How to Update Firmware on Microsoft Wireless Adaptor

Here are some things to know before yous start using your adapter:

• The adapter works all-time if you have both an HDMI port and a USB charging port on your HDTV, monitor, or projector.

• This adapter needs to exist continued to a USB charging port considering information technology draws power from the USB connectedness.

• Make sure your Windows PC has the latest updates. For info on checking updates, become to
  Update Windows.

• Brand certain your adapter besides has the latest firmware. To larn how to update the firmware, seeUpdate the Microsoft Wireless Brandish Adapter.

There are different versions of the wireless display adapter. The cable length and dimensions are slightly dissimilar for each i.

Apply this table to check if your device works with the adapter you have.

Here’due south how to set upwards your adapter on the second brandish:

1. Plug the HDMI end of your adapter into the HDMI port on your HDTV, monitor, or projector.

2. Plug the USB finish of the adapter into a USB charging port on your 2d display. If your display doesn’t have a USB charging port, plug the USB end into any standard USB Type-A charger with 5W (5V/1A).

3. On your 2nd brandish, fix the input to HDMI. If you’re not sure how to do this, check the manual that came with it.

Here’s how to connect to your adapter on a Windows PC:

1. On your PC, press
   Windows logo primal
   +
   K.

2. Select the name of your adapter from the list of available connections. The name is shown on your 2d display.

For other Miracast® enabled devices, wait for
Miracast
or
Cast
in
Settings
and follow your device’s instructions.

To modify the settings for your adapter, update the firmware, and more, y’all’ll need the
Microsoft Wireless Brandish Adapter app. Here’s how to install it from the Microsoft Store:

1. SelectFirst
   >All Apps
   >
   Microsoft Store.

2. Make sure you lot’re signed in with your Microsoft account.

3. In search, enterMicrosoft Wireless Brandish Adapter.

4. Select the app, and then select
   Go. The app will install on your device.

Here’s how to update the firmware on your adapter:

1. Connect your Windows PC to your adapter.

2. Open up theMicrosoft Wireless Display Adapter
   app.

3. Select
   Update & security. If an update is available, selectUpdate. You’ll need to keep the app open up and stay connected to the adapter until updates are completed.

4. To go on your adapter upwards to engagement, turn on
   Update adapter automatically. Updates will take place when updates are bachelor and your adapter is continued to your Windows PC.

Get in easier to recognize your adapter by changing its name. Here’s how:

1. Connect your Windows PC to your adapter.

2. Open theMicrosoft Wireless Display Adapter
   app.

3. SelectPersonalization
   and enter the name you want. The change will take effect the next time you connect your adapter.

4. Disconnect and reconnect to your adapter to meet the change right abroad.

You can prevent others from pairing with your adapter or using it without your permission. Here’s how:

1. Connect your Windows PC to your adapter.

2. Open theMicrosoft Wireless Display Adapter
   app.

3. SelectUpdate & security
   and plow on
   Enter a PIN when connecting a new device.

Go amend performance when your Windows PC and adapter are continued to the same Wi-Fi network. If you demand to modify the network your adapter is connected to, here’s how:

1. Connect your Windows PC to your adapter.

2. Open theMicrosoft Wireless Display Adapter
   app and selectNetwork.

3. Choose the network you want and selectConnect.

Note:This only applies to Microsoft 4K Wireless Display Adapter.