How to Update Firmware on Konica Minolta

How to Update Firmware on Konica Minolta


Updating the firmware of this automobile

Overview

You can externally download firmware and configuration data of this car to update them.

You lot can proceed using the machine even while downloading firmware or configuration data.

To externally download firmware and configuration data of this machine and update them, follow the procedure shown below.

How to Update Firmware on Konica MinoltaThe firmware and configuration information must be updated by your service representative. For details, contact your service representative.

  1. Fix for downloading a firmware

    supplementary explanationYou can download it either via FTP or HTTP. Configure the proxy server setting co-ordinate to your operating surroundings.

    supplementary explanationFor details on how to configure a setting for downloading firmware via FTP, refer to

    [
    Preparing to download firmware via FTP]
    .

    supplementary explanationFor details on how to configure a setting for downloading firmware via HTTP, refer to

    [
    Preparing to download firmware via HTTP]
    .

  2. Update the firmware of this machine

    supplementary explanationTo update the firmware automatically by specifying the time, refer to

    [
    Updating the firmware automatically at the specified time]
    .

    supplementary explanationTo update the firmware manually, refer to

    [
    Updating the firmware manually]
    .

Preparing to download firmware via FTP

Configure the setting to download firmware to this machine via FTP.

In the administrator fashion, select [Network] – [Motorcar Update Settings] – [Internet ISW Settings] – [FTP Server Setting], and then configure the post-obit settings.

Settings

Description

[FTP Server Setting]

Select [ON] to connect with the Internet via a proxy.

[OFF] is specified by default.

[Proxy Server Address]

Enter the proxy server address.

Apply one of the following formats.

  • Example of host name entry:
    “host.example.com”

  • Example of IP address (IPv4) entry:
    “192.168.one.1”

  • Example of IP address (IPv6) entry:
    “fe80::220:6bff:fe10:2f16”

[Proxy Server Port Number]

If necessary, change the proxy server port number.

[21] is specified by default.

Preparing to download firmware via HTTP

Configure the setting to download firmware to this machine via HTTP.

In the ambassador mode, select [Network] – [Machine Update Settings] – [HTTP Proxy Settings], then configure the following settings.

Settings

Description

[HTTP Proxy Settings]

Select [ON] to establish an external connection via a proxy server.

[OFF] is specified by default.

[Proxy Server Accost]

Enter the proxy server accost.

Use i of the following formats.

  • Example of host name entry:
    “host.instance.com”

  • Case of IP address (IPv4) entry:
    “192.168.ane.i”

  • Example of IP address (IPv6) entry:
    “fe80::220:6bff:fe10:2f16”

[Proxy Server Port Number]

If necessary, modify the proxy server port number.

[fourscore] is specified by default.

[Proxy Hallmark]

Select whether to use Proxy Hallmark.

[OFF] is specified by default.

  • [User Proper name]: Enter the login name used for proxy hallmark (using upwardly to 32 characters).

  • [Password]: Enter the countersign of the user name you entered into [User Name] (using up to 32 characters). To enter (change) the countersign, select the [Password is changed.] check box, then enter a new password.

Updating the firmware automatically at the specified time

This motorcar can download a firmware automatically at the specified time and update the firmware.

In the administrator mode, select [Network] – [Car Update Settings] – [Net ISW Settings] – [Update Firmware at Specified Time], and so configure the following settings.

Settings

Description

[Update Firmware at Specified Time]

Select [Enable] to enable this machine to automatically update the firmware at the specified time.

[Disable] is specified by default.

[Firmware Update Start Fourth dimension]

Enter the time when this machine should update the firmware automatically.

Updating the firmware manually

Externally download firmware to this machine and update the firmware manually.

You lot can keep using the machine as usual while downloading a firmware.

Even so, you cannot use this machine while updating the machine firmware. When the firmware updating process has been completed, this auto reboots automatically.

In the administrator mode, select [Network] – [Machine Update Settings] – [Internet ISW Settings] – [Firmware Update Parameters], then configure the following settings.

Settings

Clarification

[Firmware Download Status]

Displays the status of downloading a firmware.

Clicking [Refresh] refreshes the status.

[Firmware Download]

Click this push button to download firmware externally.

[Delete Firmware]

Click this push to delete the downloaded firmware.

[Firmware Update Parameters]

Click this button to update the firmware of this motorcar using the firmware downloaded.

How to Update Firmware on Konica Minolta

Read:  Samsung Tv Hp-t4254 Cannot Find Firmware on Usb

Check Also

Cara Flash Advan Hammer R3d

Cara Flash Advan Hammer R3d

Cara Flash Advan Hammer R3d Firmware Advan Hammer R3D (Sukses) ´╗┐Assalamu’alaikumSelamat Siang Oke Berjumpa Pun …