How to Fix Horizontal Lines on Epson Printer

Learn how to prepare horizontal banding with these iv steps.

E’er sent a job to print, only to have to rush to cancel information technology considering of lines going across the print, ruining the image?

These lines, which are typically left in the direction of printhead travel, are referred to as
horizontal banding.

It’s a fairly common problem, and one that many people don’t immediately accept a solution to. Nosotros thought it time to write a quick post to assist in solving that dilemma.

What Does Banding Look Like?

The novice printmaker may non have a specific name for the issue. I’ve heard: bands, banding, horizontal banding, weird white lines in my print, and many more.

They might look like pinstripes on a shirt, or the flickering of an old CRT monitor. Whatever proper noun you give them, these lines are not welcome on your print!

Check these out. Don’t be frightened, they’re merely examples. Your printer is OK.

How to Prepare Horizontal Banding

Hither is a personal checklist that I run through if I offset to see banding on my own prints (god forestall!) or if I’grand lending a hand to someone else in need.

1) Run a nozzle check – Nozzle checks can actually tell a story! Wait at it closely.

2) If you see line breaks in the nozzle check, run a caput cleaning bike.

Technical Note:
I like to apply a loupe (search amazon if you need one) to check for small
breaks in the lines. I likewise like to exercise this on a smooth paper, rather than something similar canvas, so I can accurately appraise the test print. Frequently times, if a nozzle bank check looks perfect, that is a fair indication that yous may want to look at your impress settings rather than continuing to investigate on the hardware side of things.

iii) If all lines are solid, determine how long it’s been since a printhead alignment has been performed. Depending on printer usage,
I typically run a printhead alignment every vi-12 months. If yous’re outside this window, I suggest that be your next step.

Technical Note:
If your printer has multiple “levels of intensity” options available for this, take into account how many breaks you run into thus how bad the clogging may exist. The higher level of head make clean you perform, the more ink yous are spitting out (wasting) in attempt to clear the clog.

4) Do a small test print to determine if the horizontal banding is still present.
In your print settings, be sure you are: using the correct ICC profile and proper media blazon setting. Other than a clogged printhead nozzle or misaligned printhead, an incorrect media type setting is commonly the next particular in the list of causes for banding.

Technical Notation:
Within your printer driver comes a set of media types (Watercolor Newspaper Radiant White, Canvas Matte, Premium Sleeky
Photograph Newspaper, etc) which contain a lot of information and specifications every bit to what the printer should do. Amongst these pre-defined settings are things like ink limits, newspaper feed adjustment, platen gap/head height, and paper thickness. You’ll want to make certain you’re selecting the proper media blazon setting for the paper or canvas you are press on, because if ane or more than of these settings is far from what it should be, banding (or other impress-related problems) can arise.

What We Learned

While banding tin can be caused past a whole host of various things – software and hardware related akin – this trouble tin can often be solved using the above checklist.

Hey, I have read your commodity and I’m still stuck!

No worries.

Drop a photo of the trouble in the comments below and nosotros’ll help you out with getting to the lesser of it!