How to Flash Firmware on Mecool Hm8
You should upgrade or use an
alternative browser.
[V1][S905X][ROM][Android Television 9][TESTING] Mecool ROM PORT for Generic S905X Devices
-
Thread starter
DiogoSilva48 -
Start engagement
Hello anybody. Since my last experiment with booting the Mi Box S ROM, I’ve been searching a mode to boot other ROM’south from other devices. I needed a way hands change the DNR (Denoiser) and then I could amend video quality on apps like Disney+ and I needed a way to become Auto Framerate Switch to get that shine playback, so I found this Mecool KM1 ROM (yes, with S905X3) and I was able to boot information technology on my S905X device.
The performance of this ROM is bang-up for me, DNR and Picture options are available, in that location’due south an easy way to ROOT it and you can justinstall AFRD app to get Auto Framerate Switch.
This is where it gets tricky, my box has a S905X CPU with a QCA9377 and works perfect hither. For at present I don’t have whatsoever other boxes to examination but I’ll be working hard with my friend
@aidanmacgregor
to bring more back up, I also need your feedback to figure things out.
How To Install
Use Amlogic USB Burn Tool with a Male person to Male person USB Cable to flash the ROM, connect to the TV and wait until it boots up.
How To Root
Download the Temporary TWRP and Super SU files linked bellow and copy them to an SD Card or USB Drive.
Enable ADB Debugging on developer settings. Find your box IP Adress, for this you lot tin can go to the About Settings folio and about.
Employ a tool like “Minimal ADB Fastboot”, connect your device through ADB and employ the command “adb reboot recovery” to go to the recovery.
From this recovery install the temporary TWRP zip, afterwards that you lot’ll be booting to TWRP, from there you lot need to select USB or SD card, from in that location you lot just select the SuperSU zip.
Restart the box and you’ll be rooted.
What’s next
You tin expect updates to this ROM.
I have plans to bring ROOT and AFRD pre-installed if in that location’s popular demand for it.
I’m also working on getting Android x to boot on S905X when I can get some more than gratuitous time out of college.
Because using Telegram and so we can exchange some ideas together.
I also really demand your feedback and opinion.
Downloads
ROM:
https://drive.google.com/file/d/10_xGTOOjn7d_X7JkkmHyTRQlV6zOeOWc/view
TWRP and SuperSU fastened bellow.
Big thanks
Cheers to
@aidanmacgregor
for helping to sort out the unpacking and repacking of the ROM and for working with me for the side by side update.
Cheers to @ sagert from Freaktab forum for the Root method.
Thank you to @ ViT for the TWRP he provided.
Thanks to
@Ricky Divjakovski
for the Amlogic Tools he provides.
Attachments
Dainty one lad more options for these devices is e’er crawly!
have to make a rom compatible with tv box HK1 TV S905X3
Really ignore the terminal request. I have managed to root my device afterwards muddling through the adb over network. Thanks once again for the fantastic ROM
Tin can it be solved somehow?
What that support for amlogic s905x-bv android vi.0.i ( zte hg680p )
Correction..
Information technology’southward not ZTE HG680P..
But, Fiberhome HG680P..
Correction..
Information technology’s not ZTE HG680P..But, Fiberhome HG680P..
hullo, i believe this device ia actually manufactured past ZTE and only rebadged as fibrehome, i call back this device wont work, seems to not like generic roms
hi, i believe this device ia actually manufactured past ZTE and just rebadged every bit fibrehome, i recollect this device wont work, seems to not like generic roms
Is that and so??
And if i may inquire,
At present my HG680P is running Marshmallow (rooted)
What can i practice to upgrade from marshmallow to Pie or at least Nougat..
UBT process stopped at vii% (later “download meson1” then state “formatting”, and fail/stopped right there)
As my friend have a HG680P unit which is running stock Android Pie (from manufacturer)..
And is already run rooted Pie now..
Nosotros practice cross-cheque both device, and it’due south plough out both device is identical..
Is that and then??And if i may ask,
At present my HG680P is running Marshmallow (rooted)
What tin can i practice to upgrade from marshmallow to Pie or at to the lowest degree Nougat..
UBT process stopped at 7% (subsequently “download meson1” then state “formatting”, and fail/stopped right there)As my friend have a HG680P unit of measurement which is running stock Android Pie (from manufacturer)..
And is already run rooted Pie at present..We do cross-check both device, and it’s plow out both device is identical..
there are several versions of this device v1. v2. v3 v4 etc, with diffrent hardware inside i call up
Tested on A95X B7N (905x one/eight Realtek 8616 or 8618 – can’t recall), some observations:
ane. Operation is quite expert
2.Wifi does non work
3. Original remote supplied with box does not work. Nonetheless a generic remote from a erstwhile S805 MXQ box (512 ram) works perfectly
4. EAC3 Sound does not output anything through Plex, regardless of Sound settings (incl. Avant-garde) or Plex settings (common for my box at least, workaround possible).
v. HDR works.
Herkese merhaba. Mi Box S ROM’u başlatmayla ilgili son denememden beri, diğer cihazlardan diğer ROM’ları başlatmanın bir yolunu arıyordum. Disney+ gibi uygulamalarda video kalitesini iyileştirebilmek için DNR’yi (Denoiser) kolayca değiştirebilecek bir yola ihtiyacım vardı ve bu pürüzsüz oynatmayı elde etmek için Otomatik Kare Hızı Anahtarını almanın bir yoluna ihtiyacım vardı, bu yüzden bu Mecool KM1 ROM’u buldum (evet, S905X3 ile) ve onu S905X cihazımda başlatmayı başardım.
Bu ROM’un performansı benim için harika, DNR ve Resim seçenekleri mevcut, KÖK yapmanın kolay bir yolu var ve Otomatik Kare Hızı Anahtarı almak için sadece AFRD uygulamasını yükleyebilirsiniz.
Donanım Desteğiİşte işin zorlaştığı yer burası, kutumda QCA9377’li bir S905X CPU var ve burada mükemmel çalışıyor. Şimdilik test edecek başka kutum yok ama daha fazla destek getirmek için arkadaşım
@aidanmacgregor
ile çok çalışacağım, ayrıca bazı şeyleri halletmek için geri bildiriminize ihtiyacım var.Nasıl kurulur
ROM’u flaş etmek, Telly’ye bağlamak ve açılana kadar beklemek için Erkek – Erkek USB Kablosu ile Amlogic USB Burn Tool’u kullanın.
Nasıl Köklenir
Aşağıda bağlantısı verilen Geçici TWRP ve Super SU dosyalarını indirin ve bir SD Karta veya USB Sürücüye kopyalayın.
Geliştirici ayarlarında ADB Hata Ayıklamayı etkinleştirin. Kutu IP Adresinizi bulun, bunun için Ayarlar Hakkında sayfasına ve hakkında gidebilirsiniz.
“Minimal ADB Fastboot” gibi bir araç kullanın, cihazınızı ADB üzerinden bağlayın ve kurtarmaya gitmek için “adb reboot recovery” komutunu kullanın.
Bu kurtarma işleminden geçici TWRP cypher dosyasını yükleyin, bundan sonra TWRP’ye önyükleme yapacaksınız, oradan USB veya SD kartı seçmeniz gerekiyor, oradan sadece SuperSU zip dosyasını seçiyorsunuz.
Kutuyu yeniden başlatın ve kökleneceksiniz.
Sıradaki ne
Bu ROM için güncellemeler bekleyebilirsiniz.
Popüler talep olursa, ROOT ve AFRD’yi önceden yüklenmiş olarak getirmeyi planlıyorum.
Ayrıca, üniversiteden biraz daha boş zaman bulabileceğim zaman, Android 10’united nations S905X’te açılmasını sağlamaya çalışıyorum.
Birlikte fikir alışverişinde bulunabilmemiz için Telegram kullanmayı düşünüyoruz.
Ayrıca görüşlerinize ve fikirlerinize gerçekten ihtiyacım var.İndirilenler
ROM:
https://drive.google.com/file/d/10_xGTOOjn7d_X7JkkmHyTRQlV6zOeOWc/view
TWRP ve SuperSU ekli körük.
Çok teşekkürler
@aidanmacgregor‘a ROM’un paketten çıkarılması ve yeniden paketlenmesine yardımcı olduğu ve bir sonraki güncelleme için benimle birlikte çalıştığı için teşekkürler.
Root yöntemi için Freaktab forumundan @ sagert’eastward teşekkürler.
Sağladığı TWRP için @ ViT’ye teşekkürler.
Sağladığı Amlogic Araçları için
@Ricky Divjakovski‘a teşekkür ederiz.
merhaba Diego mecool ki pro için de bir rom yapabilir misin?
Thanks for your efforts!Tested on A95X B7N (905x ane/viii Realtek 8616 or 8618 – can’t recall), some observations:
1. Performance is quite expert
ii.Wifi does not work
three. Original remote supplied with box does not work. However a generic remote from a old S805 MXQ box (512 ram) works perfectly
iv. EAC3 Audio does not output annihilation through Plex, regardless of Sound settings (incl. Avant-garde) or Plex settings (mutual for my box at least, workaround possible).
v. HDR works.
I’ve the same box and had the same experience .Swell tip on generic remote ,works a care for. Tried atvxperience beta v5 ROM all good simply once more no wifi
edit:
tried, and yes, this rom tin can kick coreelec (adb reboot update), and we tin can even dual boot coreelec on internal retentivity using “ceemmc -x” !
rom looks ok, but live channels crash immediately when trying to use PIP.
Whatever solution?
I am sorry, I forgot nearly this ROM. I tin’t update it anymore, my S905X box’south eMMC storage died concluding year and I bought a new Chromecast w/ Google TV, so, I accept no way to exam and develop whatsoever s905x ROM’s anymore.
Uma pena Brother, essa rom tinha tudo pra ser uma das melhores.
Similar threads