How to Update Firmware in a Lightify Bulb

How to Update Firmware in a Lightify Bulb

The following steps describe the OTA (= Over The Air) firmware update of OSRAM (also known every bit Sylvania) / Ledvance devices (In this instance a smart plug is updated).

On 2020-03-09 Osram (as well known equally Sylvania) has decided to close downwardly server support for smart lamps from the Lightify lighting system within 18 months. This means Osram (besides known as Sylvania) will therefore be shutting down the cloud server for controlling the Lightify gateway on August 31, 2021. And then updating the devices via an Osram lightify gateway will be no longer possible in the near future.

However at that place is a workaround using deCONZ and RaspBee or ConBee as explained beneath.

Requirements:

– Raspberry Pi iii Model B (or B+) or an Raspberry Pi four Model B + Power Supply (at least 2.5A)

– An
RaspBee
Shield or
ConBee USB Stick
phoscon

– 32 GB Micro SD Card (Awarding Class 2)


Steps:

1.) Connect the Osram On/Off Plug via Phoscon/deCONZ equally mentioned
here

two.) Check the deCONZ GUI (via visiting
http://phoscon.de/app) and note the current installed firmware version (and then you know the update worked)

How to Update Firmware in a Lightify Bulb

3.) Download a VNC Tool similar RealVNC Viewer from hither and utilize it to connect to the desktop (User: Pi & Password: raspbeegw; for more info`s run across
here)

4.) Start the deCONZ GUI

5.) Select the standard OTAU plugin via the menu bar in deCONZ via Carte du jour -> Plugins -> STD OTAU Plugin and Switch to the “STD OTAU Plugin” tab on the bottom

Note: If the device you wish comes upwards with Version: 0x00000000 or Epitome: 0x0000 equally seen in my picture press the query button and look some minutes (or remove the plug from the wall socked wait some min and re-plug it)

Read:  How to Tell Which Firmware on a Music Player

6.) Select the device in the list you wish to update (check the MAC Accost) and brand a note from the Image name

7.) Go to the
Ledvance Firmware Update site
(in 2016 Osram sold in that location lamp business and a new company called Ledvance was build to pick that upwards), enter the epitome proper name (in out instance the Plug like written below) and press search, and then Download the latest OTAU file via the button latest and shop that on your PI

8.) Make certain the device is still selected (blue underline), then select the OTAU update file on your PI and press on the update push

9.) deCONZ volition now perform a update from the device

Note: The procedure can take upwards to xv-thirty minutes until completion (the device will restart itself automatically after it finished the update)

10.) Later the device is back, y’all can see that the version number modify from 0x01020490 to 0x01020509

11.) If you open up the deCONZ GUI (via visiting
http://phoscon.de/app) and check at present the version, it should have changed:

Annotation: If the version is still the same, then reset the plug and re-pair information technology. Then the version will be updated.


Notes:

Go on noted that at that place are are tree different Osram Plugs:

1.) The Osram Lightify Plug

Which comes up as:

  • Image: 0x000a
  • Paradigm manufacturer code: 0x110C
  • Node Descriptor advertises manufacturer lawmaking: 0xBBAA

Its unclear if those devices could be updated. As I do not have such a device i besides couldn´t bank check it on my ain.

2.) The Osram Smart+ Plug (Zigbee 3.0?)

Read:  What Does Firmware 1.2 Update on the Nikon S9900

Which comes up as:

  • Epitome: 0x0027
  • Paradigm manufacturer code: 0x110C
  • Node Descriptor advertises manufacturer code: 0xBBAA
  • Known as: Plug01 OnOff MK

on the back is often 1 from the following written:

  • Smart Plug AB32570
  • Smart Plug+ AB3257001NJ
  • Fabricated in China x3419
  • Made in China x2019
  • Made in Mainland china x3118

The older Osram firmware version V1.04.12 and V1.04.90 where successfully updated to the Ledvance V1.05.09

3.) The Osram Ledvance Plug

on the back is ofttimes ane from the following written:

  • Smart Plug AB32570
  • Fabricated in China x3419


Troubleshooting 01:

I had ane device which withal comes up every bit Version: 0x00000000 with Epitome: 0x0000 regardless what I tried. As I was sure its the Osram Smart+ Plug, I load the Ledvance firmware and flashed version V0.20 Build 509. To perform that I pressed ii-3 times the update button until the update started.


Troubleshooting 02:

After the update my Philips HUE wasn´t whatever longer able to detect the devices. I removed them all from the wall charger, waited 2 hours and plugged them in. All my devices could so exist found without any problems. So if you freshly upgraded device isn´t any longer working. Attempt to keep information technology unplugged for +two hours and then try to pair them again.


Known firmware and changes:

Plug01 OnOff MK:

v1.04.12 / 1020412 past Osram

v1.04.90 / 01020490 (2017-08-15?) by Osram

  • Fixed possible malfunction in case of more systems working close
  • Fixed possible cake condition in case of many color change commands in a brusk time
  • Stock-still outcome related to the configuration of the light level and colour reports
  • Increased OTA upgrade reliability
  • Improved conversion between Hue/Saturation and x/y color notation upon colour change commands

01020509/01020510 by Osram

  • Optimized pairing timing
  • Added custom command for enabling/disabling touchlink
  • Fixed issue related to the network joining in multi-hope scenario
  • Improved OTA prototype query mechanism
  • Fixed possible security issue
  • Improved timing identification through touchlink letters
  • Improved lamp brightness on the dynamic scene activation
  • Added custom commands to fix the lamp state later on OTA upgrade and after a ability cycle
  • Fixed wrong lamp behavior switching from color dynamic scene to color temperature dynamic scene
Read:  Return Galaxy Tabpro 8.4 to Stock Firmware

v1.05.09 / 01020509 (14 March 2019) by Ledvance

  • Stack upgrade
  • Improved network performance


Update:

Some users asked if the same is also possible using a windows PC, so here is a small update focusing on a windows PC (meet also here).

one.) Download and install the latest deCONZ Version on your Windows PC (at the moment this is version 2.05.71)

two.) Plug the ConBee USB Stick into your Windows PC

3.) Beginning the deCONZ GUI

iv.) Select the standard OTAU plugin via the bill of fare bar in deCONZ via Carte du jour -> Plugins -> STD OTAU Plugin

5.) Switch to the “STD OTAU Plugin” tab on the bottom

6.) Select the device in the listing you wish to update (check the MAC Accost) and make a note from the Prototype proper noun

seven.) Go to the Ledvance Firmware Update site, enter the image name and printing search [Optional you lot tin endeavor the post-obit original Osram firmware update site]

8.) Download the latest OTAU file via the push button latest and store that on your PC

9.) Make sure the device is yet selected, then select the OTAU update file on your PC and press on update

Note: The process tin can take up to five-10 minutes until completion (the device volition restart itself)

How to Update Firmware in a Lightify Bulb

Check Also

Cara Flash Advan Hammer R3d

Cara Flash Advan Hammer R3d

Cara Flash Advan Hammer R3d Firmware Advan Hammer R3D (Sukses) Assalamu’alaikumSelamat Siang Oke Berjumpa Pun …