How to Install Older Firmware Into Dji Phantom 3

How to Install Older Firmware Into Dji Phantom 3


DJI drops new firmware for Phantom 4 RTK drone



How to Install Older Firmware Into Dji Phantom 3

DJI has released a new firmware update for its most compact and accurate low-altitude mapping solution, the Phantom four RTK drone.

The DJI P4 RTK is an intuitive surveying solution, capable of capturing centimeter-level data to create georeferenced second maps and 3D models of project sites. The drone is controlled using the DJI GS RTK app that comes with multiple planning modes, including photogrammetry (2D and 3D), waypoint flying, terrain awareness, and cake partition. The Jan 2022 firmware update increases the capabilities of this app through new features and optimizations. Here are the complete details…

What’s new in DJI Phantom 4 RTK firmware update?

The latest P4 RTK firmware update released by DJI is called v02.02.0607. Look for this number while updating both the shipping as well every bit the remote controller and D-RTK ii Mobile Station, if y’all use one. It’due south of import to update them all, or else they will not work together. Your DJI GS RTK app, meanwhile, should be updated to v2.2.0-GSP.

The firmware v02.02.0607:

  • Adds manual timed shooting in DJI GS RTK to provide continuous shooting with certain time intervals.
  • Adds support to group manually shot photos in DJI GS RTK. When “Manual Photo System” is enabled in the app, manually shot and manually timed photos will exist stored in the survey folder also as the PPK data.
  • Adds prompt in DJI GS RTK to recommend using RTK positioning when performing terrain-following operations.
  • Adds aircraft status prompts in DJI GS RTK.
  • Optimizes UI of settings in DJI GS RTK.
  • Fixes the issue of Cloud PPK not being activated with activation code in some scenarios.
  • Fixes the rare result of customized RTK network connection failing in some scenarios.
Read:  How to Load Firmware Into Tegra 2

Practise note that you lot will not be able to downgrade the drone to v02.02.0503 or a lower version subsequently this firmware update. DJI besides says that using this firmware with a version of DJI Terra older than v2.0. is not recommended, as some functions will not work properly.

Also read:
DJI will finish providing back up for these products from March 2022

How to update DJI Phantom 4 RTK drone firmware

You can update the P4 RTK firmware in the
DJI Assistant 2
for Phantom. The DJI GS RTK app tin also exist used to update the firmware of both the aircraft and remote controller. Hither’s a step-by-step guide on how to do this:

  1. Power on the remote controller and the aircraft. Ensure that the remote controller has access to the internet.
  2. Connect the USB-C port on the remote controller to the Micro USB port on the aircraft via a USB-C OTG cable and a Micro USB cable.
  3. There will be a prompt on the lower right corner in the DJI GS RTK app if there is new firmware. Tap the text to enter the firmware folio.
  4. Select the desired firmware and tap Update to enter the firmware information page.
  5. Tap Download v02.02.0607 to download the firmware bundle for all the devices.
  6. When the download is consummate, tap Update v02.02.0607 under each device to enter the update folio for the corresponding device, so tap Install and await for the update to complete.
  7. Afterwards successfully completing the update, restart the remote controller and the shipping manually.

Note that the bombardment level should exist above 30% for the firmware update.

Read:  Alcatel One Touch Fierce Xl Firmware Update Metropcs

The remote controller and the aircraft will restart automatically during the firmware update. Be certain to go on the connectedness between the remote controller and the aircraft. Do not operate them manually until the app indicates installation is completed.

Too, the remote controller may get unlinked from the aircraft later on the firmware update. Relink the remote controller and aircraft if necessary.

Read more:
DJI Mobile SDK now supports Mini ii, Mini SE, Air 2S drones


Subscribe to DroneDJ on YouTube for exclusive videos

How to Install Older Firmware Into Dji Phantom 3

Check Also

How to Update Firmware on a Samsung Hd204ui

How to Update Firmware on a Samsung Hd204ui

How to Update Firmware on a Samsung Hd204ui #i What the heck…I just got a …