How to Install New Firmware on Router

Navigating through a router’s multitude of menus and configuration settings can exist confusing, especially given the obtuse documentation typically bundled with the device. Installing 3rd-party open up-source firmware on your home router not merely streamlines a router’south graphical user interface simply too adds robust functionality, such as a new easy to employ GUI, a bandwidth usage monitor, and the power to boost the forcefulness of your wireless signal. Upgrading your router’s firmware is not as complicated as it may seem; here are the steps to getting a powerful, fully customizable, steroid induced home network.

Steps

ane
Verify that your router is compatible with the new firmware.
- The firmware that will be covered in these instructions is Love apple, since it is easily the most feature packed firmware available. There is a list of uniform routers available to Love apple’s website
  http://www.polarcloud.com/tomato. Pay close attention to the electric current firmware version of your router as newer versions of some routers may non be supported.
2

Download the latest firmware from

Tomato’due south website

(either .7z or .zip format).

Advertisement
3

Unpack it to a directory of your choice using a programme such as

winrar
.
4

Access your router’s settings with an Internet browser (the default IP is 192.168.1.1).
5

Click the Administration tab, then Firmware Upgrade.
vi

Click Browse and navigate to the unpacked firmware binder in the directory yous chose earlier.
vii

Choice the matching firmware type for your router—the Love apple package includes different versions of the firmware for different router models.
8

Hit Apply and wait while your router’s firmware is flashed.
Don’t disconnect ability to the router during this upgrade.
ix

One time the upgrade is finished, become dorsum into the router configuration (firefox is recommended) and you’ll exist greeted with the new interface.
That’s it, the newest version of Tomato automatically migrates all of your router settings so you don’t have to reconfigure your network.
10

Optional:
To boost your router’due south wireless signal, get to the Advanced menu and select the Wireless section. From at that place, yous can adjust the router’s “Transmit Power” value to whatsoever number between 1mW and 251mW (default is 42mW). Setting a value higher than 70mW is non recommended.

Advertizement

Add New Question

Question

How can I find out if a third party cable company is doing this with my router?

I retrieve it’s unlikely that the cablevision company would update your router, especially if it’southward non leased from them or built into a modem/ router combination that’s leased from them. If you take the default router ID and countersign, you can alter it to a non-default that the cable company doesn’t know — that will go along them from doing updates. You can besides become into your router configuration advanced tab and practice a firmware update yourself so you can be sure your firmware is straight from the manufacturer.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertising

If your previous username and password don’t work, try using “admin” (without the quotes) for both username and password to go in.
Increasing a router’s transmit ability will increase it’southward horizontal range while decreasing it’southward vertical range, so increasing this value may not be suitable if there are many stories of a edifice that need to be connected.

Cheers for submitting a tip for review!

Advertizing

Upgrading your router’s firmware does come up with a slight hazard of damaging your router or voiding the warranty on it. Use at your own risk.
Don’t disconnect power to the router during the firmware upgrade process.
Setting your router’s transmit power to higher than 70mW may cause it to overheat possibly causing permanent damage the router. Although user’s have reported using 100mW and above.

Things You’ll Need

A Router
- Linksys WRT54G v1-v4, WRT54GS v1-v4, WRT54GL v1.10, WRTSL54GS.
- Buffalo WHR-G54S, WHR-HP-G54, WZR-G54, WBR2-G54, WBR-G54, WZR-HP-G54, WZR-RS-G54, WZR-RS-G54HP, WVR-G54-NF, WHR2-A54-G54, WHR3-AG54
- Asus WL500G Premium (no USB support), WL500GE, WL520GU
- Sparklan WX6615GT, Fuji RT390W, Microsoft MN-700
Newest Version of
Love apple’s Firmware.
A computer with access to the network
Ambassador’s username and password for the router.

How to Install New Firmware on Router