How to Update Dji Phantom 4 Firmware
Knowing how to update the DJI Phantom 4 firmware to the latest version is important. These firmware updates contain fixes to solve software bugs, add new features to the quadcopter, gimbal, camera and remote controller.
This article has all the instructions, best practices and tips on how to successfully update the firmware on your Phantoms 4. Instructions include upgrading the Phantom 4 Remote Controller, the DJI Go and Assistant 2 apps. Nosotros also have 3 firmware update videos at the lesser.
Also, at that place are some important tips on what to do if the Phantom 4 firmware upgrade fails during the update process.
There are 2 ways to update the Phantom 4 quadcopter. You can update the Phantom 4 with the DJI Banana two or the DJI Get app. It is too very easy to update the Phantom 4 Remote Controller using the recommended DJI Go app.
DJI Phantom 4 Firmware Update Information
Each Phantom 4 firmware update will fix bugs, make improvements or add new features to your quadcopter.
The Phantom 4 Advanced and Phantom 4 Pro update instructions are the same. However, the firmware versions are different. And then, make sure that you download the right firmware for your Phantom 4 quadcopter.
Phantom four Firmware Update Best Practices
A firmware upgrade is a very of import process. The firmware download and upgrade to the Phantom 4 and RC needs to complete successfully. The firmware is the critical software, which makes the components on your drone piece of work. And then it is vital the firmware update process runs actually shine.
If a firmware download is interrupted or the firmware file is incomplete, and then you would have to start the download process all over again. More than likely, you won’t get the “first upgrade” option with an incomplete firmware file.
If the firmware file is incomplete or corrupt you could harm a component or your drone will just not fly.
With these steps you can avoid an unsuccessful firmware update.
Take Your Time
Never be in a hurry to exercise a firmware update. The Phantom four firmware update needs approximately i hour from start to terminate to exist on the safe side.
It is likewise best to update the DJI Apps beginning, then the remote controller followed past the Phantom 4 quadcopter. And then, check for updates for the following;
- DJI GO App
- DJI Banana ii App
- Phantom four / Remote Controller
Call back Safety And No Disturbance
Give yourself plenty of room and a quiet spot so you can concentrate without any disturbance. Do not perform firmware update while the aircraft is however flying in the air. Remove the propellers before starting the firmware process.
Fully Charged Batteries Before Firmware Update
Have at least 50% in your batteries earlier starting the update. The best advice is to have fully charged batteries in your quadcopter, remote controller and mobile device (cellphone or tablet).
Downloading The Firmware Package
When downloading the firmware update packet, make certain y’all have a very good internet connectedness. Y’all don’t want to loose your internet connection while downloading the firmware package. If you lot exercise lose the internet connexion, it would exist ameliorate to start the firmware download again.
Updating the firmware file is very of import and we demand to be 100% sure that the file downloads correctly. Turn on Airplane Manner on your mobile device so you lot won’t receive whatsoever incoming calls while the firmware is downloading, or while the Phantom 4 is being updated.
How To Update Phantom 4 Firmware
At that place are 2 methods to update the Phantom 4 firmware. You can update using the DJI Get app or the DJI Assistant two app. It’s best to have the latest versions of these applications on your smart cellphone or tablet device.
- DJI Go App Version iv.3.24- Apple IOS
- DJI Go App Version 4.3.25 – Google Play
- DJI Assistant version 2 v2.0.viii
Check Settings Subsequently Firmware Update
If you have previously changed settings such equally collision avoidance, maximum flying, horizontal distance or render to habitation distance etc, bank check these settings and verify that they are how you want them set.
Information technology is quite possible that the firmware update could put these back to factory settings. This could happen especially if the firmware update was to fix a bug or add together new features to the IMU,
Gyro stabilization systems, flight controller or other related drone components.
It too may be a very skillful idea to do aPhantom four IMU calibration
afterwards the update.
Calibrate The Phantom 4 Compass Later on Firmware Update
After each firmware update, you demand to
calibrate the Phantom iv compass
once more.
Latest Phantom four Firmware Update Version
At the time of writing, the latest Phantom 4 firmware version is;
- Phantom 4 Standard quadcopter firmware version number is v02.00.0700.
- Phantom 4 Pro quadcopter firmware version is V 01.05.0600.
Here is the link to the diverse
Phantom four models on DJI’s website. Choose your Phantom 4 model. Then expect for the downloads page. You will then be able to manually download the latest firmware version.
DJI Phantom 4 Firmware Update Instructions
There are two ways to update the Phantom 4 quadcopter. You can update the Phantom 4 with the DJI Assistant or the DJI Get app. To update the firmware on the Remote Controller, then the DJI Go app is recommended.
Follow the below instructions and watch the videos at the cease a couple of times. Accept your time doing the upgrade. Once y’all have completed a firmware update on a number of occasions, then it volition become second nature to you lot.
Updating the Phantom 4 quadcopter is very easy using the DJI Banana software. To update the Remote Controller, the recommended selection is to employ the DJI Go app.
How To Update Phantom 4 Firmware Using DJI Assistant
- Plug the Phantom 4 into your figurer using your micro USB to USB cable.
- Open up the DJI Assistant 2 software on your laptop. This Assistant ii software volition automatically recognize your Phantom 4 quadcopter.
- Click on the Phantom four box to enter the home screen. If in that location is a new firmware update bachelor it volition be marked with a ruddy box.
- Click the “Upgrade” push and the application will commencement to download the latest firmware update from DJI.
- When the download is complete the firmware update will brainstorm automatically. The firmware update will take approximately fifteen to 20 minutes.
- Later the firmware is upgraded, your Phantom 4 will restart automatically.
- The Assistant 2 software should testify “Upgrade Successful” after the restart.
How To Update Phantom 4 Remote Command Firmware
The DJI Become App is the recommended software to update the Phantom 4 remote controller. In the DJI Get App, you will come across an overall status and a notification stating “Firmware Requires Upgrade”. Click on this and information technology will bring you lot to the next window where the available updates are listed.
- If your Remote Controller has an upgrade available, then it will be listed as “RC requires upgrade”.
- Click on “Download firmware”.
- Next, click on the “Start to Upgrade” button.
- Yous will hear a beeping sound similar to DDDD DDDD and a blue lite on the remote controller equally the upgrade is taking place. Y’all will also see the percentage going from goose egg to 100% in the DJI Go app. When it is completed you will run across in the DJI Go app that the “RC upgrade completed”.
- Next y’all need to reboot the Phantom 4 Remote Controller.
How To Update Phantom 4 Firmware Using DJI Become App
- When a new Phantom four update is available, a red banner will appear in the meridian of the DJI Go app stating “a new firmware version is available”.
- Click on the ruby-red banner. Y’all volition see an overall status and a notification stating “Firmware Requires Upgrade”. Click on the “Firmware Requires Upgrade” and it will bring you to the next window where the available updates are listed.
- Yous will see “Aircraft Requires Update, download update from DJI Become Home page”.
- Tap on the “Download Firmware” which will download the firmware from the DJI website to your device.
- When the download is complete, and then adhere your device (tablet, cellphone) to the quadcopter using the USB OTG cable.
- Adjacent, click on “Start Upgrade” in the DJI Go App. The firmware upgrade will take approximately 15 to 20 minutes.
- At the stop of the firmware update, your Phantom 4 volition automatically restart.
- If you refresh your DJI Go App the red banner will now disappear.
Now, here are ii terrific videos, which take you step past step through the Phantom 4 firmware update. The first video shows you quickly how to update the firmware. The second video goes into a chip more detail on updating the Phantom four quadcopter and remote controller.
Annotation:
If you lot demand any components or accessories for your drone, and so check out our
DJI Phantom four parts, upgrades and accessories
folio.
Here is a slightly longer video on how to update the Phantom 4 firmware. This has some great tips and best practices.
Phantom 4 Firmware Update Problem & Failure Signs
Here are a few signals, which prove you if the Phantom iv firmware upgrade has failed.
- This firmware is all the same upgrading later on xxx minutes. The firmware upgrade to the Phantom iv should simply take ten to 15 minutes. The Remote Controller should also take approximately x to 15 minutes.
- A long beeping sound subsequently the firmware has been updating for more than than 30 minutes.
- The DJI Become App is showing less than 100% for the upgrade.
Height Article: DJI Phantom 4 Video Tutorials On All Intelligent Flying Modes
What To Practice If Phantom 4 Update Gets Stuck Or Fails
If the Phantom 4 firmware update fails, try the post-obit. Delete the downloaded firmware file from your tablet or smart phone. So download the firmware once again.
Brand sure that y’all downloaded the correct packet for your Phantom 4 and follow the best practices below. Also before upgrading the Phantom 4 or Remote Controller, the software app (DJI Go / Assistant 2 app) should exist upwardly to appointment.
If the update has failed with the DJI Get app, and then try with the DJI Assistant two. Be sure to connect your Phantom to the actual computer which has the DJI assistant on information technology and not from your phone or tablet. One time you’ve got information technology connected, you’ll demand to reset your Phantom to its original factory state / setting pre-firmware upgrade failure and and so endeavor again to upgrade again.
Phantom 4 Firmware Update Benefits
Since the release of the Phantom 4 in the jump of 2016, there have been eight firmware updates. The latest Phantom iv Pro firmware update was 2018.03.08. When DJI release a new quadcopter onto the market place, you will generally see new firmware releases every month. And so as all the issues are fixed or less new features been added, then the firmware releases are less frequent.
Hither is a list of some of the bugs fixed and new features which the Phantom 4 firmware updates have contained. You tin observe the full listing in the “Phantom 4 Firmware Release Notes” on the Phantom 4 download page.
- Optimized photo color and contrast.
- Fixed an result that occasionally caused flipped live view when the aircraft braked during flight.
- Added Pano shooting modes (with DJI GO 4 v4.1.twenty or higher).
- Optimized GEO Zone Direction.
- Fixed a rare issue where progress could stall during gimbal auto calibration.
- Updated No-Fly Zone Management.
- Optimized No-Fly Zone Return to Home.
- For increased safety, the flight is restricted to a height of thirty m and distance of 50 k when not connected.
or logged into the app during flying, including DJI Go 4 and all apps uniform with DJI aircraft. - Optimized gimbal performance to meliorate its stability during flight.
- Optimized No-Wing Zone Render to Dwelling house and unlocking.
- Improved 4k video recording stability.
- Add a new feature to automatically turn off the Forepart LED while taking still photos or videos. This features is enabled in the “Photographic camera Settings” section of the DJI Get app.
- Optimized distance adjustment logic so that the Phantom 4 will automatically conform its altitude according to changes in the terrain while using ActiveTrack (when the quadcopter is flying within 10 meters of the basis).
- New optimized photographic camera and lens spectrum parameters.
- Much improved propeller guard recognition to reduce the chances of non detection.
- A change to the notification tone for gimbal initialization.
- Reduce the occurrence of sudden altitude drop and the drop range during flight.
- Fix for DNG files display result in HDR mode.
- Fix to the photographic camera live view so information technology does not become blurry when using a colour contour.
- Improved encryption for vastly improved security during transmission.
- Optimized takeoff logic for the Phantom four when the compass experiences interference.
- Corrects system status information for some batteries.
- Increase the download speed for photos and videos.
