How to Update Firmware on Ricoh M2550b

How to Update Firmware on Ricoh M2550b



Download Article



Download Article

Updating your router firmware can aid improve connectivity and go on your router secure. It is always recommended to install the latest bachelor updates to proceed your network rubber and efficient.
[1]

Virtually routers have a built-in update checker, which may or may non perform the entire process automatically. If yous’re using an Apple Airport router, yous can use the AirPort Utility programme to check for updates.

  1. 1

    Check the physical router for the address.
    Y’all can admission your router past inbound its IP address into your spider web browser.
    [2]

    Most routers have this IP address printed on the sticker affixed to the bottom.
    If your router does not, or you don’t take access to the physical router, follow these instructions to notice it.

  2. 2

    Open the Starting time menu or screen and blazon
    “network condition.”

    This will open the “View network status and tasks” window.

    Advertizement

  3. 3

    Click the proper noun of your electric current connection in the top-right corner.
    It will have an icon indicating the type of connexion you are using (Wi-Fi, Ethernet, etc.).

    • Make sure you’re connected to the router’s network.
  4. 4

    Click the “Details” button in the new window that appears.
    This will display a listing of entries.

  5. v

    Find the
    IPv4 Default Gateway
    entry.

    The IP address listed here is your router’s IP accost.
    [3]

    Make a note of it and skip down to the
    Installing Router Updates
    department below.

  6. Advertisement

  1. ane

    Check your concrete router for the IP address.
    Y’all’ll access your router’south configuration page by entering its IP accost into a web browser on your figurer.
    Most routers have the IP address printed on a sticker on the bottom.
    If your router doesn’t have this sticker, or y’all tin’t physically access the router, follow the instructions in this method.

  2. 2

    Click the Apple menu and select “Arrangement Preferences.”
    This volition open up a new Organization Preferences window.

  3. 3

    Click the “Network” push button.
    This will display all of your network connections.

  4. iv

    Select your active connection in the left frame.
    It will have a dark-green indicator side by side to information technology, and will say “Connected” underneath.

    • Brand certain you lot’re connected to the router’s network.
  5. v

    Click the “Advanced” button.
    This will open up a new window.

  6. 6

    Click the “TCP/IP” tab and wait for the “Router” entry.
    This is the IP address for your router.

  7. Advertisement

Read:  Cue Firmware Update Wont Work Void Wireless
  1. 1

    Connect to the router via Ethernet.
    Some routers are setup to not allow admission to the configuration page if you are connected via Wi-Fi. Connecting via Ethernet volition aid ensure that you tin can properly access the configuration tools.

  2. 2

    Enter your router’due south IP accost into a web browser’s address bar.
    You can observe this accost by following the methods outlined above.

    • Enter the address equally if you were visiting a webpage.
  3. 3

    Enter your login information.
    When you try to open the configuration folio, you’ll be prompted to enter your router login information. If you don’t have this data saved, yous can attempt some of the common defaults:

    • Try leaving both fields blank. Many routers don’t have any username or password required.
    • Try entering “admin” equally the username, and and so leave the password blank. If that doesn’t work, enter “admin” every bit the password too.
    • Await upwards your router brand and model at
      routerpasswords.com. This volition brandish the default login information.
    • If the default login data doesn’t piece of work, and you lot can’t figure out how to log in, you can reset the router by pressing and holding the physical Reset button on the back. This will erase all of your router’southward settings, possibly disrupting your wireless network if yous changed whatsoever default settings for it. You tin can and then use the default login.
  4. 4

    Open the “Firmware,” “Router Upgrade,” or “Update” page.
    The name of this page volition be different for every dissimilar router manufacturer. The location varies, but you tin can unremarkably find it in the “Administration,” “Utilities,” or “Maintenance” section.

  5. v

    Click the “Check” button to meet if updates are available.
    Many routers have a button that will check to run into if a new version of the router’s firmware is available.

  6. 6

    Download the latest firmware files if presented with a link.
    Depending on the router, you lot may be provided a link to the latest firmware version, or the router may even be able to download information technology on its own.

  7. vii

    Visit the manufacturer’southward support site if no link is given.
    If there is a newer version of the firmware bachelor, but no links are given, you’ll need to download the firmware from the manufacturer. You tin can become these files from the Support sections of these sites.

    • Perform a spider web search to detect the back up site. For example, searching for “Netgear support” will get you lot the
      netgear.com/back up link.
  8. 8

    Enter your router’south model into the support site’southward search.
    You can find your router model number at the tiptop of the configuration page. Enter this model number into the search on the manufacturer’southward website.

  9. nine

    Find the latest firmware files.
    Depending on the router, there may be a single firmware files, many unlike ones, or none at all. Download the latest version, either by date or by number. The file volition commonly download in ZIP format.

    • Make sure you don’t download a version earlier than the ane you’re using. You can meet what version you’re using on your router’s firmware update configuration page.
  10. 10

    Extract the ZIP file.
    After the firmware file has finished downloading, double-click the downloaded ZIP file to open it, so click “Extract” to extract the contents. This will usually give you lot one file with an unfamiliar extension.

  11. xi

    Upload the file to your router.
    Back in your router’southward firmware update page, click the “Cull File” push and navigate to your newly-extracted file. Select it and then click the “Upload” push button in the router configuration page.

  12. 12

    Wait while the update is applied.
    Once the file is uploaded, the firmware update process volition begin. You lot’ll typically come across a progress bar, and the update procedure may have 3-five minutes. Your router will probable reset subsequently, which will disconnect you from the network for a few moments.

  13. thirteen

    Reset your router if the update fails.
    If the firmware update doesn’t work, and you can no longer connect to the router, yous can manually reset it and try once again. Printing and hold the Reset push on the back of the router for thirty seconds to reset it to factory defaults. You’ll need to reconfigure your network if y’all fabricated any changes to the default settings previously.

  14. Advertisement

  1. 1

    Open up the AirPort Utility program in your Utilities folder.
    This program allows you to alter your Drome router’south settings. Yous can observe the Utilities binder in your Applications binder.

    • If y’all’re using an iOS device, you tin download the Airdrome Utility from the App Store.
    • The AirPort Utility is just available on Mac Os X and iOS devices.
  2. 2

    Click your base station and enter your countersign.
    The base of operations station icon may have a scarlet badge number indicating that an update is available, merely this may non appear until after y’all’ve entered your password.

  3. iii

    Click the “Update” button to download and install the update.

    [iv]

    This button only appears if an update is available. Click “Continue” when prompted to ostend.

  4. 4

    Expect for the router to update.
    This may take several minutes to complete. You volition be disconnected from the network for a short time during the update process.
    [5]

  5. Advertizing

Add New Question

  • Question

    Do I need to update my router’s firmware?

    Luigi Oppido

    Luigi Oppido is the Possessor and Operator of Pleasure Betoken Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, information recovery, virus removal, and upgrades. He is also the host of the Reckoner Man Show! broadcasted on KSQD covering central California for over two years.

    Luigi Oppido

    Estimator & Tech Specialist

    Expert Respond

  • Question

    Do I have to inform my internet service company?

    Joseph Coscia

    Joseph Coscia

    Community Reply

    You lot usually shouldn’t accept to, unless it’s their router and something went wrong with the update.

  • Question

    How do I update my WiFi?

    Allan Cramer

    Allan Cramer

    Customs Answer

    Access your router settings past typing 192.168.1.i or 192.168.1.0 into your web browser’southward accost bar. Provided that yous have the admin username/password to login to the router (commonly on a sticker on the router, or typically the admin/countersign will piece of work), in that location will most likely have a notification on the first screen letting you know that an update is available when yous access the router.

  • Question

    How exercise I test and confirm that the firmware update was successful?

    Allan Cramer

    Allan Cramer

    Community Answer

    Typically, if your router is still functioning as it was prior to the update, and so it was successful.

Ask a Question

200 characters left

Include your email accost to get a bulletin when this question is answered.

Submit





Advertisement

  • Download your internet provider’s app for firmware update reminders.
    [half-dozen]

Advertisement

  • Having firmware that’s not updated can make you lot susceptible to firewall attacks.
    [7]

Advertizing

Nigh This Article


Article Summary
X

1. Connect to the router via Ethernet.
2. Go to the router’southward IP address into a web browser.
3. Log in every bit an admin.
four. Go to the
Firmware
or
Update
page.
5. Check for an update.
6. Download the latest firmware if prompted.
7. Extract the firmware file.
8. Upload the file to your router.

Did this summary help yous?

Thanks to all authors for creating a page that has been read 502,169 times.

Is this article upwardly to date?

How to Update Firmware on Ricoh M2550b

Check Also

Rolling Back Dji Mavic Firmware on Mac

Rolling Back Dji Mavic Firmware on Mac

Rolling Back Dji Mavic Firmware on Mac DJI introduces new firmware to fix bugs and …