How to Copy Firmware From an Xiao Fang

How to Copy Firmware From an Xiao Fang

Recently I take been looking into more and more Xiaomi devices and being pleasantly surprised at every stage. The products are ever nifty quality and so cheap. The simply problem I run into, especially with the home devices, is the way Xiaomi likes to restrict access to some devices to cathay. In the past the workaround has been simple, set the app to people’s republic of china and Xiaomi will plow a blind eye. However, with firmware version 5.half-dozen.2.197 this changed for me on my Xiaofang camera.

How to Copy Firmware From an Xiao Fang

I establish many guides for downgrading the firmware on my device but most did not work with this new firmware. I finally found a guide that worked
(Thank you junyang96!) however it was missing a stride at the end and was posted before the update that broke my device so it nevertheless took me a long time to figure out exactly how to get it operating once more and if this would piece of work.

Afterward much messing I take a working Xiaofang bargain camera on firmware which should, theoretically, continue working forever as long as I do not update.

Here is all the steps I took to become my device back to working order:

Please do this at your own gamble. I cannot guarantee it will work and not cause any impairment to your device, this is just what worked for me

  1. Format a microSD to Fat32 ( Mine was a 16GB one but I assume you could use a smaller size)
  2. Download the firmware hosted
    here. That file sharing site is blocked in the UK and mayhap elsewhere and then I have likewise hosted a download link
  3. Copy the downloaded file “demo.bin” onto the SD card root (The very first page when opening the SD)
  4. While the Xiaofang camera is not plugged into power, insert the SD carte
  5. Hold downwardly the reset push and plug the camera into power. Concur the button for 15 seconds and and so release (The LED should be flashing orange and blue at this point)
  6. Wait for xxx seconds then press the set up button and go through the normal app pairing setup procedure.

    Note : My app pairing did not become smoothly. I was having issues with the photographic camera connecting to the router but just keep trying if you are having bug. After around iii/v attempts I got in that location.

    Important - The app will pair completely yet you lot will not be able to view your camera at this signal. With this new firmware, if you lot tap on the photographic camera in app information technology will get stuck on connecting (1/30). When yous are at this phase please move onto the side by side footstep

  7. Tap on the camera in app. While it states “Connecting (i/3)” tap on the iii dots in the acme right
  8. Tap “Full general settings” > “Check for firmware updates”
  9. The screen should state “Current version v.six.2.77 Latest version”. Tap “Update”

    Notation : This was not polish either, it took x or so attempts later turning the camera off and on once again and closing the app and opening once again etc. Eventually the update was allowed and processed equally usual.

  10. After the update is consummate, the app should piece of work equally usual. Make sure your “Region” is all the same “China” and exercise not update the firmware of your camera and yous should exist able to go on enjoying your cheap upkeep wireless camera.

I hope this solved some issues. Every bit I said in the guide information technology was not smooth and I cannot promise this volition work for every 2019 Xiaofang block just It certainly worked for mine. Over again thanks to junyang96 who wrote the original guide and translated from the Chinese site.

Delight drop me a message if you have any questions about this guide and I will endeavor to help.

How to Copy Firmware From an Xiao Fang

Read:  How to Reset Wrt 1900 Ac Firmware

Check Also

Form 2 Touchscreen Not Working After Firmware

Form 2 Touchscreen Not Working After Firmware

Form 2 Touchscreen Not Working After Firmware Hello, To help yous out, yous can cheque …