How to Update Firmware on Phantom 2 Vision Plus
Sooner or after, any drone owner is faced with firmware updates. Therefore, know how to update your DJI Phantom four firmware is very important thing. Past updating firmware, you will fix the software bugs and add new features to your drone. Also, what if Phantom 4 firmware update failed? In this article we will requite you all the instructions and tips on how to make updates to the firmware for your Phantom 4. In that location are two ways how you can update your firmware on your DJI Phantom iv to add together new features and fix bugs.
The following methods for upgrade DJI Phantom iv Firmware are:
- DJI Become App – (Apple IOS or Google Play)
- DJI Assistant 2 – (PC)
| DJI Phantom 4 Firmware Update Using DJI Go App: |
|---|
| i. Turn on DJI Phantom 4 and Remote Controller, connect them by using USB OTG cable. |
| 2. Launch the DJI Go App and download the firmware package. The upgrade will get-go .automatically. |
| iii. The upgrade process will take about 15 minutes. |
| four. The DJI Go App will display “Update Successful” subsequently the upgrade is finished. |
| 5. After the firmware installation is consummate, the DJI Phantom 4 will restart automatically. |
| DJI Phantom iv Firmware Update Using DJI Assistant 2: |
|---|
| 1. Connect DJI Phantom 4 with PC using a USB cable. |
| ii. Launch and Login into DJI Assistant two App. |
| iii. Click on firmware upgrade and download the latest version of firmware. |
| 4. The upgrade procedure will take about 15 minutes. |
| 5. After the installation (procedure) is complete, the DJI Phantom four will restart automatically. |
Firmware Update Informations For Phantom 4
By updating the DJI Phantom iv firmware yous will gear up bugs and add together new features to your drone. So, each firmware update is important. The DJI Phantom four & DJI Phantom iv Pro accept the same instructions for updating, but the version of firmware are dissimilar. Therefore, pay close attention to firmware version you download on your quadcopter model. Also the update needs to be done on both devices; on the DJI Phantom 4 & the Remote controller.
DJI Phantom four Firmware Proper Installation
We have already concluded that information technology is important to have the latest firmware update on your drone. What you still need to know is that the firmware is the critical software that allows your Phantom 4 to work properly. Therefore, download and proper installation needs to be done properly, and then your drone can piece of work smoothly.
Problems that tin sometimes happen during download and installation is that the firmware file is incomplete which can cause an error on your quadcopter and you lot have to beginning the installation all over again by downloading the new version of it. If information technology happens that you lot just downloaded such a file, you will receive a “start upgrade” message, which ways that you have installed an incomplete firmware file. Such errors can cause a malfunction on the drone, ie the inability to fly.
Firmware Update Drawbacks
Each new firmware version also brings some drawbacks from time to time. Ane of the reasons is that sometimes the newest firmware version has a bug, then it needs to exist fixed, where you need to wait for a new version for update. The DJI Phantom four firmware update approximately takes about an 1 hr to download and install properly. Care should too exist taken around the update order, where it is recommended to update the DJI Apps start, followed by the remote controller and at the end with the Phantom 4 drone.
Notice a Large And Quiet Identify
If you are doing a firmware update to your DJI Phantom iv for the starting time time, we recommend you lot to observe a quiet place where yous will have no disturbance and a lot of infinite.
Under no circumstances should you perform a firmware update while your drone is even so flying. It is also advisable to remove the propellers before you starting time the firmware update.
Batteries At Least 50% Charge Before Firmware Update
Also, before you decide to practise a firmware update, charge your batteries at least 50% before you commencement the update. (it is desirable that they are charged at 100%, both on the quadcopter and on the remote controller)
Stiff Cyberspace Connexion
Make sure you accept a practiced Internet connectedness before you determine to download the firmware update to your DJI Phantom 4. What y’all definitely don’t want is to lose your Internet connectedness during the download process. If it’s happens that you lose your Internet connexion, download and install the firmware once again. To avoid whatever interference during the installation procedure, plow on the “Plane Mode” on your phone, so y’all won’t exist interrupted by diverse applications or incoming calls. Cheque the force of your net connection to preclude the possible errors.
How To Update Phantom 4 Firmware – 2 Ways
The DJI Phantom 4 offers 2 firmware update methods. You can update your Phantom iv using mobile device via DJI Go App or using your PC via DJI Assistant 2. Hither we will depict step-by-step process how to exercise it correctly. When updating the latest firmware on your drone, make sure you accept the latest version of the app.
- DJI Go App Version (Apple IOS or Google Play)
- DJI Assistant Version 2
Afterward Firmware Update Check Your Settings
During the firmware update, it’s quite possible that the settings on your DJI Phantom four will return to manufactory settings. Therefore, if you have changed the settings on your drone such as maximum flying, return to home altitude, standoff avoidance, etc., you lot must re-enter these settings manually again after you lot finish your firmware update.
This is a completely normal matter that happens during an update, and then you should definitely pay attention to information technology. Recall that IMU and other drone components can also be affected by firmware update.
IMU scale
is recommended subsequently the update is washed.
Calibrate IMU on Your Phantom 4
The role of the inertial measuring unit IMU (Inertial measurement unit) is to help the drone decide its position in space. Therefore, afterward updating the firmware, you must calibrate the IMU and compass. To calibrate your
Phantom iv, launch the DJI Go app and go to the settings bill of fare. By clicking on the icon of the quadcopter, open “Principal Control Settings” and click on “Advanced Settings”, after which you need to select “Sensors” and Calibrate Compass. Do not forget that you need to carry out calibration on the street and certainly away from any electronic equipment or magnets.
Calibrate The Compass on Your Phantom 4
During the firmware update on your Phantom iv, it is necessary to calibrate the compass once again so that your drone could work properly.
The DJI Phantom 4 Latest Firmware Update Version
Here is the latest firmware update verison for your Phantom 4 model. Download
HERE.
How To Update DJI Phantom 4 Firmware Using DJI Assistant
- First pace is to connect the DJI Phantom 4 to a PC with a USB cable.
- Launch the DJI Assistant ii software on your PC and click “User Login” on the top-correct corner to log into your DJI account and select Phantom iv.
- Click on firmware upgrade on the left and select the firmware version to which you’d like to upgrade.
- Click “Start to upgrade” and expect for the firmware package to be downloaded. Upgrade will kickoff automatically afterward the download finishes
- The whole process takes near fifteen minutes.
- Make sure that PC is connected to the internet, the drone has power and practise not disconnect the USB cablevision during the upgrade.
- Subsequently the process (upgrade) is completed, the DJI Phantom 4 volition restart automatically.
The following things may occur during the upgrade process:
- The gimbal may go limp
- The indicators on the arms of aircraft may flash abnormally
- The shipping may reboot automatically
How To Update Phantom 4 Remote Controller Firmware
To upgrade the DJI Phantom iv controller you need to apply DJI Go App software. You will receive “Firmware Requires Upgrade” notifications every time the new version is available. Below are the detailed steps required to successfully perform a Phantom 4 remote control firmware update:
- Turn on the remote controller (RC)
- Brand sure the battery level is above 50% earlier upgrading
- Connect your remote controller and mobile device with a USB cable
- Ensure that your mobile device has access to the internet and launch the DJI GO app
- Tap the prompt and an upgrade reminder will be displayed “RC requires upgrade”
- Click “Download firmware”
- The DJI Get app volition showtime downloading the firmware parcel, click “Start to Upgrade” and wait for the firmware bundle to be downloaded.
- The whole process takes around v minutes. Practice non plough off the remote controller or exit the DJI Become app during the upgrade
- The DJI GO app will display “Update Successfully” later on the upgrade is completed
If the upgrade fails, only restart the remote controller. The remote controller will attempt to upgrade again.
How To Update DJI Phantom 4 Firmware Using DJI Go App
- Turn on the remote controller and the DJI Phantom four
- Connect one end of the USB OTG cable to the aircraft, and insert the other end into the USB of the mobile device
- Launch the DJI GO App and connect to the DJI Phantom 4
- Click “Start to Upgrade” and wait for the firmware package to be downloaded. The upgrade will beginning automatically after the download finishes.
- During the upgrade the gimbal may go limp and the aircraft may reboot automatically. Don’t turn off the aircraft or remote controller, or exit the DJI Go app. The whole procedure takes most xv minutes.
- The DJI GO app will display “Update Successful” after the upgrade is successful.
- If the upgrade fails, please reboot the Phantom 4. The shipping will effort to upgrade again.
- At the cease of firmware update the DJI Phantom 4 will automatically restart.
If y’all are not completely sure and accept more than questions most DJI Phantom four firmware update using DJI Get app, you take one great video here to spotter.
Firmware Update Trouble & Failure Signs For DJI Phantom 4
Sometimes an fault may occur during a firmware upgrade. Hither are a few signs that the upgrade has failed:
- If the firmware upgrade takes longer than 30 minutes is the first sign that something is wrong. The firmware upgrade should accept approximately fifteen minutes to complete. The same goes for Remote Controller.
- If the DJI Go App never reach 100% of the upgrade on your screen.
What To Do If Firmware Update Gets Stuck Or Fails on Phantom 4
If you detect yourself in a situation where the firmware update fails or gets struck during the upgrade yous need to do the following steps. Delete the file you just downloaded to your device and download the new firmware file again.
Follow the same steps that nosotros have described above, and install the firmware update to your Phantom four. Don’t forget that DJI Become & DJI Banana 2 Apps need to be up to date earlier you upgrade your Phantom 4 and RC. If you have a problem with DJI Go, then effort the installation with DJI Assistant 2. Afterward the installation is finished, yous need to restart your DJI Phantom 4.
DJI Phantom 4 Firmware Update Benefits
The DJI is known to regularly update its quadcopters, and they are releasing the new firmware updates every month every bit new model comes out on the marketplace. Subsequently some time, when lot of fixes and bugs are updated the new versions are less frequent.
Hither is a listing of one-time firmware updates which take fixed old bugs and added new features to the drone:
- New Pano shooting modes with new features.
- No-Fly Zone Direction Update.
- Optimized No-Fly Zone Return to Home with unlocking.
- Optimized GEO Zone Management.
- The 4K video recording stability is improved
- Fixed a stall outcome with gimbal auto calibration
- Amend gimbal stability during flight by optimizing it.
- New feature that automatically turn off the front LED for taking meliorate photos or videos.
- Photographic camera and lens spectrum parameters are optimized.
- Propeller guard recognition is improved by new update to reduce not detection.
- A change to the notification tone for gimbal initialization.
- Photographic camera live view is not blurry when using a color profile.
- System status data for batteries is corrected.
- Download speed for photos/videos is increased
Main Reasons Why Firmware Update Sometimes Neglect
What if Phantom iv firmware update failed? Firmware updates tin optimize flight stability and, every bit a rule, come with new features. To help you avoid issues during the firmware update, we have summarized iv chief reasons that could crusade the update to fail, and what to practice if the firmware update fails.
i. Low Battery
The upgrade process tin take a long time, particularly when many new features are added. If the battery runs out, the update will be interrupted.
Solution: Brand sure the battery level is at least 50% before upgrading.
ii. Battery Signal Mistake
To update each bombardment properly, you lot volition demand to connect and update each individually. When LEDs 1 and ii blink, information technology means that the update is in progress. When LEDs 2 and 3 light up, information technology means that the update is not completed.
Solution:
- Try updating once more.
- When a low bombardment notification appears, accuse the bombardment 1 hour before the update.
- (Note: LEDs may not blink unremarkably.)
- If the error message still appears, please contact DJI Back up
-
Beginning a case review:
www.dji.com/back up
three. Connexion Error
If you employ the DJI Assistant two or DJI Go App to update the firmware, the loss of Wi-Fi connexion can cause pause. An abnormal device connection or an unexpected application termination can atomic number 82 to upgrade crashes.
Solution:
- Bank check your WiFi connexion and make sure the file has been downloaded completely.
- Attempt a dissimilar USB cable to reconnect.
- If the update fails and the application does not receive a notification, reinstall the application and start the update process once again.
- Try updating from another mobile device.
- If updating via DJI GO applications fails, try downloading DJI Assistant two, connect to your Phantom 4 and remote controller for upgrade.
4. Firmware Version Mismatch
If the update fails continuously, the firmware of the Phantom 4 and the controller (transmitter) may not match. Utilise your computer to update the firmware on your Phantom 4 and controller from “DJI Banana 2”. If the trouble persists, please contact your shop of purchase or the
DJI Support.
DJI Phantom 4 Functions Firmware Check
The DJI Phantom 4 has the Active Tracking and Obstacle Abstention functions, the performance of which is worth making sure before sending your drone to flight afterwards the firmware update. To exam this functions you need to launch DJI Become, select the card in the upper correct corner and open the big settings menu. You volition need an icon that simulates the signals in the form of a ball, which opens access to the bill of fare “Visual Navigation Settings”. Each setting in this carte du jour must exist activated, including the “Enable Astern Flying” option.
Attending!Do not forget to make sure that there are no obstacles behind the Phantom four during the procedure. This seems to be quite obvious, just when checking for the start fourth dimension, many drone owners really forget about this signal.
When everything is set up for flight, render to the main camera mode and click the icon in the form of a target, information technology will bring up a card with the buttons Tap Wing (automated flight to the point indicated on the screen), Active Rails (tracking the movements of the specified object), Normal and Smart. Thus, Obstruction Abstention technology will work, and in the result of an obstacle, the copter will cease a meter away from the object and wait for a safer fashion.
