found in the firmware versions shipping on the printer.
As such, when a user similar yourself asks such a question of how to dorsum up firmware go back versions, and other problems, at that place is literally NO support from Flashforge, no instructions, no tools, no technical details. Since the open source community did not develop that exact version shipping, and compiled code on the printer is not source code and thus nobody on the planet but Wink forge could fifty-fifty tell y’all details most the exact source code and settings used.
So with all that, you the user are the i who gets messed over. You see the name sailfish, yous blame sailfish, except your problem is NOT official Sailfish firmware.
This is why I made such a point for you to READ the official firmware documentation, follow ALL instructions there, apply their supplied version of Replicator-Chiliad to update your firmware from OFFICIAL sailfish resources. Why? Because and then you lot get from the great unknown and basically falsely advertised bogus Sailfish version yous would potentially take on your printer now, and or/update to using the FlashPrint tool.
Again, totally your option what y’all want to practice, but understand the ramifications. If you run their firmware, yous go to them for support. If yous run bodily Sailfish, yous have an entire community backside it, a massive manual with full documentation, a known and trusted process and supported versions.
Once again, it’south real shame and really a massive problem that needs exposed. This labeled sailfish version that Flashprint and the printers send with is a farce. We KNOW the code is non matching the open source and supported Sailfish versions because KEY features in the open source version don’t work, the EEPROM settings tabular array is known to not match upwards, and then this causes massive grief to the Sailfish customs of back up because a user says they are running sailfish- only to detect out it’southward non the genuine article.
Zapta
belum dibaca,
16 Jul 2017 01.00.24
16/07/17
kepadaFlashForge
Jetguy, the instructions say ” If your printer already has Sailfish installed, instead refer to Chapter
7.”. You may desire to add a clarification there what ‘has Sailfish’ means. For example, does a stock FFCP user ‘has Sailfish’ ?
Glen Dooer
belum dibaca,
10 Feb 2018 09.22.41
ten/02/18
kepadaFlashForge
Any one got the Firmware for the Micro SD on a Inventor M/Lath???