How to Connect Epson L3110 Printer to Phone

How to Connect Epson L3110 Printer to Phone


Background

Bluetooth is a standard for wirelessly connecting together peripheral devices such as personal
computers, printers, etc. It can be used to easily network together not only personal computers,
but a variety of devices as well.

Bluetooth also uses information encryption and random frequency switching engineering science to attain a
high level of security and preclude data interception.

Bluetooth Networking iPad iPhone Printer

A variety of devices can be used to connect with a Bluetooth Printer

Bluetooth uses a chief/slave device relationship to create what is chosen a piconet. One device within the piconet network is the master device (also called the host) that generates a frequency hopping pattern. A maximum of vii slave devices can participate in a single network.
A slave device can also participate in another different piconet. In addition, the primary device of one piconet tin human action as a slave device for a different piconet. The TM-P60 is a defended slave device.

The Bluetooth communication range is approximately ten meters. The actual communication range differs depending on the surrounding radio wave environment, objects of interference, and the setup location. Brand sure to sufficiently examination the communication range when setting upwards a network.

The procedures for connecting the host device to the TM-P60 using Bluetooth are detailed below. The TM-P60 uses SSP (Serial Communication Protocol) to create the Bluetooth connexion. Both a Bluetooth-compatible PDA and a Windows based estimator are used as examples for connecting an EpsonTM-P60 via Bluetooth. In order to print, you must install a printer application on the PDA or reckoner.


one  Installation Steps

  1. Install and Enable Bluetooth on the PDA/tablet/computer (host device)
  2. Pair the printer with the host device
  3. Install the driver or application on the host device


2  Bluetooth Connection



2.i Bluetooth Connection Overview
Follow the PDA Bluetooth setup tool instructions for setup operations. One instance is indicated below. Use your host device transmission for actual operations.



Steps for connecting a PDA to a portable printer


Since the output of Bluetooth radio waves is limited, communication tin be affected by the setup location, direction installed, other devices in the area, etc., which may disrupt or decrease the speed of communication. As a result, make sure to thoroughly bank check device operation prior to using.


Plant the Bluetooth connexion past using the PDA’s Bluetooth setup tool. Gear up up the connectedness past following the direction indicated by this tool.


Steps to Setup

2.2 PDA/Computer Preparation
Ready a Bluetooth-compatible PDA or Calculator to human action as a Host.

The required operating environment is indicated beneath:
❏ Uniform with Bluetooth Ver.1.1
❏ Uniform with SPP (virtual serial connection)
❏ The user must provide and install the actual print awarding.


2.three Turning printer power on
Check that a paper gyre is loaded and that power is beingness supplied to the device; press the power button.
Note: If a serial cable (OT-RS60) is connected when the printer power is turned on, wireless communication functions will be disabled. Make certain to remove any serial cables before turning power on.

2.four Starting the Bluetooth Setup Tool
Start upward the Bluetooth setup tool from the PDA/Computer setup screen. Continue setup in accordance with this tool’s instructions.

2.5 Detecting Communication-ready Bluetooth Devices
Use the Bluetooth setup tool to discover nearby devices. The PDA searches the immediate area for
other devices that can be connected via Bluetooth. If a advice-ready TM-P60 is detected, the TM-P60 device name is displayed. The default name is “TAIYO SPP.”
Notation: The device proper name may differ. Refer to the self-exam print results (encounter below). If multiple devices tin can be connected, those device names will exist listed.

2.6 Entering the Passkey
Input a passkey when the Bluetooth setup tool displays an input screen. Refer to the self-test print results for the passkey. The default setting is “4254.”
Note: The device name and passkey may differ. Refer to values shown in the self-test print results.
Some devices may time out if y’all take besides long to enter the passkey. If this occurs, enter the passkey and
return to the previous stride to fix.

2.7 Confirming the profiles that can be used
Use the Bluetooth setup tool to ostend the Bluetooth profiles that can be used. The TM-P60 supports only “SPP” (virtual serial communication).
Note: “Service” may exist displayed every bit the contour.


2.8 Completing the Bluetooth Connectedness
The Bluetooth connexion is complete in one case all setting are completed with the Bluetooth setup tool.
One time communication with a device has been established, some PDAs and Computers add together a connection icon to their screen. This allows the user to re-establish connection past clicking the icon.

In Windows open up the Bluetooth Settings tab to check to encounter that the device is listed and registered.



Taiyo SPP
is the default name of the TM-TP60 Printer


Making Adjustments

This printer is able to be adapted by the post-obit means:
❏ DIP switch (handshake of serial communication weather condition)
❏ Memory switch (buzzer on/off, status notification, serial communication weather condition, paper gyre width, print density, Bluetooth passkey and device name, other)
❏ Roll newspaper width (58mm / 60mm)
Adjusting the spacer and retentivity switch
❏ Change the Bluetooth passkey and device name.
The current settings can be confirmed past a self examination. (Run into “Self exam style” below.)
Annotation: When you adjust these items, nosotros recommend you to ostend the new settings. You can confirm the settings by running a self-test.

ii.nine How to Confirm Current Settings
You can use a cocky-test to confirm the current settings (see below).

ii.10 DIP switch
This printer has DIP switches 1~4. These are located as shown in the figure below.
1. Make certain the printer is turned off.

2.11 To access the DIP switches, remove the DIP switch embrace past hand (pull out the encompass and and so pull it upwardly to release the projection.)

3. After ready the DIP switch, attach the DIP switch embrace

Note: Serial communication settings are assigned with the Memory Switch (baud rate, parity). Employ the memory switch utility included with the Epson driver to fix the values.

three.1 Confirming the Current Settings of the Printer
This printer has two functions to ostend the electric current setting of the printer.
❏ Self test mode
This mode prints all settings of the printer and a character printing test on roll paper.
(Ex: serial communication condition, Bluetooth setting, retentiveness switch setting, etc…)

three.ii Self test mode
The self test lets y’all know if your printer is operating properly. Information technology checks the command circuits, printer mechanisms, print quality, control software version, and DIP switch settings.
This test is independent of any other equipment or software, so it is a good idea that run it when you first fix the printer. If the self exam works correctly, it suggests the problem may be with the other equipment or the software, not the printer.

To Run the Self Exam

1. Brand sure the printer is turned off and the roll paper cover is closed properly.
2. While holding downwards the FEED button, turn on the printer using the switch on the top front of the printer. The self test prints the printer settings and and then prints the following, cuts the newspaper, and pauses.


If you lot want to continue Cocky-Examination press, please press
FEED push button.

iii.3 Resetting the Bluetooth Settings in the Printer
Y’all tin can reset the printer to the default settings by following this procedure. This will reset the printer’s Bluetooth settings (passkey, device name).
1. Open the paper curl cover.
2. Turn the printer On while pressing the FEED button.
3. Press the FEED button
6 times.
4. Close the paper roll cover.
5. The reset instructions are printed. (Open the paper ringlet comprehend, press the FEED push one time or twice, close the paper roll cover.)
The reset begins afterward “Initialize” prints and the newspaper ringlet has been cut. The printer restarts after initialization.
Note: For the TM-P60, initialization completes 30-60 seconds after the paper whorl is cutting.

Tips for Apply

❏ Meet “Advice Range” below for information about Bluetooth communication range.
❏ Place Bluetooth uniform devices away from other electric devices. Do non operate near automatic doors, burn alarms, etc., as a malfunction could occur. Using a device such equally a microwave oven that emits potent loftier-frequency energy may cause interference. If this occurs, relocate the Bluetooth device(s) to a location with less interference.
❏ If a device that uses the same frequency range is located nearby, improper advice may result. If this occurs, relocate the printer device(s) to a location with less interference.
❏ Bluetooth and wireless LAN utilise the same frequency range (ii.4GHz). Using both types of devices near each other can cause interference. Make sure to split by x meters or more than

Windows Driver Installation

The Epson Windows commuter provides the communication link to the TM-P60 printer. It is non possible to use the printer without installing the driver.

Install the Epson Avant-garde Printer Drivers for Windows. Select the printer and port type used. For a TM-P60 Receipt printer, utilize TM-P60 Receipt and Serial Port options.



The commencement step in installing the driver is Calculation the Printer



Choose the Printer from the Pull Down – Information technology’south piece of cake to get lost here!



Mutual Settings for a TM-P60 Printer with Bluetooth (SPP Serial)



The printer should appear in the Printers Folder of the Control Panel when y’all’re done

Note:
The
Tayio SPP
Bluetooth device will appear as an unspecified device even afterwards the printer is installed.

Details on Installing the Windows Commuter

Troubleshooting

Steps to effort commencement

Effort the following basic troubleshooting steps first. They may chop-chop resolve your result.

  1.  If your Bluetooth device(due south) uses batteries, make sure that your batteries are charged.
  2. If your Bluetooth device uses a transceiver that connects to your estimator through a USB port, try connecting the transceiver to another USB port on your computer.
  3. If there are multiple Bluetooth devices connected to your computer, temporarily remove the devices that yous are not troubleshooting. If there are additional USB devices, try removing whatsoever USB devices that you do not accept to have installed during the troubleshooting process. If you take multiple devices that are connected by using USB, this can interfere with a Bluetooth transceiver.
  4. Verify that the Bluetooth device that you are troubleshooting is powered on and that information technology is enabled.
  5. Printing requires an awarding and/or driver designed for this printer. In the case of Windows the Epson Windows printer driver provides the advice link to the TM-P60 printer. It is not possible to test or use the printer without beginning installing the commuter.

Printer Troubleshooting

Q I tin’t print; the light-green ability light is flashing; printer shows as ‘Not Available’ in the printers folder
 A flashing dark-green power light on the TM-P60 indicates that the printer is not connected with the host. A solid lite indicates that the printer has established a network connection with the host. Specifically it shows that the
Epson Port Communication
Service
has established a connection with the printer.

Endeavor stopping then restarting the
Print Spooler

in the Services section of the Windows Control Panel to reset the connection. Permit 1-ii minutes to the connectedness to be reset subsequently restart,

Endeavor restarting the figurer and turning the printer on and off to to a common cold reset.

Q
I cannot connect the TM-P60 to Bluetooth. What should I exercise?


A i Bank check the TM-P60 and host device’s Bluetooth settings.
Use an admin utility to confirm the host device’s Bluetooth settings. Print a TM-P60 cocky test to confirm if the device is recognized. The passkey, device proper name, and Bluetooth address are printed on the self examination. See higher up on details on how to run a self exam.
A .ii Some other network is causing radio wave interference.
Radio wave interference tin can occur if a wireless LAN network is operating in the aforementioned expanse.
Motility the devices to a different expanse if this is the case.
A 3 There is an electric racket source about the TM-P60.
Communication may be impeded if a microwave oven or motor is operating in the same
vicinity. Movement the host device or TM-P60 and check that advice is possible further
away from the noise source.
A 4 Check that the TM-P60 power is On.
Turn on power to the TM-P60 device.
A v Reset the TM-P60 device to its default settings.
Reset the TM-P60 to its default settings. (Run across “Resetting the Printer” above). Reset all
communication settings later doing so.

A 6 There is a problem with the host device.
If available, replace the host device with another functioning host device.

Q
The device is disconnected from the network after connecting for several minutes.

A .1 The host device may be using a ability management or suspend office.
Check that the ability management and suspend functions on the host device are turned off.

Q.
Power to the TM-P60 shuts off after being on several minutes.

A .1 The TM-P60’s automatic power off interval is incorrectly prepare.
If an “Automatic Ability Off Interval” is fix for the memory switch, the TM-P60 volition automatically close off in no data is received during the specified interval. Cheque the TM P60’southward power management function. (See “Memory Switches” (page 2-15).)

Q.
I cannot print.


A .ane TM-P60 power is off.
Turn on power to the TM-P60.
A .2 Power shuts off during printing.
The bombardment has no charge. Supervene upon or charge the battery, or plug in the Air-conditioning adapter.

Windows Troubleshooting

 Make sure that your Bluetooth device is discoverable and that your reckoner is set to enable Bluetooth devices to connect to your calculator
1. Right-click the Bluetooth icon in the notification area, and then click Open Bluetooth Settings.

Annotation If the Bluetooth icon is not in the notification expanse, click Start, click Run, type bthprops.cpl, and then click OK. To use the bthprops.cpl command, make sure that your version of Windows supports your Bluetooth adapter and the Bluetooth adapter has been successfully installed on your Windows based computer.

ii. On the Bluetooth Options tab, click to select the

Plow discovery on
check box, so click Utilize.

3. To enable Bluetooth devices to connect to your computer, click to select the
Allow Bluetooth devices to connect to this computer
bank check box, and then click OK.

4. Check the ports settings in the Ports Tab of the Printer Properties tab in the TM-P60 Printer in the Printers Folder. Compare it to the COM port listed in the Bluetooth Settings.



Find the COM Port used in the Bluetooth Settings



Check the COM Port used in the Printer Properties Tab in the Printers Folder

Avant-garde troubleshooting


•What yous tin can practice if your Bluetooth devices practise not function
•What you can do when your device is not detected

What yous can do when your device is not detected
one.In Device Director in the Windows Control Console, locate Bluetooth Radios, and then verify that the radio is listed.

To do this, open the Device Manager or  follow these steps to open from the Run command:
a. Click Outset, and then click Run.
b. Type
devmgmt.msc, and then click OK.
c. Locate and so click the Bluetooth radio device.

ii.Determine what other USB devices are currently connected. The Bluetooth device may not have enough power.

  • If there are no entries in Device Manager or in Command Panel, the transceiver is not obtaining plenty power for detection. Try unplugging other USB devices.
  • If Device Manager and Command Panel entries exist for a device, but the device is non detected or information technology is not connecting correctly, the device may not have been authenticated through the software.

Notes

  • When the transceiver is unplugged, Windows will remove the Bluetooth Radios category in Device Manager, but the Bluetooth Devices icon will remain in Control Panel.
  • Bluetooth devices typically require 500 milliamps (mA). Determine what other USB devices are connected. You may accept to add a self-powered hub to back up boosted devices on the USB port.
  • If the device does not authenticate during the detection process, remove the device, and so add together it again without a passkey.
  • If previous steps do non resolve the issue, try the device on another estimator. If the device does not work on some other computer, the issue is in Windows.

For More than Information


Epson TM-P60 Printer

Epson TM-P60 Printer App for iOS

Epson TM-P80 Printer

Epson Bluetooth Desktop Adapter Card

Epson mPOS Printers

Star Bluetooth Portable Printers

Zebra Bluetooth Portable Printers

Wireless Printing

How to connect an Ethernet Interface


How to Connect Epson L3110 Printer to Phone

Read:  Alat Dan Bahan Untuk Sharing Printer Di Mataram

You May Also Like