How to Disable Privacy Separator on Brother Printer

Check the following points before you connect your Brother machine to your wireless network.

• Configuring the Brother machine for a wireless network using Wi-Fi Protected Setup or AOSS™.
  
• Configuring the Brother machine manually for a wireless network.
  
• Function settings of your WLAN access point
  
• IP accost allocation

Configuring the Brother machine for a wireless network using Wi-Fi Protected Setup or AOSS™

If your WLAN access bespeak/router supports either Wi-Fi Protected Setup or AOSS™, you lot tin hands connect your Brother machine to your wireless network without a computer.
To confirm if your WLAN access point/router support the WPS or AOSS™, cheque if the WLAN access point/router has the WPS or AOSS™ symbol as shown below.

Configuring the Blood brother machine manually for a wireless network

Before configuring wireless settings, you will need to know your Network name: (SSID, ESSID) and Network Key.

Do one of the following to find the Network Proper noun (SSID, ESSID) and Network Key:

• See the side of your WLAN access point/router.
  NOTE: The illustration shown below may differ depending on the product being used.

  

• See the documentation provided with your WLAN admission point/router.
• The initial Network Name could be the manufacturer’south name or the model name.
• If you still cannot observe the security information, consult the manufacturer of your WLAN admission point/router, your arrangement administrator or internet provider.

WPA-PSK/WPA2-PSK is one of the network authentication methods which utilize a Pre-Shared Central (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.

Function settings of your WLAN access point

Depending on the WLAN access point being used, some functions of WLAN access indicate/router may cause interference to wireless advice between your computer and the Brother automobile. Run across the instructions supplied with your WLAN access point/router and confirm your role settings. If the following functions are enabled, change the setting.

• Multiple SSID
  
  This function allows you to configure multiple SSIDs with one WLAN access point/router. Each SSID can use unlike authentication and encryption methods so that you lot can connect wireless devices to the wireless network at different security levels at the same time. Nonetheless, if yous want to connect all wireless devices to a specific wireless network, these devices take to use the same SSID. In many cases, devices using unlike SSID cannot communicate with each other, and cannot send or receive data through the same wireless network.
  Configure your wireless figurer and Brother machine with the same SSID as used for your WLAN admission signal/router.

  Notation: The analogy shown below may differ depending on the product being used and the encryption methods are one instance.

  

• Privacy Separator
  
  Privacy Separator isolates all wireless devices continued to your WLAN admission signal/router, and prevents the wireless devices from being able to connect and transport information to other devices in your wireless network.

  When Privacy Separator is on, wireless devices such as your computer and your Brother machine will not be able to communicate with each other.
  To connect your Brother motorcar to the other devices, modify the setting of your WLAN access point/router and disable Privacy Separator.

  

• MAC address filtering
  
  MAC accost filtering is a part that allows just specific MAC address configured in the WLAN access signal/ router to connect.
  If yous are using MAC address filtering in the WLAN admission point/ router, you demand to configure your MAC address of your Blood brother machine.

  You tin find your machine’s MAC Accost by printing the Network Configuration List.
  > Click hither to see the details of how to print the Network Configuration List.

IP address allocation

• Assigning Static IP addresses
  
  Earlier you assign the IP address manually using Static way, read the following.
  The IP address which y’all wish to assign to your Brother Machine:
  • Must exist selected from outside the range of the IP address that might exist assigned as a dynamic accost by DHCP server.
  • Must be different from the one that has been already assigned to some other device in your network.
  • Must be on the same network as your computer and the WLAN access signal/router.

  If the IP address assigned to your figurer is 192.168.ane.xx, assign any number which has not assigned to other devices to where twenty is (e.g. 192.168.1.10). The first three series of numbers (192.168.1 every bit shown in the example) must be the aforementioned.

• Assigning IP address automatically
  
  If your WLAN access point/router does non back up a DHCP server function, the IP accost can not exist automatically configured. For more information, see the documentation supplied with your WLAN access indicate/router.