How to Install Emulex Hba Firmware and Drivers on Esxi 6.5 Hosts

How-do-you-do there, everyone!

This post talks well-nigh
the procedure of upgrading the firmware of an Emulex FC HBA on VMware ESXi.

Delight have a look below to detect more than details on this topic.

Source: https://www.pinterest.com/pin/862228291136971844/

Outcome DESCRIPTION

A method for upgrading the Emulex FC HBA firmware needs to be provided for a customer site.

ISSUE ANALYSIS

Currently, the Huawei support website provides no guide on the Emulex FC HBA firmware upgrade and the firmware needs to be downloaded from the Emulex website.

The following describes how to upgrade the firmware of an LPe16000 HBA on VMware ESXi 6.0.

The firmware update for Broadcom/Emulex HBA using the ELXFLASH Standalone Utility on ESXi 6.x Organisation.

1 alternative for applying firmware updates on Broadcom/Emulex HBAs in ESXi 6.x systems is via using the Broadcom/Emulex el wink Standalone utility.

The following procedure shows how to update an LPe16000 HBA from xi.4.143.23 version firmware to 11.iv.204.20 version firmware in an ESXi 6.0 organization.

1. Download the elxflash Standalone utility from the Broadcom website.

I): Get to link below and then select Elxflash Standalone Utility for ESXi.

https://world wide web.broadcom.com/products/storage/fibre-channel-host-bus-adapters/lpe16000b#downloads

II): Select Elxflash Standalone Utility for ESXi (in this case the version is 11.four.142.eighteen-3).

2. Obtain the firmware file from either the Broadcom Website (for Broadcom/Emulex-branded HBAs) or from the OEM supplier of the Broadcom/Emulex HBA

In this instance, for the LPe16000 HBA, that file volition be lancer_A11.4.204.20.grp.

iii. Pick out a directory and place the elxflashStandalone-esxi-11.4.142.18-three.zip kit in it (in this example /scratch was used on this system – actual volume will vary between systems)

~ # cd /scratch

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc # ls -l

total 5188

drwxr-xr-x i root root 8 May 9 2017 Emulex

drwxr-xr-10 1 root root 8 May nine 2017 core

drwxr-xr-10 1 root root 8 May 9 2017 downloads

-rwx—— i root root 3476760 December 12 xiii:06 elxflashStandalone-esxi-11.4.142.18-iii.cypher

drwxr-xr-x one root root viii Dec 26 14:33 log

drwxr-xr-ten 1 root root 8 May ix 2017 var

drwxr-xr-x 1 root root viii Dec 19 xv:34 vsantraces

4. Unzip the elxflashStandalone-xxxxxxxxx kit and you will meet a directory of the same proper noun as the kit appear.

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc # ls -50

total 5188

drwxr-xr-x i root root 8 May 9 2017 Emulex

drwxr-xr-x i root root eight May nine 2017 core

drwxr-xr-x one root root 8 May 9 2017 downloads

drwxr-xr-x 1 root root 8 Dec 12 13:07 elxflashStandalone-esxi-xi.4.142.xviii-3

-rwx—— 1 root root 3476760 December 12 xiii:06 elxflashStandalone-esxi-eleven.4.142.18-iii.nada

drwxr-xr-10 1 root root 8 Dec 26 14:33 log

drwxr-xr-x 1 root root viii May 9 2017 var

drwxr-xr-10 1 root root viii Dec 19 15:34 vsantraces

v. Change the directory to be that new directory elxflashStandalone-ESXi-11.4.142.xviii-3.

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc # cd elxflashStandalone-esxi-i

1.4.142.18-three/

6. Annotation the three directories in the elxflashStandalone-xxxxxxxxxx directory.

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc/elxflashStandalone-esxi-11.4.142.18-3 # ls -l

total 768

drwxr-xr-x one root root 8 December 12 13:07 boot

drwxr-xr-x 1 root root 8 Dec 14 16:55 esxi

drwxr-xr-x 1 root root 8 December 13 15:11 firmware

7. Note the firmware file – identify the firmware file that you want to update in this directory.

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc/elxflashStandalone-esxi-eleven.4.142.xviii-3 # cd firmware

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc/elxflashStandalone-esxi-xi.4.142.18-3/firmware # ls -l

full 13526

-rwx—— one root root 10859108 Dec 12 14:20 lancer_A11.4.204.20.grp

8. Change the directory to the esxi directory – note the elxflash.sh script file.

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc/elxflashStandalone-esxi-11.4.142.18-iii # cd esxi

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc/elxflashStandalone-esxi-11.four.142.xviii-3/esxi # ls -l

total 298

-rwx—— 1 root root 20498 December 12 thirteen:07 elxflash.sh

drwxr-xr-ten 1 root root 8 Dec 12 xiii:07 i386

-rwx—— 1 root root 20498 Dec 12 13:07 linlpcfg.sh

-rwx—— one root root 1 December fourteen sixteen:55 log.log

9. Note: ./elxflash /h or ./elxflash /? will list all commands for the utility

x. Run the command ./elxflash.sh /q to get a list of discovered HBAs on the host – annotation the firmware version of 11.4.142.23 for the LPe16000 HBA.

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc/elxflashStandalone-esxi-11.4.142.18-3/esxi # ./elxflash.sh /q

HBA=LPe16000, Port Type=FC, WWN=10:00:00:ninety:FA:1C:C7:F4, PCI ID=E200, VID=10DF, SSID=E205, SVID=10DF, Firmware=11.4.142.23, Boot Code=11.iv.142.23, Boot Enabled=1

HBA=LPe12002, Port Type=FC, WWN=10:00:00:00:C9:7E:EB:2A, PCI ID=F100, VID=10DF, SSID=F100, SVID=10DF, Firmware=UD202A3, Kicking Lawmaking=UU503A2, Kick Enabled=ane

HBA=LPe12002, Port Type=FC, WWN=10:00:00:00:C9:7E:EB:2B, PCI ID=F100, VID=10DF, SSID=F100, SVID=10DF, Firmware=UD202A3, Boot Code=UU503A2, Boot Enabled=1

HBA=LPe12000, Port Blazon=FC, WWN=10:00:00:90:FA:3C:78:6F, PCI ID=F100, VID=10DF, SSID=F100, SVID=10DF, Firmware=UD202A3, Kicking Lawmaking=UU700A1, Boot Enabled=ane

elxflash: All required queries succeeded – Return Code=0

Note:
./elxflash /h or ./elxflash /? will list all commands for the utility.

xi. Now execute the ./elxflash.sh /auto/update command – this will update the HBAs which are capable of receiving the firmware resident in the /firmware directory listed in pace One thousand.

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc/elxflashStandalone-esxi-xi.iv.142.18-three/esxi # ./elxflash.sh /auto /update

Tue Dec 12 xiv:26:39 2017

HBA=LPe16000, Port Type=FC, WWN=10:00:00:90:FA:1C:C7:F4,

Update=Firmware, Paradigm=lancer_A11.iv.204.20.grp, New=11.4.204.20, Old=11.four.142.23, Status=Success

elxflash: All required updates succeeded – Render Code=0

12. Using the ./elxflash.sh /q command again, note the new firmware version installed on the LPe16000 HBA.

/vmfs/volumes/591238f4-f3f8e9cf-98d0-c81f66ea3ecc/elxflashStandalone-esxi-eleven.iv.142.18-3/esxi # ./elxflash.sh /q

HBA=LPe16000, Port Type=FC, WWN=10:00:00:90:FA:1C:C7:F4, PCI ID=E200, VID=10DF, SSID=E205, SVID=10DF, Firmware=xi.4.204.twenty, Boot Code=11.4.204.twenty, Boot Enabled=1

HBA=LPe12002, Port Type=FC, WWN=10:00:00:00:C9:7E:EB:2A, PCI ID=F100, VID=10DF, SSID=F100, SVID=10DF, Firmware=UD202A3, Kicking Lawmaking=UU503A2, Kick Enabled=1

HBA=LPe12002, Port Type=FC, WWN=x:00:00:00:C9:7E:EB:2B, PCI ID=F100, VID=10DF, SSID=F100, SVID=10DF, Firmware=UD202A3, Boot Code=UU503A2, Boot Enabled=1

HBA=LPe12000, Port Type=FC, WWN=x:00:00:xc:FA:3C:78:6F, PCI ID=F100, VID=10DF, SSID=F100, SVID=10DF, Firmware=UD202A3, Kick Lawmaking=UU700A1, Boot Enabled=1

elxflash: All required queries succeeded – Render Code=0

SOLUTION Clarification

Upgrade the firmware every bit described above.