How to Update Firmware on Dji Phantom 4 Pro

How to Update Firmware on Dji Phantom 4 Pro

Knowing how to update the DJI Phantom 4 firmware to the latest version is important. These firmware updates contain fixes to solve software bugs, add new features to the quadcopter, gimbal, camera and remote controller.

This commodity has all the instructions, best practices and tips on how to successfully update the firmware on your Phantoms iv. Instructions include upgrading the Phantom 4 Remote Controller, the DJI Go and Banana 2 apps. We also have iii firmware update videos at the bottom.

Too, there are some important tips on what to do if the Phantom 4 firmware upgrade fails during the update procedure.

There are 2 ways to update the Phantom 4 quadcopter.  You tin can update the Phantom 4 with the DJI Assistant 2 or the DJI Go app.  Information technology is as well very easy to update the Phantom 4 Remote Controller using the recommended DJI Go app.


DJI Phantom 4 Firmware Update Information

Each Phantom four firmware update will fix bugs, make improvements or add new features to your quadcopter.

The Phantom 4 Advanced and Phantom four Pro update instructions are the same.  However, the firmware versions are different.  So, make certain that yous download the right firmware for your Phantom 4 quadcopter.


Phantom four Firmware Update Best Practices

A firmware upgrade is a very of import process.  The firmware download and upgrade to the Phantom 4 and RC needs to complete successfully.  The firmware is the critical software, which makes the components on your drone work. So it is vital the firmware update process runs really smooth.

If a firmware download is interrupted or the firmware file is incomplete, then you would have to start the download process all over again.  More than likely, you won’t get the “starting time upgrade” selection with an incomplete firmware file.

If the firmware file is incomplete or corrupt you could harm a component or your drone will just not fly.

With these steps you tin can avoid an unsuccessful firmware update.


Take Your Time

Never be in a bustle to do a firmware update.  The Phantom iv firmware update needs approximately i 60 minutes from start to terminate to be on the safe side.

It is also all-time to update the DJI Apps first, then the remote controller followed past the Phantom four quadcopter. So, bank check for updates for the following;

  • DJI GO App
  • DJI Assistant ii App
  • Phantom 4 / Remote Controller


Recollect Safety And No Disturbance

Give yourself plenty of room and a quiet spot and so you can concentrate without whatever disturbance.  Do non perform firmware update while the aircraft is still flying in the air.  Remove the propellers before starting the firmware process.


Fully Charged Batteries Before Firmware Update

Have at least fifty% in your batteries before starting the update.  The best advice is to accept fully charged batteries in your quadcopter, remote controller and mobile device (cellphone or tablet).


Downloading The Firmware Packet

When downloading the firmware update packet, make certain yous have a very good cyberspace connectedness. You don’t want to loose your internet connectedness while downloading the firmware package.  If you lot do lose the internet connection, it would exist better to starting time the firmware download again.



Updating the firmware file is very important and we need to exist 100% certain that the file downloads correctly.  Plow on Airplane Way on your mobile device so you won’t receive any incoming calls while the firmware is downloading,  or while the Phantom iv is existence updated.

Read:  Dwl-g122 H/w Ver. A.2 Firmware Ver. 1.02


How To Update Phantom four Firmware

At that place are two methods to update the Phantom iv firmware. You can update using the DJI Become app or the DJI Assistant 2 app.  Information technology’s best to have the latest versions of these applications on your smart cellphone or tablet device.

  • DJI Go App Version 4.3.24- Apple IOS
  • DJI Go App Version iv.3.25 – Google Play
  • DJI Banana version 2 v2.0.8


Bank check Settings Afterwards Firmware Update

If you have previously changed settings such as standoff avoidance, maximum flight, horizontal distance or render to habitation altitude etc, check these settings and verify that they are how you want them set.

It is quite possible that the firmware update could put these back to factory settings. This could happen peculiarly if the firmware update was to fix a bug or add new features to the  IMU,
Gyro stabilization systems, flight controller or other related drone components.

It besides may be a very practiced thought to practice aPhantom 4 IMU scale
after the update.


Calibrate The Phantom iv Compass After Firmware Update

After each firmware update, you demand to
calibrate the Phantom 4 compass
again.


Latest Phantom four Firmware Update Version

At the fourth dimension of writing, the latest Phantom 4 firmware version is;

  • Phantom 4 Standard quadcopter firmware version number is v02.00.0700.
  • Phantom four Pro quadcopter firmware version is V 01.05.0600.

Here is the link to the diverse
Phantom four models on DJI’s website. Choose your Phantom four model.  So look for the downloads page.  You will then be able to manually download the latest firmware version.


DJI Phantom 4 Firmware Update Instructions

How To Upgrade Phantom 4 Firmware Hither is the process to upgrade the firmware on the Phantom iv quadcopter and the remote controller.

In that location are 2 means to update the Phantom 4 quadcopter.  You lot tin can update the Phantom 4 with the DJI Assistant or the DJI Go app.  To update the firmware on the Remote Controller, so the DJI Go app is recommended.

Follow the below instructions and spotter the videos at the cease a couple of times.  Take your time doing the upgrade.  Once you lot have completed a firmware update on a number of occasions, and so it will get second nature to you.

Updating the Phantom iv quadcopter is very like shooting fish in a barrel using the DJI Assistant software.  To update the Remote Controller, the recommended option is to apply the DJI Go app.


How To Update Phantom iv Firmware Using DJI Banana

  1. Plug the Phantom iv into your computer using your micro USB to USB cable.
  2. Open up the DJI Assistant 2 software on your laptop.  This Banana 2 software will automatically recognize your Phantom four quadcopter.
  3. Click on the Phantom 4 box to enter the home screen. If there is a new firmware update available it will be marked with a red box.
  4. Click the “Upgrade” push and the application will first to download the latest firmware update from DJI.
  5. When the download is complete the firmware update volition begin automatically. The firmware update will take approximately 15 to 20 minutes.
  6. After the firmware is upgraded, your Phantom 4 will restart automatically.
  7. The Assistant two software should show “Upgrade Successful” later the restart.
Read:  Mz-24 Graupner Where to Tell What Version of Firmware


How To Update Phantom iv Remote Control Firmware

The DJI Go App is the recommended software to update the Phantom iv remote controller. In the DJI Go App, you lot will see an overall status and a notification stating “Firmware Requires Upgrade”. Click on this and information technology volition bring you to the next window where the available updates are listed.

  1. If your Remote Controller has an upgrade bachelor, and so it will exist listed as “RC requires upgrade”.
  2. Click on “Download firmware”.
  3. Next, click on the “Start to Upgrade” button.
  4. You volition hear a beeping sound similar to DDDD DDDD and a blue light on the remote controller as the upgrade is taking place. Y’all will too see the percent going from zero to 100% in the DJI Go app. When it is completed you will come across in the DJI Get app that the “RC upgrade completed”.
  5. Next you lot need to reboot the Phantom 4 Remote Controller.


How To Update Phantom 4 Firmware Using DJI Go App

  1. When a new Phantom 4 update is available, a reddish imprint will appear in the acme of the DJI Get app stating “a new firmware version is bachelor”.
  2. Click on the red banner.  Yous will see an overall condition and a notification stating “Firmware Requires Upgrade”. Click on the “Firmware Requires Upgrade” and it will bring you to the adjacent window where the bachelor updates are listed.
  3. Y’all volition meet “Aircraft Requires Update, download update from DJI Go Home page”.
  4. Tap on the “Download Firmware” which volition download the firmware from the DJI website to your device.
  5. When the download is complete, then adhere your device (tablet, cellphone) to the quadcopter using the USB OTG cable.
  6. Adjacent, click on “Get-go Upgrade” in the DJI Go App. The firmware upgrade volition take approximately 15 to 20 minutes.
  7. At the end of the firmware update, your Phantom iv will automatically restart.
  8. If you refresh your DJI Go App the red imprint will at present disappear.

Now, here are two terrific videos, which have you stride by pace through the Phantom 4 firmware update. The beginning video shows you quickly how to update the firmware. The second video goes into a scrap more particular on updating the Phantom 4 quadcopter and remote controller.

Notation:
If you lot need any components or accessories for your drone, so check out our
DJI Phantom 4 parts, upgrades and accessories
folio.

Here is a slightly longer video on how to update the Phantom four firmware. This has some great tips and best practices.


Phantom iv Firmware Update Trouble & Failure Signs

Here are a few signals, which testify you if the Phantom four firmware upgrade has failed.

  • This firmware is however upgrading after 30 minutes.  The firmware upgrade to the Phantom 4 should only take x to 15 minutes.  The Remote Controller should besides take approximately ten to 15 minutes.
  • A long beeping sound later the firmware has been updating for more than 30 minutes.
  • The DJI Become App is showing less than 100% for the upgrade.


Meridian Article: DJI Phantom 4 Video Tutorials On All Intelligent Flight Modes


What To Do If Phantom iv Update Gets Stuck Or Fails

If the Phantom 4 firmware update fails, try the post-obit.  Delete the downloaded firmware file from your tablet or smart phone. Then download the firmware again.

Read:  Samsung Galaxy S5 (Verizon) Sm-g900v Firmware Update

Brand sure that you downloaded the correct package for your Phantom four and follow the best practices beneath.  Besides before upgrading the Phantom 4 or Remote Controller, the software app (DJI Get / Assistant 2 app) should be up to date.

If the update has failed with the DJI Go app, then try with the DJI Banana two. Be sure to connect your Phantom to the bodily estimator which has the DJI banana on information technology and not from your phone or tablet. One time you lot’ve got information technology continued, you’ll demand to reset your Phantom to its original factory state / setting pre-firmware upgrade failure and so try again to upgrade again.


Phantom iv Firmware Update Benefits

Since the release of the Phantom 4 in the spring of 2016, at that place have been 8 firmware updates. The latest Phantom four Pro firmware update was 2018.03.08.  When DJI release a new quadcopter onto the marketplace, you will generally see new firmware releases every calendar month.  Then every bit all the issues are fixed or less new features been added, then the firmware releases are less frequent.

Here is a list of some of the bugs fixed and new features which the Phantom 4 firmware updates have contained. Yous can find the total listing in the “Phantom 4 Firmware Release Notes” on the Phantom 4 download folio.

  • Optimized photo color and dissimilarity.
  • Stock-still an result that occasionally caused flipped live view when the aircraft braked during flight.
  • Added Pano shooting modes (with DJI Get four v4.one.20 or higher).
  • Optimized GEO Zone Management.
  • Fixed a rare consequence where progress could stall during gimbal auto calibration.
  • Updated No-Fly Zone Management.
  • Optimized No-Fly Zone Return to Home.
  • For increased safety, the flight is restricted to a height of xxx m and distance of l m when not connected.
    or logged into the app during flying, including DJI GO 4 and all apps compatible with DJI shipping.
  • Optimized gimbal performance to improve its stability during flight.
  • Optimized No-Fly Zone Render to Dwelling and unlocking.
  • Improved 4k video recording stability.
  • Add a new characteristic to automatically plow off the Front LED while taking still photos or videos. This features is enabled in the “Photographic camera Settings” section of the DJI GO app.
  • Optimized altitude adjustment logic and so that the Phantom 4 will automatically adapt its altitude according to changes in the terrain while using ActiveTrack (when the quadcopter is flying within ten meters of the ground).
  • New optimized camera and lens spectrum parameters.
  • Much improved propeller baby-sit recognition to reduce the chances of not detection.
  • A modify to the notification tone for gimbal initialization.
  • Reduce the occurrence of sudden altitude drop and the driblet range during flight.
  • Ready for DNG files display outcome in HDR manner.
  • Fix to the photographic camera live view so information technology does not become blurry when using a color profile.
  • Improved encryption for vastly improved security during manual.
  • Optimized takeoff logic for the Phantom 4 when the compass experiences interference.
  • Corrects organisation status information for some batteries.
  • Increase the download speed for photos and videos.

How to Update Firmware on Dji Phantom 4 Pro

Check Also

How to Update Firmware on a Samsung Hd204ui

How to Update Firmware on a Samsung Hd204ui

How to Update Firmware on a Samsung Hd204ui #i What the heck…I just got a …