How to Update Android Firmware From Sd Card

How to Update Android Firmware From Sd Card

Z7_3054ICK0KGTE30AQO5O3KA30N0



hp-concentra-wrapper-portlet



How to Update Android Firmware From Sd Card

Actions

Updating the Android Operating Organisation Using a Recovery Image on Your HP Slate 7 Farthermost Tablet (Android)

This certificate applies to HP Slate seven Extreme tablets with Android operating organisation.

HP provides OTA (over-the-air) updates for the Android operating arrangement on your tablet. When your tablet is connected to the Net, updates download automatically and prompt you to install. If y’all received and installed the updated Android iv.four/KitKat operating system over the air, you do not need to employ this document to update your tablet. To check for OTA updates and see which version of Android is currently installed on your tablet, refer to the HP support certificate
Installing OTA (Over-the-Air) Android Operating System Updates on Your HP Slate 7 Extreme Tablet (Android).

An operating system update does not destroy the data or settings y’all have saved on the tablet.

If needed, utilise a microSD card to manually install an updated version of Android on your tablet, using the steps in this certificate. If you cull to update manually, Slate vii Farthermost tablets require a two-part update:
The tablet must exist updated to Android 4.iii/Jelly Bean before updating to Android four.4/KitKat.

This document describes how to manually update the operating system on your tablet using a microSD carte du jour.



caution:

You must update the tablet from Android 4.2/Jelly Bean to Android 4.3/Jelly Bean before y’all can update to Android 4.4/KitKat. Follow the instructions in this document in the exact lodge they announced.

Before you begin

Before starting the Android operating organisation update process, you lot need the post-obit:

  • MicroSD memory card: You need a microSD carte with 1GB or more capacity. All information is erased from the card when you create the software update media. Back upwardly any files currently stored on the retentivity card before y’all begin.

  • MicroSD-to-SD retentiveness card adapter and SD card reader: You need a retention card adapter and bill of fare reader to create the software update media on your computer.

  • Admission to another reckoner: Yous need a figurer with Internet access to download the software images and create the Android update media.

Stride 1: Creating the Android update media for Android 4.3/Jelly Bean

The update media is a system file (called a “software image”) stored on a microSD retentivity card. Later on the update media is created, use the retentiveness card to load a new version of the Android operating arrangement on your tablet.

Utilize the steps in this section to create software update media that yous tin use to update your tablet from Android 4.2/Jelly Bean to Android iv.3/Jelly Bean.

  1. Insert the microSD carte in the SD card adapter, and then insert the adapter into the SD carte reader in your computer.

  2. Format the microSD bill of fare using the FAT32 file organization.

    note:

    If y’all need instructions for formatting the card, search the Internet using the term “format memory bill of fare fat32” plus your operating system (for example, search for
    format retentivity card fat32 Windows 7).

  3. If prompted to enter your model number, do the following:

    1. Enter the model proper noun for your HP tablet (slate 7 extreme).

    2. Click
      Go.

    3. You may need to select a product number from a list earlier y’all tin can access your product support page. If and so, select your product number from the list.

    4. From your product support site, click
      Drivers.

  4. On the Drivers page, select your operating system from the drib-down menu, and so click
    Next.

  5. Click the plus (+) sign next to
    Software – Solutions.

  6. Click the
    Version 10
    Google Android Jelly Bean Restore Prototype.

  7. Click
    Download.

    Figure
    : Download software paradigm file


    Download software image file

  8. Save the update.zip file (software update epitome) to your microSD card. Do not unzip or rename the file.

    Effigy
    : File download (Windows 7 example)


    File download (Windows 7 example)

    Figure
    : Save to microSD card (Windows 7 case)


    Save to microSD card (Windows 7 example)

  9. When the download is complete, close the window, and then remove the memory card from the menu reader.

    Effigy
    : Download complete (Windows seven example)


    Download complete (Windows 7 example)

    The software update media is fix to use in the tablet.

Pace 2: Entering recovery fashion and installing Android 4.3/Jelly Bean

Use the software update media yous created in Footstep 1 to install Android 4.3/Jelly Bean on your tablet, using the following steps:

  1. Fully accuse the tablet, and and then disconnect the charging cable from the tablet.

  2. With the tablet powered off, insert the update media microSD carte du jour into the bill of fare reader, located on the right edge of the tablet.

    Figure
    : Inserting a microSD card


    Inserting a microSD card

  3. Press and hold the
    volume up
    button and
    power
    button at the same time.

  4. When an HP logo and bootloader carte du jour appear on the screen, release the buttons.

  5. In the bootloader card, apply the
    volume down
    button to curl down to
    Recovery Kernel.

    note:

    The bootloader carte du jour displays for only a few seconds. If yous do not make a pick from the bill of fare, the tablet reboots or shuts downward. Echo steps 3 and iv to return to the boot carte du jour.

    note:

    The affect screen is disabled when the tablet is in recovery mode. Employ the
    volume upwards
    and
    volume down
    buttons to navigate up or down in the bootloader menu and the recovery carte. Use the
    ability
    button to make a option.

    Figure
    : Recovery Kernel


    Recovery Kernel

  6. With Recovery Kernel highlighted, printing the
    power
    button to select.

  7. Later on a few seconds, an Android graphic appears with the bulletin
    No command. Hold down the
    power
    push and briefly press the
    volume up
    button at the same time.

  8. When the Android system recovery menu appears, use the
    volume down
    push button to highlight
    utilize update from external SD carte du jour.

    Figure
    : apply update from external SD card


    apply update from external SD card

  9. Press the
    power
    button to select.

  10. Use the
    volume down
    button to highlight the software image file:
    update.zip.

    Figure
    : update.nil


    update.zip

  11. Press the
    power
    button to select the file and brainstorm the update.

  12. Wait for the update process to complete. When the message
    Install from sdcard consummate
    appears on the screen, remove the microSD card from the card reader.

  13. With the option
    reboot system at present
    highlighted in the organisation recovery menu, press the
    power
    push button to restart the organisation.

    Figure
    : reboot system now


    reboot system now

  14. The tablet restarts. Await while installed apps are optimized for the new version of Android.

    Figure
    : Optimizing apps


    Optimizing apps

    The initial update process is complete, and Android iv.three/Jelly Bean operating arrangement is installed on the tablet. Continue to Step 3 to create new update media, and update the tablet to Android four.4/KitKat.

Step iii: Creating the Android update media for Android iv.4/KitKat

The update media is a organisation file (called a “software image”) stored on a microSD retention bill of fare. After the update media is created, apply the memory carte du jour to load a new version of the Android operating system on your tablet.

Use the steps in this section to create software update media that you can utilise to update your tablet from Android 4.3/Jelly Edible bean to Android four.iv/KitKat.

  1. Insert the microSD card in the SD card adapter, and then insert the adapter into the SD carte reader in your computer.

  2. Format the microSD carte du jour using the FAT32 file system.

    note:

    If you need instructions for formatting the card, search the Net using the term “format memory card fat32” plus your operating arrangement (for instance, search for
    format memory card fat32 Windows seven).

  3. If prompted to enter your model number, do the following:

    1. Enter the model proper noun for your HP tablet (slate seven extreme).

    2. Click
      Go.

    3. You may demand to select a product number from a list before you can admission your product support page. If so, select your product number from the list.

    4. From your product back up site, click
      Drivers.

  4. On the Drivers page, select your operating organisation from the drib-downward menu, and and so click
    Next.

  5. Click the plus (+) sign adjacent to
    Software – Solutions.

  6. Click the
    Version xiii
    Google Android Jelly Edible bean Restore Image.

  7. Click
    Download.

  8. Relieve the update.zip file (software update image) to your microSD bill of fare. Practise not unzip or rename the file.

    Figure
    : File download (Windows 7 example)


    File download (Windows 7 example)

    Figure
    : Save to microSD card (Windows 7 example)


    Save to microSD card (Windows 7 example)

  9. When the download is complete, close the window, and and then remove the retentiveness card from the card reader.

    Effigy
    : Download consummate (Windows vii example)


    Download complete (Windows 7 example)

    The software update media is fix to use in the tablet.

Step iv: Entering recovery mode and installing Android 4.4/KitKat

Use the software update media you created in Pace 3 to install Android 4.4/KitKat on your tablet, using the following steps:

  1. Fully charge the tablet, and so disconnect the charging cable from the tablet.

  2. With the tablet powered off, insert the update media microSD card into the card reader, located on the right edge of the tablet.

    Figure
    : Inserting a microSD menu


    Inserting a microSD card

  3. Press and concord the
    volume up
    button and
    ability
    button at the same time.

  4. When an HP logo and bootloader menu appear on the screen, release the buttons.

  5. In the bootloader menu, utilize the
    volume downward
    button to scroll downwardly to
    Recovery Kernel.

    note:

    The bootloader menu displays for only a few seconds. If you exercise not make a selection from the menu, the tablet reboots or shuts down. Repeat steps 3 and iv to render to the kicking menu.

    note:

    The bear on screen is disabled when the tablet is in recovery mode. Apply the
    volume upward
    and
    volume downwardly
    buttons to navigate up or down in the bootloader card and the recovery carte du jour. Use the
    power
    button to make a selection.

    Figure
    : Recovery Kernel


    Recovery Kernel

  6. With Recovery Kernel highlighted, press the
    ability
    button to select.

  7. After a few seconds, an Android graphic appears with the bulletin
    No command. Hold downwardly the
    power
    button and briefly printing the
    volume up
    button at the same time.

  8. When the Android organisation recovery bill of fare appears, employ the
    volume down
    button to highlight
    apply update from external SD card.

    Effigy
    : use update from external SD bill of fare


    apply update from external SD card

  9. Press the
    power
    push to select.

  10. Employ the
    volume downwards
    button to highlight the software epitome file:
    update.cypher.

    Figure
    : update.zip


    update.zip

  11. Press the
    power
    button to select the file and brainstorm the update.

  12. Wait for the update process to complete. When the message
    Install from sdcard complete
    appears on the screen, remove the microSD card from the carte reader.

  13. With the selection
    reboot system at present
    highlighted in the arrangement recovery menu, press the
    power
    button to restart the organisation.

    Figure
    : reboot arrangement now


    reboot system now

  14. The tablet restarts. Wait while the optimization process is finished.

    annotation:

    The tablet may seem unresponsive while the installation is existence finalized.

    Effigy
    : Optimizing apps


    Optimizing apps

    The update process is consummate, and Android 4.iv/KitKat operating system is installed on the tablet.

How to Update Android Firmware From Sd Card

Read:  Latest Drivers and Firmware for Surface Pro

Check Also

Samsung Gsm Sm-j337t Firmware “J337tuvs4asd1” for Odin

Samsung Gsm Sm-j337t Firmware “J337tuvs4asd1” for Odin

Samsung Gsm Sm-j337t Firmware “J337tuvs4asd1” for Odin Cheetah Tool Characteristic Cheetah Samsung Tool Read Info, …