How to Update Firmware on Mavic Pro

Today you volition larn how to update the firmware on a Mavic ii. Our DJI Mavic 2 Firmware Update Guide covers both the
Mavic two Pro
and the
Mavic 2 Zoom. To ensure the procedure is every bit painless as possible just follow the steps nosotros outline below. If you take questions regarding our Mavic two Firmware Update Guide, don’t hesitate to reach out in the comments!

Mavic 2 Firmware Update Video

If yous prefer to acquire the different ways to update the Mavic two Firmware, as well as figure out when the all-time time to update check out our Video:

UPDATE 2:

What’southward New in v01.00.03.00:

1. Fixed the camera live view and so it does not become blurry when using a color profile, i.e. D-Log, B&W, etc.
2. Added Waypoints (requires DJI GO 4 v4.3.12 or later).
3. Enabled Lateral Vision Systems for Timelapse (see Mavic two Pro/Zoom User Manual for more information almost obstacle sensing).
4. Increased the altitude accuracy of Waypoints in Hyperlapse. When using Task Library to echo a flight, make sure the takeoff altitude is the same.
5. Fixed problems:
   1. The remote controller’s operating time was shortened when used with some mobile devices.
   2. You could not open Sphere panorama photos in Facebook.
   3. The Intelligent Flight Bombardment could not exist charged when the environment temperature was between 5° and 10° C.

Update:

Previous Firmware versions:

What’due south New
in v01.00.00.00 – v01.00.02.00:
Official Release Notes Here.

Steps to update the Mavic 2 Firmware via DJI GO 4 in App Update:

Before yous go started with updating the firmware on your Mavic ii Pro or Mavic ii Zoom, you can take extra precautions, past removing the propellers before the update, and ensuring that your batteries are charged. The removal of the batteries reduces the risk of the motors, spinning up accidentally and causing havoc on your desk-bound :). Also be certain that the gimbal clamp is removed and that all legs of the drone are unfolded. Alright, let’s become to that update!

1. Download the latest version of the DJI GO App on the Apple tree or Google Play App Store.
2. Launch DJI GO App.
3. Ensure you have at least 50% bombardment in your Mavic 2 and remote command bombardment.
4. On the Home Screen of the DJI GO 4 App you should get an Update Available pop-up once the drone is turned on.
   1. If this doesn’t occur click the Photographic camera Button to launch the Camera View.
   2. Tap the top status bar in top middle of the screen.
   3. Under Overall Condition it should now say Update available/required.
   4. Tap Update.

*If you have issues with the Update see the section titled “If y’all have Issues” section below.

How exercise I figure out which version the Mavic 2 aircraft, remote control or DJI Go App I have?

If you are wondering what version of the DJI Go four App you take on your smartphone or if you only desire to know which version of the Mavic 2 Firmware you accept on your Mavic 2 Pro or Mavic ii Zoom, you can follow these steps to find that out.

1. In the DJI GO App launch the Camera View.
2. Tap the top right Menu icon (…)
3. On the popped up Menu tap the iii dots (…) on the left bottom menubar.
4. Scroll down to “Most”.
5. Tap About.
6. See App Version, Shipping Version, RC Version.

If you have Bug with the DJI GO four In-App Update:

You may get the occassional error while trying to update. This tin can of course be caused by a variety of reasons. You can effort the following steps to try and alleviate the issue or use the DJI Banana 2 Programme on a PC or Mac to update your Mavic two. We cover those steps besides in a bit below.

1. Turn off the Mavic two and the remote control.
2. Delete the DJI GO iv App off of your smartphone.
3. Reinstall the DJI Go iv App through the Appstore.
4. Restart the Firmware Update in the DJI Become App.
5. After 100% complete, power bike the Mavic 2 once again and likewise power wheel the remote control.

Steps to update the Mavic 2 Pro or Mavic 2 Zoom Firmware with the DJI Banana 2:
Preferred Method*

Our preferred method of updating our Mavic 2 Pro. Of course, this also works for the Zoom. You tin can select which firmware version you want to update to while using the Assistant ii. Follow these steps to update your Mavic 2 with the Banana.

1. Ensure the Mavic 2 battery is at minimum 50% charged.
2. Ensure the PC or Mac you lot will utilize for the upgrade is connected to the cyberspace.
3. Download the DJI Assistant 2 Software from
   DJI
   Hither
   
   
   
   
   
4. Connect the shipping to a PC or Mac via the supplied USB-C cable.
   1. Plug the USB-C plug into the USB-C port located on the right side of the drone only behind the correct intake vent of the Mavic 2.
   2. Plug the USB part of the cable into your PC or Mac.
5. Launch the DJI Assistant two App on the PC.
6. Click Login on the top right of the App.
7. Login with your DJI Account. If you don’t take one create one using the Sign Up button.
8. Select & Click Mavic 2 on the left side of the Screen.
   
9. Click Upgrade for the available Firmware Packages on the right side of the Screen. If there is more than 1 update available, you can cull which version you want to install. You are able to skip updates if you but want to update to the latest firmware version.
10. Click Offset Upgrade.
11. Look for the firmware package to download onto your computer
12. The Upgrade of your Mavic two’s firmware will get-go after the download is complete.
13. A few notes about the Mavic 2 firmware update process:
    1. It takes around 10-15 minutes.
    2. The Mavic 2 will not Beep, it may restart on its own, so y’all may hear the start-up chime.
    3. Don’t worry if you hear the internal fan power-on. This is normal.
    4. DoNot Remove the USB cable during the update.
    5. It’southward normal for the gimbal to move on it’s own. Be sure that the gimbal clamp is off and nil obscructs it’s total move abilities.
    6. The indicators and condition LED’s may wink abnormally.
    7. The aircraft may reboot on its own.
14. Reboot the Mavic 2 Pro/Zoom after the firmware update is consummate.
15. Check IMU Values in the DJI Get App.

Important Steps after a Firmware Update on your Mavic two:

Launch the DJI Go App while everything is connected (just the Remote Command linked to the drone, no more USB cables). Ensure your settings for Return-to-Domicile fashion are right. Go through any settings that you may have inverse earlier and ensure they are set to your liking. Yous can exam out the camera while you are at information technology.

Updating extra Batteries for your Mavic 2 Pro or Mavic 2 Zoom

Note that there may likewise be an update available for your Mavic 2’s batteries. The bombardment in the drone at the fourth dimension of the update will go updated while doing the normal drone firmware update. If you have extra batteries and they are non updated nevertheless, y’all will get the annoying “inconsistent firmware update found” fault when you pop those batteries in and you are trying to become for a drone flight. To avert these errors in the field be sure to pop each battery into the drone one time the drone and remote control are updated. Sometimes information technology takes a second for the message to pop up.

How to update the Mavic 2 Remote Command

Updating the remote command uses a like procedure as updating the drone, using the in-App (DJI GO 4) method, it will ask you lot to update the remote or the drone and then it will update the other. Using the
DJI Assistant 2 you just adhere the Mavic 2 remote control to your estimator using a USB-A to a microUSB cablevision and adhere the microUSB cable on the left side of the remote command. Just remove the normal cable that attaches to your smartphone and plug the cable which you will connect to the computer in instead. Once you launch the Banana ii you volition choose the Remote Control similar this:

Do yous have bug updating your Mavic 2 Pro or Mavic 2 Zoom?

Sometimes things to work out as yous may programme, if yous are having issues updating your Mavic 2 using either the DJI GO iv App or even using the DJI Assistant two, then let united states of america know in the comments below!

STAY IN TOUCH!

If you’d like to stay up to appointment with all the latest drone/gimbal news, rumors, and reviews, and then follow united states of america on
YouTube,
Twitter
,
Facebook
,
Instagram
 or sign up for ouremail newsletter.

Purchase your adjacent drone directly from
DJI
 or retailers similar
Amazon
. By using our links, we will make a small committee, at no toll to you. Thank you for helping QuadcopterGuide abound!