How to Reset Printer After Refill Ink Epson
If your Epson printer is reporting that your ink cartridge is empty afterwards y’all’ve refilled information technology, you’ll need to reset its chip. Even if you didn’t refill the cartridge, at that place’s normally a bit of ink left in the “empty” cartridge that you tin but utilise if you reset the chip. This wikiHow teaches you lot how to reset your Epson ink cartridge chip using a cartridge chip reset tool, paperclips, or by swapping chips with another cartridge.
-
i
Go the right cartridge fleck reset tool.
A cartridge reset tool is a plastic device with pins that, when inserted into the pinholes on your cartridge, reset the fleck inside. The pins on the reset tool must line up with your cartridge’southward holes, which are on the bottom or side edge. Dissimilar models’ cartridges have different numbers and arrangements of pivot holes. To find the right bit reset tool, search the web for “Epson cartridge chip reset tool” along with the exact model of your printer (e.g., WT-7620).- Near cartridges have either 7 or 9 pinholes in a cluster. Compare a picture of the pins on the reset tool to the number and system of pinholes on the bottom of your print cartridge before purchasing.
- If you don’t see a cluster of pinholes, await for a small green microchip somewhere on the cartridge—it volition either have one single pinhole only above or below it, or two round metallic contacts at the height or bottom.
[1]
In this case, see the
Using a Paperclip
method. - “Universal” scrap reset tools are NOT universal for all models—some tools marked as “Universal” have 7 pins, while others accept ix.
-
two
Remove the empty ink cartridge from your Epson printer.
Advertizing
-
3
Line up the ink cartridge with the marks displayed at the base of the bit reset tool.
Each chip reset tool is uniquely shaped to accommodate ink cartridges from unlike Epson printer models. -
4
Press the pins on the reset tool firmly into the chip contact holes.
The LED on the cartridge tool may blink several times to indicate that a connexion is being fabricated. This depends on the reset tool you lot purchased. -
five
Remove the fleck reset tool when the LED turns green.
In one case the light on the reset tool goes solid, you lot can disconnect the tool. Your Epson ink cartridge chip is at present reset and ready for use.
Ad
-
1
Locate the pinhole(s) or contacts on your cartridge.
You can use a paper clip to reset your Epson cartridge chip if there’s a single pinhole on the small green microchip on the bottom or side of the cartridge. If in that location are two round metal contacts at the top or bottom of the chip, you’ll actually demand two paperclips.- If you take a cluster of vii to 9 pinholes instead, run into
this method.
- If you take a cluster of vii to 9 pinholes instead, run into
-
2
Straighten out one or 2 paperclips.
The goal is to accept near an inch or and so of direct-ish paperclip that you tin can easily insert into the contact hole (or two paperclips, if yous accept dual metal contacts on your cartridge).
[2]
-
3
Reset a cartridge with i pinhole.
Insert the finish of the paperclip into the pinhole. Press down gently so the pin lies flat against the metallic contact inside for a few seconds, and and then remove the paperclip. This should reset your cartridge. -
4
Reset a cartridge with 2 metal contacts.
Lay the cartridge on a flat surface then the chip is facing upwards—you’ll need both easily to use the 2 paperclips at the same fourth dimension. Then, place the ends of the extended paperclips confronting the ii metal contacts at the same time.
[iii]
Later y’all’ve held metal against the contacts for a few seconds, the cartridge chip volition reset.
Advertising
-
i
Remove both the colour and black ink cartridges from your Epson printer.
If you ran out of either color or black ink and you lot’re in a pinch, you tin can remove the chip from your other cartridge and insert it into the one that registers as empty. This will fob the “empty” cartridge into thinking it has every bit much ink as the other cartridge.- This will only work if the flake in the other cartridge is non also out of ink.
- You can also use a chip from another matching cartridge for your model.
-
2
Use a unmarried-sided razor blade to remove the chips from each cartridge.
On most models, you’ll do this by slipping the razor edge beneath the chip and gently lifting it from the cartridge.
[4]
On other models, you may have to trim away excess plastic from the top mail service of the ink cartridge that is holding the flake in place starting time.- Be sure to go on track of which chip came from which cartridge—if y’all put the same scrap dorsum into the aforementioned cartridge, the scrap will not reset.
-
three
Identify the new chips into each cartridge.
The chips will pop back into place hands. This will play a trick on your printer into thinking the empty cartridge is now full, based on how much ink exists in the other cartridge. -
4
Identify both ink cartridges back into your Epson printer.
If your printer has an Ink Modify button, press it later re-inserting the cartridges. If not, await until the printer scans and recognizes the “new” ink levels, which tin take about 90 seconds.
[5]
- If you have an Ink Change button, printing it again once the printer is set before you continue.
-
5
Remove both ink cartridges from the printer.
At present you’ll be reinserting the original chips into each cartridge—this ensures that both cartridges register as having the same level of ink. -
6
Swap the fries so each chip is back in its original cartridge.
-
seven
Reinsert the cartridges.
If you have an ink alter push, press information technology over again. If not, wait another 90 seconds or then for the printer to recognize the cartridges and annals the ink levels. Both the black and colour ink cartridges now reflect the aforementioned levels of ink, and you can get more ink out of the empty cartridge Epson had originally requested that you supercede.
[6]
Advertising
-
Question
Volition a chip resetter work on an Epson cartridge? It won’t office if the ink cartridge is non genuine.
I take not seen a chip resetter for many current models. For example, my XP440 cannot swap chips and no resetter tool is available.
-
Question
How can I tell if my Epson has a chip resetter?
The printer cannot reset the chip; there is a tool which resets the flake on the cartridge.
-
Question
Is there a reset bit tool for an Epson xp-440 cartridge?
No there are no resetter tools available and the chips volition not swap either.
-
Question
How do I reset my epson ink cartridge chip?
Exercise as the above states – if you don’t have the cartridge reset tool, y’all can use a paperclip. All the higher up is showing y’all how to reset the chip. Note that if you tamper with it too much, the software may put the printer into a “lockdown” fashion, so be conscientious.
Ask a Question
200 characters left
Include your email address to go a message when this question is answered.
Advertising
-
Consider purchasing refill cartridges made by other manufacturers that are uniform with your Epson printer. Some refill cartridges comprise automatic reset chips that can back up up to several refills before the purchase of a new cartridge is required.
-
Endeavor placing new batteries in the chip reset tool if the device does non calorie-free upwards when pressed confronting your ink cartridge. When the lights on the flake reset tool fail to illuminate, either the batteries have died, or the device is not uniform with your ink cartridge fleck.
Advertizement
Most This Commodity
1. Search for your model of Epson printer along with “cartridge fleck reset tool.”
2. Purchase the reset tool.
3. Align the pins on the reset tool against the pinholes on the cartridge.
four. Insert the tool and wait until the LED lights upwards and stays solid.
5. Remove the tool and reinsert your cartridge.
Did this summary assist you?
Cheers to all authors for creating a page that has been read 183,129 times.
