How to Update Firmware on Baofeng Uv-5r

How to Update Firmware on Baofeng Uv-5r


Baofeng UV-5R.jpg
Baofeng handheld 2 way radios are well known among apprentice radio operators everywhere. Models such as the
UV-3R,
UV-B6,
BF-F9
and the legendary
UV-5R
are a common staple in the mod ham shack, and with good reason. These radios are compact, piece of cake to use, versatile and, all-time of all, extremely inexpensive. They are some of
the virtually affordable amateur radios
on the market. These attributes have fabricated Baofeng a household name in the ham customs.

However, programming a Baofeng radio from a computer isn’t all that intuitive and tin become messy even for the almost experienced ham who is not used to Chinese-fabricated radios. The USB cablevision driver offered by Baofeng is buggy and the programming software made by the manufacturer is, for all intents and purposes, junk.

Fortunately, there are other options available, and one time properly installed, they are really quite good. You lot merely demand to know where to detect these options and how to install them properly. Once that is accomplished, programming is normally a cakewalk.

To detect and install the Baofeng USB Programming Cable driver and programming software correctly, follow the instructions below.
NOTE: follow these instructions completely and in order. Failure to exercise so may only bring more than frustration when things don’t work.

1. To start, the computer should be on and the radio should be off.

two. Locate the correct USB programming commuter for your operating system. Y’all tin download the Prolific driver for Windows, Mac and Linux at
http://world wide web.miklor.com/COM/UV_Drivers.php. If you purchased the
Baofeng UV Series USB Programming Cable
from
Buy Two Way Radios, the driver for Windows volition be on the CD included with the cable in the
USB Cablevision Commuter
folder. Insert the CD and go to
USB Cable Driver > USB Cable Commuter Prolific iii.ii.0.0.exe. This is the correct driver.

Read:  Afterglow Headset Firmware Appears to Be Corupt

3. Install the USB programming cable commuter.
Do NOT connect the USB cablevision at this fourth dimension.

4. Locate the CHIRP Programming Software for your operating system. The latest stable build for Windows XP, vii, viii, MAC and Linux can be downloaded from
http://chirp.danplanet.com/projects/chirp/wiki/Download. It is also included on the
Purchase Two Fashion Radios CD
in the
CHIRP Programming Software
binder. Cull the appropriate folder for your operating system. Install the program
just do not run information technology yet.

five. Plug the USB programming cable into the USB port on your estimator. Plug the other end of the cable into your radio and turn it on.

* Additional steps for Windows *

– There may or may not be a notification later connexion. To verify the connection, bank check the Windows Device Manager. Access to the Device Director will depend on your version of Windows. Once in Device Managing director, click on

Ports (COM and LPT)
. It should be listed every bit

Prolific USB-to-Serial Comm Port (COMX)
. X denotes the COM port number. Annotation the number and write it downwardly if necessary, as y’all volition demand to know information technology when configuring the programming software.

– If there is a yellow triangle with an exclamation mark next to the USB device, Windows did not install the driver correctly. To right the issue, correct-click on the device and choose

Update Commuter Software

on the popular-up menu. Choose

Browse My Computer

to install the driver manually. Cull

Permit me pick from a list of device drivers on my computer
. Choose

Prolific USB-to-Series Comm Port Version: 3.2.0.0

and click

NEXT
. The correct driver should install and the yellowish notification should disappear from the Device Manager. Notation the COM Port number.

Read:  My Fi Hauwei Decode Wifi E5776s-32 Firmware

6. Run the CHIRP Programming Software. Click

Go to Radio

on the menu bar and choose

Download From Radio
. Choose the COM Port number for the USB cable, the Vendor (Baofeng) and the model of the radio (such equally UV-5R) from the drop down lists in the popular-up box. Your radio should be connected to the figurer and CHIRP should now be able to communicate with it.

* Additional Instructions for Windows laptops *

On some laptops, the device manager may indicate the cable is installed correctly, only CHIRP may not detect the COM Port. This may occur if Windows Ability Management is enabled on the device. To activate the cable, get to the Device Manager and right click on

Prolific USB-to-Serial Comm Port (COMX)
. 10 denotes the COM port number. Click

Properties

on the pop-upward bill of fare. Click the

Ability Managemen
t tab. Remove the check from the box adjacent to

Allow the figurer to turn off this device to save power

and click

Use

or

Save
.

To verify the connection, Run the CHIRP Programming Software. Click

Go to Radio

on the carte du jour bar and choose

Download From Radio
. Cull the COM Port number for the USB cable, the Vendor (Baofeng) and the model of the radio (such as the UV-5R) from the drop down lists in the pop-up box. The program should download the frequencies from the radio. When information technology completes the data transfer, the frequency tabular array will appear on the screen. The radio is now fix to program through your figurer.

Read:  Can Samsung Galaxy S5 Use Smart Switch Flash Firmware

As an authorized Baofeng Dealer, we desire installation to exist as like shooting fish in a barrel and painless as possible then you can enjoy your radios for many years to come. If these instructions are followed correctly, you should not have any difficulty connecting the Baofeng radio to your computer. After the initial setup, hereafter connectedness to the computer should be a thing of simply plugging the USB programming cable into your radio and estimator and running CHIRP.


RPC-K1-UF-1.jpg

Note: If you lot followed the installation instructions and are still having trouble, there is now another solution available. The
XLT Painless Programming Cable
installs quickly and hands on computers with Windows XP, Windows 7 and Windows viii. Installation is automatic on many systems with footling or no user interaction required. The
XLT Painless Programming Cable
works with Baofeng, Kenwood, Wouxun and other 2 style radios equipped with standard two pivot Kenwood connectors.

Update: Hear our
review of the Baofeng UV-5R Programming Cable in Episode #82
of
The Two Fashion Radio Show Podcast!

How to Update Firmware on Baofeng Uv-5r

Check Also

How to Update Firmware on Epson 5040ube

How to Update Firmware on Epson 5040ube

How to Update Firmware on Epson 5040ube Epson 5040ube firmware update firmware 2022 Nosotros recommend …