How to Update Firmware Phantom 3 Pro
Sooner or later, any drone owner is faced with firmware updates. Therefore, know how to update your DJI Phantom 4 firmware is very important affair. By updating firmware, you will fix the software bugs and add new features to your drone. Also, what if Phantom 4 firmware update failed? In this commodity we volition give you all the instructions and tips on how to make updates to the firmware for your Phantom 4. There are two means how you can update your firmware on your DJI Phantom 4 to add new features and fix bugs.
The post-obit methods for upgrade DJI Phantom iv Firmware are:
- DJI Go App – (Apple IOS or Google Play)
- DJI Assistant ii – (PC)
| DJI Phantom 4 Firmware Update Using DJI Go App: |
|---|
| one. Plough on DJI Phantom 4 and Remote Controller, connect them by using USB OTG cable. |
| two. Launch the DJI Go App and download the firmware package. The upgrade will start .automatically. |
| three. The upgrade process will take most fifteen minutes. |
| iv. The DJI Go App will brandish “Update Successful” after the upgrade is finished. |
| v. Subsequently the firmware installation is complete, the DJI Phantom 4 will restart automatically. |
| DJI Phantom 4 Firmware Update Using DJI Banana 2: |
|---|
| 1. Connect DJI Phantom four with PC using a USB cablevision. |
| 2. Launch and Login into DJI Assistant two App. |
| 3. Click on firmware upgrade and download the latest version of firmware. |
| 4. The upgrade process will take about xv minutes. |
| 5. After the installation (process) is complete, the DJI Phantom 4 volition restart automatically. |
Firmware Update Informations For Phantom 4
Past updating the DJI Phantom 4 firmware y’all will set up bugs and add together new features to your drone. So, each firmware update is important. The DJI Phantom 4 & DJI Phantom 4 Pro have the aforementioned instructions for updating, merely the version of firmware are different. Therefore, pay close attending to firmware version you lot download on your quadcopter model. Too the update needs to be done on both devices; on the DJI Phantom 4 & the Remote controller.
DJI Phantom 4 Firmware Proper Installation
We have already concluded that it is important to accept the latest firmware update on your drone. What you lot still need to know is that the firmware is the disquisitional software that allows your Phantom iv to piece of work properly. Therefore, download and proper installation needs to be washed properly, then your drone can work smoothly.
Bug that can sometimes happen during download and installation is that the firmware file is incomplete which can cause an fault on your quadcopter and you have to start the installation all over once more by downloading the new version of it. If it happens that you just downloaded such a file, y’all will receive a “start upgrade” message, which means that you take installed an incomplete firmware file. Such errors tin can crusade a malfunction on the drone, ie the inability to fly.
Firmware Update Drawbacks
Each new firmware version also brings some drawbacks from time to time. I of the reasons is that sometimes the newest firmware version has a issues, and then it needs to be fixed, where you need to wait for a new version for update. The DJI Phantom 4 firmware update approximately takes about an ane hour to download and install properly. Care should likewise be taken around the update order, where it is recommended to update the DJI Apps get-go, followed by the remote controller and at the end with the Phantom 4 drone.
Observe a Large And Tranquility Place
If you lot are doing a firmware update to your DJI Phantom 4 for the first time, nosotros recommend you to find a quiet identify where you will have no disturbance and a lot of infinite.
Under no circumstances should you perform a firmware update while your drone is still flying. It is besides advisable to remove the propellers before you starting time the firmware update.
Batteries At Least 50% Charge Earlier Firmware Update
Also, before you decide to do a firmware update, accuse your batteries at to the lowest degree 50% before y’all showtime the update. (it is desirable that they are charged at 100%, both on the quadcopter and on the remote controller)
Potent Net Connection
Make sure you have a good Internet connection before you determine to download the firmware update to your DJI Phantom 4. What y’all definitely don’t want is to lose your Net connectedness during the download process. If it’s happens that you lose your Internet connection, download and install the firmware again. To avert any interference during the installation procedure, turn on the “Airplane Mode” on your telephone, so you won’t be interrupted by various applications or incoming calls. Cheque the strength of your cyberspace connection to prevent the possible errors.
How To Update Phantom 4 Firmware – ii Means
The DJI Phantom 4 offers 2 firmware update methods. You can update your Phantom iv using mobile device via DJI Go App or using your PC via DJI Banana 2. Here we volition depict stride-by-step process how to practice it correctly. When updating the latest firmware on your drone, make sure you have the latest version of the app.
- DJI Become App Version (Apple IOS or Google Play)
- DJI Assistant Version 2
After Firmware Update Check Your Settings
During the firmware update, it’southward quite possible that the settings on your DJI Phantom 4 will return to factory settings. Therefore, if yous have changed the settings on your drone such as maximum flying, return to home altitude, collision abstention, etc., you must re-enter these settings manually again after you lot end your firmware update.
This is a completely normal matter that happens during an update, and so you should definitely pay attending to it. Call back that IMU and other drone components tin can also be affected by firmware update.
IMU calibration
is recommended later on the update is done.
Calibrate IMU on Your Phantom 4
The role of the inertial measuring unit IMU (Inertial measurement unit of measurement) is to help the drone determine its position in space. Therefore, afterwards updating the firmware, y’all must calibrate the IMU and compass. To calibrate your
Phantom four, launch the DJI Go app and get to the settings bill of fare. By clicking on the icon of the quadcopter, open “Primary Command Settings” and click on “Advanced Settings”, after which you demand to select “Sensors” and Calibrate Compass. Do non forget that you need to behave out calibration on the street and certainly away from any electronic equipment or magnets.
Calibrate The Compass on Your Phantom iv
During the firmware update on your Phantom 4, information technology is necessary to calibrate the compass over again so that your drone could piece of work properly.
The DJI Phantom iv Latest Firmware Update Version
Hither is the latest firmware update verison for your Phantom 4 model. Download
Here.
How To Update DJI Phantom 4 Firmware Using DJI Assistant
- First stride is to connect the DJI Phantom four to a PC with a USB cable.
- Launch the DJI Assistant 2 software on your PC and click “User Login” on the height-right corner to log into your DJI account and select Phantom iv.
- Click on firmware upgrade on the left and select the firmware version to which y’all’d similar to upgrade.
- Click “Outset to upgrade” and wait for the firmware parcel to be downloaded. Upgrade will showtime automatically later on the download finishes
- The whole process takes about 15 minutes.
- Make sure that PC is continued to the internet, the drone has power and do not disconnect the USB cable during the upgrade.
- Later the process (upgrade) is completed, the DJI Phantom 4 volition restart automatically.
The post-obit things may occur during the upgrade process:
- The gimbal may go limp
- The indicators on the arms of aircraft may wink abnormally
- The aircraft may reboot automatically
How To Update Phantom 4 Remote Controller Firmware
To upgrade the DJI Phantom 4 controller y’all need to employ DJI Become App software. You lot will receive “Firmware Requires Upgrade” notifications every fourth dimension the new version is available. Below are the detailed steps required to successfully perform a Phantom 4 remote command firmware update:
- Turn on the remote controller (RC)
- Make certain the battery level is above fifty% before upgrading
- Connect your remote controller and mobile device with a USB cable
- Ensure that your mobile device has access to the net and launch the DJI Get app
- Tap the prompt and an upgrade reminder will be displayed “RC requires upgrade”
- Click “Download firmware”
- The DJI Become app will offset downloading the firmware packet, click “Start to Upgrade” and look for the firmware packet to be downloaded.
- The whole process takes around 5 minutes. Practise not turn off the remote controller or go out the DJI GO app during the upgrade
- The DJI GO app will display “Update Successfully” after the upgrade is completed
If the upgrade fails, just restart the remote controller. The remote controller will attempt to upgrade again.
How To Update DJI Phantom iv Firmware Using DJI Go App
- Turn on the remote controller and the DJI Phantom four
- Connect one finish of the USB OTG cable to the aircraft, and insert the other end into the USB of the mobile device
- Launch the DJI GO App and connect to the DJI Phantom 4
- Click “Start to Upgrade” and await for the firmware bundle to be downloaded. The upgrade volition first automatically after the download finishes.
- During the upgrade the gimbal may go limp and the aircraft may reboot automatically. Don’t plough off the aircraft or remote controller, or go out the DJI Go app. The whole process takes about 15 minutes.
- The DJI Get app volition display “Update Successful” after the upgrade is successful.
- If the upgrade fails, please reboot the Phantom 4. The aircraft will attempt to upgrade again.
- At the end of firmware update the DJI Phantom four will automatically restart.
If you are not completely certain and have more questions about DJI Phantom four firmware update using DJI GO app, yous have 1 great video here to watch.
Firmware Update Problem & Failure Signs For DJI Phantom 4
Sometimes an error may occur during a firmware upgrade. Here are a few signs that the upgrade has failed:
- If the firmware upgrade takes longer than 30 minutes is the first sign that something is wrong. The firmware upgrade should take approximately 15 minutes to complete. The same goes for Remote Controller.
- If the DJI Go App never reach 100% of the upgrade on your screen.
What To Practice If Firmware Update Gets Stuck Or Fails on Phantom four
If you find yourself in a situation where the firmware update fails or gets struck during the upgrade yous demand to practise the following steps. Delete the file you lot just downloaded to your device and download the new firmware file again.
Follow the same steps that we take described higher up, and install the firmware update to your Phantom iv. Don’t forget that DJI Get & DJI Assistant two Apps need to be upward to date before you lot upgrade your Phantom 4 and RC. If y’all have a trouble with DJI Become, then endeavour the installation with DJI Assistant two. After the installation is finished, you lot need to restart your DJI Phantom 4.
DJI Phantom iv Firmware Update Benefits
The DJI is known to regularly update its quadcopters, and they are releasing the new firmware updates every month every bit new model comes out on the market. After some time, when lot of fixes and bugs are updated the new versions are less frequent.
Here is a list of erstwhile firmware updates which take fixed old bugs and added new features to the drone:
- New Pano shooting modes with new features.
- No-Fly Zone Direction Update.
- Optimized No-Fly Zone Return to Domicile with unlocking.
- Optimized GEO Zone Management.
- The 4K video recording stability is improved
- Fixed a stall consequence with gimbal automobile calibration
- Improve gimbal stability during flight by optimizing it.
- New feature that automatically turn off the front end LED for taking better photos or videos.
- Camera and lens spectrum parameters are optimized.
- Propeller guard recognition is improved by new update to reduce non detection.
- A modify to the notification tone for gimbal initialization.
- Camera live view is not blurry when using a color profile.
- Organization status information for batteries is corrected.
- Download speed for photos/videos is increased
Main Reasons Why Firmware Update Sometimes Fail
What if Phantom iv firmware update failed? Firmware updates can optimize flying stability and, equally a rule, come with new features. To help you avoid issues during the firmware update, we take summarized 4 main reasons that could cause the update to neglect, and what to practice if the firmware update fails.
1. Depression Battery
The upgrade process can accept a long time, specially when many new features are added. If the battery runs out, the update will be interrupted.
Solution: Brand sure the bombardment level is at least 50% before upgrading.
two. Battery Signal Error
To update each battery properly, you will need to connect and update each individually. When LEDs 1 and 2 blink, it means that the update is in progress. When LEDs ii and 3 low-cal upwardly, information technology ways that the update is not completed.
Solution:
- Try updating again.
- When a low bombardment notification appears, charge the battery ane hr before the update.
- (Note: LEDs may not blink normally.)
- If the mistake bulletin still appears, please contact DJI Back up
-
Get-go a case review:
world wide web.dji.com/support
3. Connectedness Error
If you use the DJI Assistant 2 or DJI Get App to update the firmware, the loss of Wi-Fi connection tin can crusade interruption. An abnormal device connection or an unexpected application termination can lead to upgrade crashes.
Solution:
- Bank check your WiFi connection and make sure the file has been downloaded completely.
- Attempt a dissimilar USB cable to reconnect.
- If the update fails and the awarding does not receive a notification, reinstall the awarding and get-go the update process again.
- Effort updating from some other mobile device.
- If updating via DJI Go applications fails, try downloading DJI Assistant 2, connect to your Phantom 4 and remote controller for upgrade.
4. Firmware Version Mismatch
If the update fails continuously, the firmware of the Phantom 4 and the controller (transmitter) may non match. Utilise your estimator to update the firmware on your Phantom four and controller from “DJI Banana two”. If the trouble persists, please contact your store of purchase or the
DJI Back up.
DJI Phantom 4 Functions Firmware Check
The DJI Phantom 4 has the Active Tracking and Obstruction Avoidance functions, the performance of which is worth making sure before sending your drone to flight later on the firmware update. To test this functions yous need to launch DJI GO, select the menu in the upper right corner and open the big settings card. You will need an icon that simulates the signals in the class of a ball, which opens admission to the menu “Visual Navigation Settings”. Each setting in this carte du jour must be activated, including the “Enable Backward Flying” option.
Attention!Do not forget to make sure that there are no obstacles behind the Phantom 4 during the procedure. This seems to be quite obvious, merely when checking for the beginning fourth dimension, many drone owners really forget nigh this bespeak.
When everything is prepare for flying, return to the main photographic camera mode and click the icon in the form of a target, information technology will bring up a menu with the buttons Tap Fly (automatic flight to the bespeak indicated on the screen), Active Track (tracking the movements of the specified object), Normal and Smart. Thus, Obstruction Avoidance technology volition work, and in the event of an obstacle, the copter volition stop a meter away from the object and look for a safer way.
