How to Remove Ink From Epson Printer

This wikiHow teaches you how to supercede old cartridges in an Epson printer with new ones. Removing old cartridges and installing new cartridges is pretty straightforward in all Epson printer models. Make sure to install your new cartridges immediately after removing the one-time ones to prevent the impress head nozzles from drying out.

ane

Turn on your printer.
Brand sure your printer is connected to a power source and turned on earlier replacing your ink cartridges.
ii
Open up the printer cover.
Yous’ll detect your printer’s impress caput and ink cartridge unit inside the printer cover.
- If you’re using a printer with an integrated scanner unit, y’all may demand to elevator the unabridged scanner unit of measurement. In this case, brand sure to lift the whole scanner unit, and not just the scanner cover.
Advertisement
three
Check the LCD screen on your printer (optional).
If your printer has an LCD screen, you’ll see a message on your printer’south LCD screen when your cartridges are low.
- If your cartridges are low or depleted, you will demand to select the cartridges you want to replace, and select
  OK
  here.
- If you’re replacing a cartridge before you a meet a message, open the
  Setup
  card, select
  Maintenance, and select
  Ink Cartridge Replacement.
4
Wait for the print head to stop at the replacement position.
The print caput volition automatically move and stop at the replacement position.
- On some models, you may have to press and hold the maintenance button to move the print head to the replacement position. This push will wait like a droplet and a paper sheet, or an upside-down triangle in a cerise circle.
- Practise not motion the impress head by head. This may damage your printer.
5

Open the cartridge cover (if applicative).
Some printer models will accept a plastic encompass around the impress head’southward ink cartridge unit of measurement. In this case, open up the cartridge clamp to access your ink cartridges.
6

Squeeze the tab on the back of the cartridge.
Y’all’ll find this tab on the back of each cartridge. It will permit yous to lift the cartridge from the print head.
seven

Lift the cartridge straight up to remove information technology.
While squeezing the tab on the back, pull the cartridge direct up to remove it from the print caput. It will slide out easily with a little fluctuant at most.

Advertisement

Read: Install Hp Deskjet 1050 Printer Without Disk

1

Gently shake the new cartridges before opening the package.
Brand certain to gently milkshake the new cartridges four or five times before opening the new cartridge packet.
two

Remove the new cartridge from the package.
Open the new cartridge’s packaging, and carefully remove the new cartridge.
3
Remove the yellow record from the cartridge.
Y’all’ll discover a yellow record on your new ink cartridges. Remove this tape before installing the cartridge in your printer.
- Depending on your printer and cartridge model, the xanthous tape may be on the dorsum, side, top or lesser of the cartridge.
- Do non remove any other labels or seals from the cartridge. This may cause ink to leak.
4

Insert the new cartridge into the holder.
Place the new cartridge on the empty cartridge socket, and push information technology downward until it clicks into the print head.
v
Close the printer cover.
When y’all’re washed installing your new cartridges, close the printer comprehend. The print head will automatically prime the new cartridges, and move to its home position.
- If you have a separate cartridge embrace, brand sure to close the cartridge cover earlier closing the printer cover.
- If you’re using a printer with a scanner unit, you’ll need to lower the entire scanner unit to close the printer cover.
half dozen
Press the maintenance button (optional).
On some models, you will have to printing the maintenance push button on your printer to consummate the cartridge replacement process.
- The maintenance button looks like a droplet and a paper sheet, or a ruby-red, upside-down triangle in a circumvolve.
- On some models, you may have to select
  Check
  or
  OK
  on the printer’s LCD screen.
Advertisement

Read: 1 Toner Printer Fuji Xerox Cp115w Bisa Brp Lembar

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Thanks for submitting a tip for review!

If your printer model has a different cartridge functionality or doesn’t lucifer up with whatsoever of the steps hither, make certain to refer to your printer’southward user manual for your model’s precise instructions.

Well-nigh This Article

Article Summary
Ten

ane. Plow on your printer.

ii. Check the LCD screen or press the maintenance button.

3. Open the printer cover.

4. Clasp the tab on the cartridge’southward dorsum, and lift information technology up.

5. Gently shake the new cartridge, and remove it from the package.

half dozen. Insert the new cartridge into the printer head until it clicks.

seven. Close the printer cover.

viii. Check the LCD screen or press the maintenance button.

Did this summary assist you?

Thanks to all authors for creating a folio that has been read 24,232 times.